ARM: OMAP2+: clean up some cppcheck warnings

Resolve some warnings identified by cppcheck in arch/arm/mach-omap2:

    [arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned variable 'tmp' is less than zero.
    [arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer dereference: irq_setup - otherwise it is redundant to check if irq_setup is null at line 247
    [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is assigned a value that is never used
    [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is assigned a value that is never used
    [arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is assigned a value that is never used
    [arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference: mux
    [arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference: mux
    [arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is assigned a value that is never used
    [arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference: pdata - otherwise it is redundant to check if pdata is null at line 57
    [arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a value that is never used
    [arch/arm/mach-omap2/board-omap3evm.c:641] -> [arch/arm/mach-omap2/board-omap3evm.c:639]: (style) Found duplicate branches for if and else.
    [arch/arm/mach-omap2/am35xx-emac.c:95]: (style) Variable 'regval' is assigned a value that is never used
    [arch/arm/mach-omap2/devices.c:74]: (style) Variable 'l' is assigned a value that is never used
    [arch/arm/mach-omap2/pm34xx.c:277]: (style) Variable 'per_prev_state' is assigned a value that is never used
    [arch/arm/plat-omap/dmtimer.c:352]: (error) Possible null pointer dereference: timer - otherwise it is redundant to check if timer is null at line 354
    [arch/arm/plat-omap/omap_device.c:478]: (style) Variable 'c' is assigned a value that is never used
    [arch/arm/plat-omap/usb.c:42]: (style) Variable 'status' is assigned a value that is never used
    [arch/arm/mach-omap1/clock.c:197]: (style) Variable 'dpll1_rate' is assigned a value that is never used
    [arch/arm/mach-omap1/lcd_dma.c:60]: (style) struct or union member 'lcd_dma_info::size' is never used
    [arch/arm/mach-omap1/pm.c:572]: (style) Variable 'entry' is assigned a value that is never used

Some of them are pretty good catches, such as gpio.c:56 and
usb-tusb6010.c:129.

Thanks to Jarkko Nikula for some comments on the sscanf() warnings.
It seems that the kernel sscanf() ignores the field width anyway for the
%d format, so those changes have been dropped from this second version.

Thanks to Daniel Marjamäki <daniel.marjamaki@gmail.com> for pointing
out that a variable was unnecessarily marked static in the
board-omap3evm.c change.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Charulatha Varadarajan <charu@ti.com>
Cc: Daniel Marjamäki <daniel.marjamaki@gmail.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Charulatha Varadarajan <charu@ti.com> # for gpio.c

arch/arm/mach-omap1/clock.c

@@ -194,9 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
-	unsigned long dpll1_rate, ref_rate;
+	unsigned long ref_rate;
 
-	dpll1_rate = ck_dpll1_p->rate;
 	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {

arch/arm/mach-omap1/lcd_dma.c

@@ -57,7 +57,7 @@ static struct lcd_dma_info {
 	void *cb_data;
 
 	int active;
-	unsigned long addr, size;
+	unsigned long addr;
 	int rotate, data_type, xres, yres;
 	int vxres;
 	int mirror;

arch/arm/mach-omap1/pm.c

@@ -569,11 +569,10 @@ static int omap_pm_read_proc(
 
 static void omap_pm_init_proc(void)
 {
-	struct proc_dir_entry *entry;
-
-	entry = create_proc_read_entry("driver/omap_pm",
-				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, NULL);
+	/* XXX Appears to leak memory */
+	create_proc_read_entry("driver/omap_pm",
+			       S_IWUSR | S_IRUGO, NULL,
+			       omap_pm_read_proc, NULL);
 }
 
 #endif /* DEBUG && CONFIG_PROC_FS */

arch/arm/mach-omap2/am35xx-emac.c

@@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = {
 
 static void am35xx_enable_emac_int(void)
 {
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	u32 v;
+
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+	      AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static void am35xx_disable_emac_int(void)
 {
-	u32 regval;
+	u32 v;
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static struct emac_platform_data am35xx_emac_pdata = {
@@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = {
 
 void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 {
-	unsigned int regval;
+	u32 v;
 	int err;
 
 	am35xx_emac_pdata.rmii_en = rmii_en;
@@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 		return;
 	}
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v &= ~AM35XX_CPGMACSS_SW_RST;
+	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
+	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }

arch/arm/mach-omap2/board-omap3evm.c

@@ -630,13 +630,13 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 
 static void __init omap3_evm_init(void)
 {
+	struct omap_board_mux *obm;
+
 	omap3_evm_get_revision();
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	if (cpu_is_omap3630())
-		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
-	else
-		omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
+	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
+	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);

arch/arm/mach-omap2/devices.c

@@ -42,7 +42,6 @@
 
 static int __init omap3_l3_init(void)
 {
-	int l;
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -54,7 +53,7 @@ static int __init omap3_l3_init(void)
 	if (!(cpu_is_omap34xx()))
 		return -ENODEV;
 
-	l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+	snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
 
 	oh = omap_hwmod_lookup(oh_name);
 
@@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init);
 
 static int __init omap4_l3_init(void)
 {
-	int l, i;
+	int i;
 	struct omap_hwmod *oh[3];
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -89,7 +88,7 @@ static int __init omap4_l3_init(void)
 		return -ENODEV;
 
 	for (i = 0; i < L3_MODULES; i++) {
-		l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
+		snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
 
 		oh[i] = omap_hwmod_lookup(oh_name);
 		if (!(oh[i]))

arch/arm/mach-omap2/gpio.c

@@ -58,7 +58,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata) {
+	if (!pdata->regs) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
 		return -ENOMEM;
 	}

arch/arm/mach-omap2/gpmc-onenand.c

@@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wpl  = 40;
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
 	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
 	int cs = cfg->cs, freq = *freq_ptr;
@@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		break;
 	}
 
-	tick_ns = gpmc_ticks_to_ns(1);
 	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */

arch/arm/mach-omap2/mux.c

@@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val)
 	int mux_mode;
 
 	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
-	if (mux_mode < 0)
+	if (mux_mode < 0 || !mux)
 		return mux_mode;
 
 	old_mode = omap_mux_read(partition, mux->reg_offset);

arch/arm/mach-omap2/pm24xx.c

@@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
-	int only_idle = 0;
-
 	/* Putting MPU into the WFI state while a transfer is active
 	 * seems to cause the I2C block to timeout. Why? Good question. */
 	if (omap2_i2c_active())
@@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void)
 
 		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 						 OMAP2_PM_PWSTCTRL);
-		only_idle = 1;
 	}
 
 	omap2_sram_idle();

arch/arm/mach-omap2/pm34xx.c

@@ -273,7 +273,7 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state, per_prev_state;
+	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -375,10 +375,8 @@ void omap_sram_idle(void)
 	pwrdm_post_transition();
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
@@ -702,7 +700,7 @@ static void __init pm_errata_configure(void)
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
-	struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
+	struct clockdomain *neon_clkdm, *mpu_clkdm;
 	int ret;
 
 	if (!cpu_is_omap34xx())
@@ -757,8 +755,6 @@ static int __init omap3_pm_init(void)
 
 	neon_clkdm = clkdm_lookup("neon_clkdm");
 	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	per_clkdm = clkdm_lookup("per_clkdm");
-	core_clkdm = clkdm_lookup("core_clkdm");
 
 #ifdef CONFIG_SUSPEND
 	omap_pm_suspend = omap3_pm_suspend;

arch/arm/mach-omap2/prm_common.c

@@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void)
  */
 int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 {
-	int nr_regs = irq_setup->nr_regs;
+	int nr_regs;
 	u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
 	int offset, i;
 	struct irq_chip_generic *gc;
@@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	if (!irq_setup)
 		return -EINVAL;
 
+	nr_regs = irq_setup->nr_regs;
+
 	if (prcm_irq_setup) {
 		pr_err("PRCM: already initialized; won't reinitialize\n");
 		return -EINVAL;

arch/arm/mach-omap2/usb-tusb6010.c

@@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
 	tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
 	if (tmp > 4)
 		return -ERANGE;
-	if (tmp <= 0)
+	if (tmp == 0)
 		tmp = 1;
 	t.page_burst_access = (fclk_ps * tmp) / 1000;
 

arch/arm/plat-omap/dmtimer.c

@@ -349,11 +349,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 int omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
 	unsigned long rate = 0;
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
 		return -EINVAL;
 
+	pdata = timer->pdev->dev.platform_data;
 	if (!pdata->needs_manual_reset)
 		rate = clk_get_rate(timer->fclk);
 

arch/arm/plat-omap/omap_device.c

@@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od)
 static int omap_device_fill_resources(struct omap_device *od,
 				      struct resource *res)
 {
-	int c = 0;
 	int i, r;
 
 	for (i = 0; i < od->hwmods_cnt; i++) {
 		r = omap_hwmod_fill_resources(od->hwmods[i], res);
 		res += r;
-		c += r;
 	}
 
 	return 0;

arch/arm/plat-omap/usb.c

@@ -136,8 +136,6 @@ omap_otg_init(struct omap_usb_config *config)
 #endif
 	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 	omap_writel(syscon, OTG_SYSCON_1);
-
-	status = 0;
 }
 
 #else