drm/i915/pcode: Extend pcode functions for multiple gt's

Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.

v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
    Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

drivers/gpu/drm/i915/display/hsw_ips.c

@@ -28,7 +28,7 @@ static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
 
 	if (IS_BROADWELL(i915)) {
 		drm_WARN_ON(&i915->drm,
-			    snb_pcode_write(i915, DISPLAY_IPS_CONTROL,
+			    snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL,
 					    IPS_ENABLE | IPS_PCODE_CONTROL));
 		/*
 		 * Quoting Art Runyan: "its not safe to expect any particular
@@ -62,7 +62,7 @@ bool hsw_ips_disable(const struct intel_crtc_state *crtc_state)
 
 	if (IS_BROADWELL(i915)) {
 		drm_WARN_ON(&i915->drm,
-			    snb_pcode_write(i915, DISPLAY_IPS_CONTROL, 0));
+			    snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL, 0));
 		/*
 		 * Wait for PCODE to finish disabling IPS. The BSpec specified
 		 * 42ms timeout value leads to occasional timeouts so use 100ms

drivers/gpu/drm/i915/display/intel_bw.c

@@ -78,7 +78,7 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	u16 dclk;
 	int ret;
 
-	ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+	ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
 			     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point),
 			     &val, &val2);
 	if (ret)
@@ -104,7 +104,7 @@ static int adls_pcode_read_psf_gv_point_info(struct drm_i915_private *dev_priv,
 	int ret;
 	int i;
 
-	ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+	ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
 			     ADL_PCODE_MEM_SS_READ_PSF_GV_INFO, &val, NULL);
 	if (ret)
 		return ret;
@@ -123,7 +123,7 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
 	int ret;
 
 	/* bspec says to keep retrying for at least 1 ms */
-	ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+	ret = skl_pcode_request(&dev_priv->uncore, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
 				points_mask,
 				ICL_PCODE_REP_QGV_MASK | ADLS_PCODE_REP_PSF_MASK,
 				ICL_PCODE_REP_QGV_SAFE | ADLS_PCODE_REP_PSF_SAFE,

drivers/gpu/drm/i915/display/intel_cdclk.c

@@ -800,7 +800,7 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
 		     "trying to change cdclk frequency with cdclk not enabled\n"))
 		return;
 
-	ret = snb_pcode_write(dev_priv, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	ret = snb_pcode_write(&dev_priv->uncore, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
 	if (ret) {
 		drm_err(&dev_priv->drm,
 			"failed to inform pcode about cdclk change\n");
@@ -828,7 +828,7 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
 			 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
 		drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
 
-	snb_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
+	snb_pcode_write(&dev_priv->uncore, HSW_PCODE_DE_WRITE_FREQ_REQ,
 			cdclk_config->voltage_level);
 
 	intel_de_write(dev_priv, CDCLK_FREQ,
@@ -1086,7 +1086,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	drm_WARN_ON_ONCE(&dev_priv->drm,
 			 IS_SKYLAKE(dev_priv) && vco == 8640000);
 
-	ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+	ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
 				SKL_CDCLK_PREPARE_FOR_CHANGE,
 				SKL_CDCLK_READY_FOR_CHANGE,
 				SKL_CDCLK_READY_FOR_CHANGE, 3);
@@ -1132,7 +1132,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	intel_de_posting_read(dev_priv, CDCLK_CTL);
 
 	/* inform PCU of the change */
-	snb_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+	snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
 			cdclk_config->voltage_level);
 
 	intel_update_cdclk(dev_priv);
@@ -1702,7 +1702,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 
 	/* Inform power controller of upcoming frequency change. */
 	if (DISPLAY_VER(dev_priv) >= 11)
-		ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
 					SKL_CDCLK_PREPARE_FOR_CHANGE,
 					SKL_CDCLK_READY_FOR_CHANGE,
 					SKL_CDCLK_READY_FOR_CHANGE, 3);
@@ -1711,7 +1711,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		 * BSpec requires us to wait up to 150usec, but that leads to
 		 * timeouts; the 2ms used here is based on experiment.
 		 */
-		ret = snb_pcode_write_timeout(dev_priv,
+		ret = snb_pcode_write_timeout(&dev_priv->uncore,
 					      HSW_PCODE_DE_WRITE_FREQ_REQ,
 					      0x80000000, 150, 2);
 	if (ret) {
@@ -1774,7 +1774,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
 
 	if (DISPLAY_VER(dev_priv) >= 11) {
-		ret = snb_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+		ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
 				      cdclk_config->voltage_level);
 	} else {
 		/*
@@ -1783,7 +1783,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		 * FIXME: Waiting for the request completion could be delayed
 		 * until the next PCODE request based on BSpec.
 		 */
-		ret = snb_pcode_write_timeout(dev_priv,
+		ret = snb_pcode_write_timeout(&dev_priv->uncore,
 					      HSW_PCODE_DE_WRITE_FREQ_REQ,
 					      cdclk_config->voltage_level,
 					      150, 2);

drivers/gpu/drm/i915/display/intel_display_power.c

@@ -1196,7 +1196,7 @@ static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv)
 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val)
 {
 	if (IS_HASWELL(dev_priv)) {
-		if (snb_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
+		if (snb_pcode_write(&dev_priv->uncore, GEN6_PCODE_WRITE_D_COMP, val))
 			drm_dbg_kms(&dev_priv->drm,
 				    "Failed to write to D_COMP\n");
 	} else {

drivers/gpu/drm/i915/display/intel_display_power_well.c

@@ -474,7 +474,7 @@ static void icl_tc_cold_exit(struct drm_i915_private *i915)
 	int ret, tries = 0;
 
 	while (1) {
-		ret = snb_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0,
+		ret = snb_pcode_write_timeout(&i915->uncore, ICL_PCODE_EXIT_TCCOLD, 0,
 					      250, 1);
 		if (ret != -EAGAIN || ++tries == 3)
 			break;
@@ -1739,7 +1739,7 @@ tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
 		 * Spec states that we should timeout the request after 200us
 		 * but the function below will timeout after 500us
 		 */
-		ret = snb_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val);
+		ret = snb_pcode_read(&i915->uncore, TGL_PCODE_TCCOLD, &low_val, &high_val);
 		if (ret == 0) {
 			if (block &&
 			    (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))

drivers/gpu/drm/i915/display/intel_hdcp.c

@@ -298,7 +298,7 @@ static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
 	 * Mailbox interface.
 	 */
 	if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) {
-		ret = snb_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1);
+		ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_LOAD_HDCP_KEYS, 1);
 		if (ret) {
 			drm_err(&dev_priv->drm,
 				"Failed to initiate HDCP key load (%d)\n",

drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c

@@ -138,7 +138,7 @@ static int gen6_drpc(struct seq_file *m)
 	}
 
 	if (GRAPHICS_VER(i915) <= 7)
-		snb_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
+		snb_pcode_read(gt->uncore, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
 
 	seq_printf(m, "RC1e Enabled: %s\n",
 		   str_yes_no(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
@@ -559,7 +559,7 @@ static int llc_show(struct seq_file *m, void *data)
 	wakeref = intel_runtime_pm_get(gt->uncore->rpm);
 	for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
 		ia_freq = gpu_freq;
-		snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
+		snb_pcode_read(gt->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
 			       &ia_freq, NULL);
 		seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
 			   intel_gpu_freq(rps,

drivers/gpu/drm/i915/gt/intel_llc.c

@@ -124,7 +124,6 @@ static void calc_ia_freq(struct intel_llc *llc,
 
 static void gen6_update_ring_freq(struct intel_llc *llc)
 {
-	struct drm_i915_private *i915 = llc_to_gt(llc)->i915;
 	struct ia_constants consts;
 	unsigned int gpu_freq;
 
@@ -142,7 +141,7 @@ static void gen6_update_ring_freq(struct intel_llc *llc)
 		unsigned int ia_freq, ring_freq;
 
 		calc_ia_freq(llc, gpu_freq, &consts, &ia_freq, &ring_freq);
-		snb_pcode_write(i915, GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
+		snb_pcode_write(llc_to_gt(llc)->uncore, GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
 				ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
 				ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
 				gpu_freq);

drivers/gpu/drm/i915/gt/intel_rc6.c

@@ -271,7 +271,7 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
 	    GEN6_RC_CTL_HW_ENABLE;
 
 	rc6vids = 0;
-	ret = snb_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
+	ret = snb_pcode_read(rc6_to_gt(rc6)->uncore, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
 	if (GRAPHICS_VER(i915) == 6 && ret) {
 		drm_dbg(&i915->drm, "Couldn't check for BIOS workaround\n");
 	} else if (GRAPHICS_VER(i915) == 6 &&
@@ -281,7 +281,7 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
 			GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
 		rc6vids &= 0xffff00;
 		rc6vids |= GEN6_ENCODE_RC6_VID(450);
-		ret = snb_pcode_write(i915, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
+		ret = snb_pcode_write(rc6_to_gt(rc6)->uncore, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
 		if (ret)
 			drm_err(&i915->drm,
 				"Couldn't fix incorrect rc6 voltage\n");

drivers/gpu/drm/i915/gt/intel_rps.c

@@ -1096,7 +1096,8 @@ static void gen6_rps_init(struct intel_rps *rps)
 	    IS_GEN9_BC(i915) || GRAPHICS_VER(i915) >= 11) {
 		u32 ddcc_status = 0;
 
-		if (snb_pcode_read(i915, HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
+		if (snb_pcode_read(rps_to_gt(rps)->uncore,
+				   HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
 				   &ddcc_status, NULL) == 0)
 			rps->efficient_freq =
 				clamp_t(u8,
@@ -1947,7 +1948,7 @@ void intel_rps_init(struct intel_rps *rps)
 	if (GRAPHICS_VER(i915) == 6 || IS_IVYBRIDGE(i915) || IS_HASWELL(i915)) {
 		u32 params = 0;
 
-		snb_pcode_read(i915, GEN6_READ_OC_PARAMS, &params, NULL);
+		snb_pcode_read(rps_to_gt(rps)->uncore, GEN6_READ_OC_PARAMS, &params, NULL);
 		if (params & BIT(31)) { /* OC supported */
 			drm_dbg(&i915->drm,
 				"Overclocking supported, max: %dMHz, overclock: %dMHz\n",

drivers/gpu/drm/i915/gt/selftest_llc.c

@@ -31,7 +31,7 @@ static int gen6_verify_ring_freq(struct intel_llc *llc)
 		calc_ia_freq(llc, gpu_freq, &consts, &ia_freq, &ring_freq);
 
 		val = gpu_freq;
-		if (snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
+		if (snb_pcode_read(llc_to_gt(llc)->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
 				   &val, NULL)) {
 			pr_err("Failed to read freq table[%d], range [%d, %d]\n",
 			       gpu_freq, consts.min_gpu_freq, consts.max_gpu_freq);

drivers/gpu/drm/i915/gt/selftest_rps.c

@@ -521,7 +521,7 @@ static void show_pcu_config(struct intel_rps *rps)
 	for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
 		int ia_freq = gpu_freq;
 
-		snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
+		snb_pcode_read(rps_to_gt(rps)->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
 			       &ia_freq, NULL);
 
 		pr_info("%5d  %5d  %5d\n",

drivers/gpu/drm/i915/i915_driver.c

@@ -634,7 +634,7 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
 
 	intel_opregion_setup(dev_priv);
 
-	ret = intel_pcode_init(dev_priv);
+	ret = intel_pcode_init(&dev_priv->uncore);
 	if (ret)
 		goto err_msi;
 
@@ -1249,7 +1249,7 @@ static int i915_drm_resume(struct drm_device *dev)
 
 	disable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
 
-	ret = intel_pcode_init(dev_priv);
+	ret = intel_pcode_init(&dev_priv->uncore);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/i915/intel_dram.c

@@ -393,7 +393,7 @@ static int icl_pcode_read_mem_global_info(struct drm_i915_private *dev_priv)
 	u32 val = 0;
 	int ret;
 
-	ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+	ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
 			     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO, &val, NULL);
 	if (ret)
 		return ret;

drivers/gpu/drm/i915/intel_pcode.c

@@ -52,14 +52,12 @@ static int gen7_check_mailbox_status(u32 mbox)
 	}
 }
 
-static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
+static int __snb_pcode_rw(struct intel_uncore *uncore, u32 mbox,
 			  u32 *val, u32 *val1,
 			  int fast_timeout_us, int slow_timeout_ms,
 			  bool is_read)
 {
-	struct intel_uncore *uncore = &i915->uncore;
-
-	lockdep_assert_held(&i915->sb_lock);
+	lockdep_assert_held(&uncore->i915->sb_lock);
 
 	/*
 	 * GEN6_PCODE_* are outside of the forcewake domain, we can use
@@ -88,22 +86,22 @@ static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
 	if (is_read && val1)
 		*val1 = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA1);
 
