Commit efa767b3 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'imx-fixes-5.15' of...

Merge tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.15:

- Revert cc8870bf to fix the regression on i.MX6 that suspend
  support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
  imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig.  It gets lost due to
  f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.

* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: enable fb
  ARM: dts: imx6qdl-pico: Fix Ethernet support
  ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
  ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
  Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
  ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe

Link: https://lore.kernel.org/r/20210923063356.GK13480@dragonSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents a6949059 c5446748
......@@ -56,6 +56,7 @@ eth {
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
pinctrl-names = "default";
enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
port {
......@@ -76,8 +77,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio = <&gpio1 2 0>;
};
};
......
......@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
......@@ -277,6 +278,7 @@ chan@0 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
chan@1 {
......@@ -284,6 +286,7 @@ chan@1 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
};
chan@2 {
......@@ -291,6 +294,7 @@ chan@2 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
};
chan@3 {
......@@ -298,6 +302,7 @@ chan@3 {
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
reg = <3>;
color = <LED_COLOR_ID_WHITE>;
};
};
......
......@@ -176,7 +176,18 @@ &fec {
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@1 {
reg = <1>;
qca,clk-out-frequency = <125000000>;
};
};
};
&hdmi {
......
......@@ -292,6 +292,7 @@ CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_MXSFB=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
......
......@@ -172,6 +172,9 @@ static void __init imx6q_init_machine(void)
imx_get_soc_revision());
imx6q_enet_phy_init();
of_platform_default_populate(NULL, NULL, NULL);
imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
imx6q_1588_init();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment