iommu/mediatek: Support report iova 34bit translation fault in ISR

If the iova is over 32bit, the fault status register bit is a little
different.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-23-yong.wu@mediatek.comSigned-off-by: Will Deacon <will@kernel.org>

drivers/iommu/mtk_iommu.c

@@ -3,6 +3,7 @@
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
  */
+#include <linux/bitfield.h>
 #include <linux/bug.h>
 #include <linux/clk.h>
 #include <linux/component.h>
@@ -89,6 +90,9 @@
 #define F_REG_MMU1_FAULT_MASK			GENMASK(13, 7)
 
 #define REG_MMU0_FAULT_VA			0x13c
+#define F_MMU_INVAL_VA_31_12_MASK		GENMASK(31, 12)
+#define F_MMU_INVAL_VA_34_32_MASK		GENMASK(11, 9)
+#define F_MMU_INVAL_PA_34_32_MASK		GENMASK(8, 6)
 #define F_MMU_FAULT_VA_WRITE_BIT		BIT(1)
 #define F_MMU_FAULT_VA_LAYER_BIT		BIT(0)
 
@@ -246,8 +250,9 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 {
 	struct mtk_iommu_data *data = dev_id;
 	struct mtk_iommu_domain *dom = data->m4u_dom;
-	u32 int_state, regval, fault_iova, fault_pa;
 	unsigned int fault_larb, fault_port, sub_comm = 0;
+	u32 int_state, regval, va34_32, pa34_32;
+	u64 fault_iova, fault_pa;
 	bool layer, write;
 
 	/* Read error info from registers */
@@ -263,6 +268,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	}
 	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) {
+		va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
+		pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
+		fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
+		fault_iova |= (u64)va34_32 << 32;
+		fault_pa |= (u64)pa34_32 << 32;
+	}
+
 	fault_port = F_MMU_INT_ID_PORT_ID(regval);
 	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
 		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
@@ -276,7 +289,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
 		dev_err_ratelimited(
 			data->dev,
-			"fault type=0x%x iova=0x%x pa=0x%x larb=%d port=%d layer=%d %s\n",
+			"fault type=0x%x iova=0x%llx pa=0x%llx larb=%d port=%d layer=%d %s\n",
 			int_state, fault_iova, fault_pa, fault_larb, fault_port,
 			layer, write ? "write" : "read");
 	}