-	if (GRAPHICS_VER(i915) > 6)
+	if (GRAPHICS_VER(uncore->i915) > 6)
 		return gen7_check_mailbox_status(mbox);
 	else
 		return gen6_check_mailbox_status(mbox);
 }
 
-int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1)
+int snb_pcode_read(struct intel_uncore *uncore, u32 mbox, u32 *val, u32 *val1)
 {
 	int err;
 
-	mutex_lock(&i915->sb_lock);
-	err = __snb_pcode_rw(i915, mbox, val, val1, 500, 20, true);
-	mutex_unlock(&i915->sb_lock);
+	mutex_lock(&uncore->i915->sb_lock);
+	err = __snb_pcode_rw(uncore, mbox, val, val1, 500, 20, true);
+	mutex_unlock(&uncore->i915->sb_lock);
 
 	if (err) {
-		drm_dbg(&i915->drm,
+		drm_dbg(&uncore->i915->drm,
 			"warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
 			mbox, __builtin_return_address(0), err);
 	}
@@ -111,18 +109,18 @@ int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1)
 	return err;
 }
 
-int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
+int snb_pcode_write_timeout(struct intel_uncore *uncore, u32 mbox, u32 val,
 			    int fast_timeout_us, int slow_timeout_ms)
 {
 	int err;
 
-	mutex_lock(&i915->sb_lock);
-	err = __snb_pcode_rw(i915, mbox, &val, NULL,
+	mutex_lock(&uncore->i915->sb_lock);
+	err = __snb_pcode_rw(uncore, mbox, &val, NULL,
 			     fast_timeout_us, slow_timeout_ms, false);
-	mutex_unlock(&i915->sb_lock);
+	mutex_unlock(&uncore->i915->sb_lock);
 
 	if (err) {
-		drm_dbg(&i915->drm,
+		drm_dbg(&uncore->i915->drm,
 			"warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
 			val, mbox, __builtin_return_address(0), err);
 	}
@@ -130,18 +128,18 @@ int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
 	return err;
 }
 
-static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
+static bool skl_pcode_try_request(struct intel_uncore *uncore, u32 mbox,
 				  u32 request, u32 reply_mask, u32 reply,
 				  u32 *status)
 {
-	*status = __snb_pcode_rw(i915, mbox, &request, NULL, 500, 0, true);
+	*status = __snb_pcode_rw(uncore, mbox, &request, NULL, 500, 0, true);
 
 	return (*status == 0) && ((request & reply_mask) == reply);
 }
 
 /**
  * skl_pcode_request - send PCODE request until acknowledgment
- * @i915: device private
+ * @uncore: uncore
  * @mbox: PCODE mailbox ID the request is targeted for
  * @request: request ID
  * @reply_mask: mask used to check for request acknowledgment
@@ -158,16 +156,16 @@ static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
  * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
  * other error as reported by PCODE.
  */
-int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
+int skl_pcode_request(struct intel_uncore *uncore, u32 mbox, u32 request,
 		      u32 reply_mask, u32 reply, int timeout_base_ms)
 {
 	u32 status;
 	int ret;
 
-	mutex_lock(&i915->sb_lock);
+	mutex_lock(&uncore->i915->sb_lock);
 
 #define COND \
-	skl_pcode_try_request(i915, mbox, request, reply_mask, reply, &status)
+	skl_pcode_try_request(uncore, mbox, request, reply_mask, reply, &status)
 
 	/*
 	 * Prime the PCODE by doing a request first. Normally it guarantees
@@ -193,35 +191,26 @@ int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
 	 * requests, and for any quirks of the PCODE firmware that delays
 	 * the request completion.
 	 */
-	drm_dbg_kms(&i915->drm,
+	drm_dbg_kms(&uncore->i915->drm,
 		    "PCODE timeout, retrying with preemption disabled\n");
-	drm_WARN_ON_ONCE(&i915->drm, timeout_base_ms > 3);
+	drm_WARN_ON_ONCE(&uncore->i915->drm, timeout_base_ms > 3);
 	preempt_disable();
 	ret = wait_for_atomic(COND, 50);
 	preempt_enable();
 
 out:
-	mutex_unlock(&i915->sb_lock);
+	mutex_unlock(&uncore->i915->sb_lock);
 	return status ? status : ret;
 #undef COND
 }
 
