usb: gadget: aspeed: Don't reject requests on suspended devices

A disconnect may just suspend the hub in absence of a physical
disconnect detection. If we start rejecting requests, the mass
storage function gets into a spin trying to requeue the same
request for ever and hangs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/gadget/udc/aspeed-vhub/dev.c

@@ -204,14 +204,19 @@ int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
 	u16 wValue, wIndex;
 
 	/* No driver, we shouldn't be enabled ... */
-	if (!d->driver || !d->enabled || d->suspended) {
+	if (!d->driver || !d->enabled) {
 		EPDBG(ep,
-		      "Device is wrong state driver=%p enabled=%d"
-		      " suspended=%d\n",
-		      d->driver, d->enabled, d->suspended);
+		      "Device is wrong state driver=%p enabled=%d\n",
+		      d->driver, d->enabled);
 		return std_req_stall;
 	}
 
+	/*
+	 * Note: we used to reject/stall requests while suspended,
+	 * we don't do that anymore as we seem to have cases of
+	 * mass storage getting very upset.
+	 */
+
 	/* First packet, grab speed */
 	if (d->gadget.speed == USB_SPEED_UNKNOWN) {
 		d->gadget.speed = ep->vhub->speed;

drivers/usb/gadget/udc/aspeed-vhub/ep0.c

@@ -379,7 +379,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 		return -EINVAL;
 
 	/* Disabled device */
-	if (ep->dev && (!ep->dev->enabled || ep->dev->suspended))
+	if (ep->dev && !ep->dev->enabled)
 		return -ESHUTDOWN;
 
 	/* Data, no buffer and not internal ? */

drivers/usb/gadget/udc/aspeed-vhub/epn.c

@@ -352,7 +352,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 
 	/* Endpoint enabled ? */
 	if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx ||
-	    !ep->dev->enabled || ep->dev->suspended) {
+	    !ep->dev->enabled) {
 		EPDBG(ep, "Enqueuing request on wrong or disabled EP\n");
 		return -ESHUTDOWN;
 	}