ARM: dts: dra7: Add CPSW and MDIO module nodes for dra7

Add CPSW and MDIO related device tree data for DRA7XX and made as status
disabled. Phy-id, pinmux for active and sleep state needs to be added in
board dts files and enable the CPSW device.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/dra7.dtsi

@@ -34,6 +34,8 @@ aliases {
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	timer {
@@ -1341,6 +1343,65 @@ crossbar_mpu: crossbar@4a020000 {
 			ti,irqs-skip = <10 133 139 140>;
 			ti,irqs-safe-map = <0>;
 		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "gmac";
+			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x48484000 0x1000
+			       0x48485200 0x2E00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * rx_thresh_pend
+			 * rx_pend
+			 * tx_pend
+			 * misc_pend
+			 */
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+			ranges;
+			status = "disabled";
+
+			davinci_mdio: mdio@48485000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x48485000 0x100>;
+			};
+
+			cpsw_emac0: slave@48480200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@48480300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@4a002554 {
+				compatible = "ti,dra7xx-cpsw-phy-sel";
+				reg= <0x4a002554 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
 	};
 };