-int intel_pcode_init(struct drm_i915_private *i915)
+int intel_pcode_init(struct intel_uncore *uncore)
 {
-	int ret = 0;
-
-	if (!IS_DGFX(i915))
-		return ret;
-
-	ret = skl_pcode_request(i915, DG1_PCODE_STATUS,
-				DG1_UNCORE_GET_INIT_STATUS,
-				DG1_UNCORE_INIT_STATUS_COMPLETE,
-				DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
-
-	drm_dbg(&i915->drm, "PCODE init status %d\n", ret);
-
-	if (ret)
-		drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n");
+	if (!IS_DGFX(uncore->i915))
+		return 0;
 
-	return ret;
+	return skl_pcode_request(uncore, DG1_PCODE_STATUS,
+				 DG1_UNCORE_GET_INIT_STATUS,
+				 DG1_UNCORE_INIT_STATUS_COMPLETE,
+				 DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
 }

drivers/gpu/drm/i915/intel_pcode.h

@@ -8,17 +8,17 @@
 
 #include <linux/types.h>
 
-struct drm_i915_private;
+struct intel_uncore;
 
-int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1);
-int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
+int snb_pcode_read(struct intel_uncore *uncore, u32 mbox, u32 *val, u32 *val1);
+int snb_pcode_write_timeout(struct intel_uncore *uncore, u32 mbox, u32 val,
 			    int fast_timeout_us, int slow_timeout_ms);
-#define snb_pcode_write(i915, mbox, val)			\
-	snb_pcode_write_timeout(i915, mbox, val, 500, 0)
+#define snb_pcode_write(uncore, mbox, val) \
+	snb_pcode_write_timeout(uncore, mbox, val, 500, 0)
 
-int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
+int skl_pcode_request(struct intel_uncore *uncore, u32 mbox, u32 request,
 		      u32 reply_mask, u32 reply, int timeout_base_ms);
 
-int intel_pcode_init(struct drm_i915_private *i915);
+int intel_pcode_init(struct intel_uncore *uncore);
 
 #endif /* _INTEL_PCODE_H */

drivers/gpu/drm/i915/intel_pm.c

@@ -2874,7 +2874,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 
 		/* read the first set of memory latencies[0:3] */
 		val = 0; /* data0 to be programmed to 0 for first set */
-		ret = snb_pcode_read(dev_priv, GEN9_PCODE_READ_MEM_LATENCY,
+		ret = snb_pcode_read(&dev_priv->uncore, GEN9_PCODE_READ_MEM_LATENCY,
 				     &val, NULL);
 
 		if (ret) {
@@ -2893,7 +2893,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 
 		/* read the second set of memory latencies[4:7] */
 		val = 1; /* data0 to be programmed to 1 for second set */
-		ret = snb_pcode_read(dev_priv, GEN9_PCODE_READ_MEM_LATENCY,
+		ret = snb_pcode_read(&dev_priv->uncore, GEN9_PCODE_READ_MEM_LATENCY,
 				     &val, NULL);
 		if (ret) {
 			drm_err(&dev_priv->drm,
@@ -3679,7 +3679,7 @@ intel_sagv_block_time(struct drm_i915_private *dev_priv)
 		u32 val = 0;
 		int ret;
 
-		ret = snb_pcode_read(dev_priv,
+		ret = snb_pcode_read(&dev_priv->uncore,
 				     GEN12_PCODE_READ_SAGV_BLOCK_TIME_US,
 				     &val, NULL);
 		if (ret) {
@@ -3748,7 +3748,7 @@ static void skl_sagv_enable(struct drm_i915_private *dev_priv)
 		return;
 
 	drm_dbg_kms(&dev_priv->drm, "Enabling SAGV\n");
-	ret = snb_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+	ret = snb_pcode_write(&dev_priv->uncore, GEN9_PCODE_SAGV_CONTROL,
 			      GEN9_SAGV_ENABLE);
 
 	/* We don't need to wait for SAGV when enabling */
@@ -3781,7 +3781,7 @@ static void skl_sagv_disable(struct drm_i915_private *dev_priv)
 
 	drm_dbg_kms(&dev_priv->drm, "Disabling SAGV\n");
 	/* bspec says to keep retrying for at least 1 ms */
-	ret = skl_pcode_request(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+	ret = skl_pcode_request(&dev_priv->uncore, GEN9_PCODE_SAGV_CONTROL,
 				GEN9_SAGV_DISABLE,
 				GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
 				1);