Merge branch 'r8152'

Hayes Wang says:

====================
r8152: couldn't read OCP_SRAM_DATA

Read OCP_SRAM_DATA would read additional bytes and may let
the hw abnormal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/r8152.c

@@ -833,9 +833,6 @@ static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
 		index &= ~3;
 	}
 
-	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
-
-	data |= __le32_to_cpu(tmp) & ~mask;
 	tmp = __cpu_to_le32(data);
 
 	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
@@ -874,9 +871,6 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
 		index &= ~3;
 	}
 
-	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
-
-	data |= __le32_to_cpu(tmp) & ~mask;
 	tmp = __cpu_to_le32(data);
 
 	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
@@ -926,12 +920,6 @@ static void sram_write(struct r8152 *tp, u16 addr, u16 data)
 	ocp_reg_write(tp, OCP_SRAM_DATA, data);
 }
 
-static u16 sram_read(struct r8152 *tp, u16 addr)
-{
-	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
-	return ocp_reg_read(tp, OCP_SRAM_DATA);
-}
-
 static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
 {
 	struct r8152 *tp = netdev_priv(netdev);
@@ -2518,24 +2506,18 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
 	data = ocp_reg_read(tp, OCP_POWER_CFG);
 	data |= EN_10M_PLLOFF;
 	ocp_reg_write(tp, OCP_POWER_CFG, data);
-	data = sram_read(tp, SRAM_IMPEDANCE);
-	data &= ~RX_DRIVING_MASK;
-	sram_write(tp, SRAM_IMPEDANCE, data);
+	sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
 
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
 	ocp_data |= PFM_PWM_SWITCH;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
 
-	data = sram_read(tp, SRAM_LPF_CFG);
-	data |= LPF_AUTO_TUNE;
-	sram_write(tp, SRAM_LPF_CFG, data);
+	/* Enable LPF corner auto tune */
+	sram_write(tp, SRAM_LPF_CFG, 0xf70f);
 
-	data = sram_read(tp, SRAM_10M_AMP1);
-	data |= GDAC_IB_UPALL;
-	sram_write(tp, SRAM_10M_AMP1, data);
-	data = sram_read(tp, SRAM_10M_AMP2);
-	data |= AMP_DN;
-	sram_write(tp, SRAM_10M_AMP2, data);
+	/* Adjust 10M Amplitude */
+	sram_write(tp, SRAM_10M_AMP1, 0x00af);
+	sram_write(tp, SRAM_10M_AMP2, 0x0208);
 
 	set_bit(PHY_RESET, &tp->flags);
 }