Commit eef2b53a authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Lee Jones

mfd: axp20x: Correct AXP806 POK interrupt prefix

When AXP806 support was added, POK was incorrectly expanded to PWROK.
However, the datasheet lists them as POK[LSNP], which is the same as
on the AXP288. Furthermore, the registers associated with POK functions
are the same as the PEK on the other AXP PMICs. This suggests that
"POK" means "Power On Key", much like "PEK" means "Power Enable Key",
instead of "Power OK".

This patch changes the "PWROK" prefix to "POK" for these interrupts.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent e26f87e5
......@@ -450,11 +450,11 @@ static const struct regmap_irq axp806_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5),
INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6),
INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7),
INIT_REGMAP_IRQ(AXP806, PWROK_LONG, 1, 0),
INIT_REGMAP_IRQ(AXP806, PWROK_SHORT, 1, 1),
INIT_REGMAP_IRQ(AXP806, POK_LONG, 1, 0),
INIT_REGMAP_IRQ(AXP806, POK_SHORT, 1, 1),
INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4),
INIT_REGMAP_IRQ(AXP806, PWROK_FALL, 1, 5),
INIT_REGMAP_IRQ(AXP806, PWROK_RISE, 1, 6),
INIT_REGMAP_IRQ(AXP806, POK_FALL, 1, 5),
INIT_REGMAP_IRQ(AXP806, POK_RISE, 1, 6),
};
static const struct regmap_irq axp809_regmap_irqs[] = {
......
......@@ -592,11 +592,11 @@ enum axp806_irqs {
AXP806_IRQ_DCDCC_V_LOW,
AXP806_IRQ_DCDCD_V_LOW,
AXP806_IRQ_DCDCE_V_LOW,
AXP806_IRQ_PWROK_LONG,
AXP806_IRQ_PWROK_SHORT,
AXP806_IRQ_POK_LONG,
AXP806_IRQ_POK_SHORT,
AXP806_IRQ_WAKEUP,
AXP806_IRQ_PWROK_FALL,
AXP806_IRQ_PWROK_RISE,
AXP806_IRQ_POK_FALL,
AXP806_IRQ_POK_RISE,
};
enum axp809_irqs {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment