Merge tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number fixes this time, mostly touching actual code:

   - Add platform device for i.MX System Reset Controller (SRC) to
     fix a regression caused by fw_devlink change

   - A fixup for a boot regression caused by my own rework for the
     Qualcomm SCM driver

   - Multiple bugfixes for the Arm FFA and optee firmware drivers,
     addressing problems when they are built as a loadable module

   - Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
     addressing VEC (video encoder), MDIO bus controller
     #address-cells/#size-cells, SDIO voltage and PCIe host bridge
     dtc warnings"

* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: imx: register reset controller from a platform driver
  iommu/arm: fix ARM_SMMU_QCOM compilation
  ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
  ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
  tee: optee: Fix missing devices unregister during optee_remove
  ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
  ARM: dts: bcm2711: fix MDIO #address- and #size-cells
  ARM: dts: bcm283x: Fix VEC address for BCM2711
  firmware: arm_ffa: Fix __ffa_devices_unregister
  firmware: arm_ffa: Add missing remove callback to ffa_bus_type

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -40,8 +40,8 @@ sd_io_1v8_reg: sd_io_1v8_reg {
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
@@ -217,15 +217,16 @@ phy1: ethernet-phy@1 {
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};

arch/arm/boot/dts/bcm2711.dtsi

@@ -300,6 +300,14 @@ pixelvalve3: pixelvalve@7ec12000 {
 			status = "disabled";
 		};
 
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dvp: clock@7ef00000 {
 			compatible = "brcm,brcm2711-dvp";
 			reg = <0x7ef00000 0x10>;
@@ -532,8 +540,8 @@ genet_mdio: mdio@e14 {
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
 	};

arch/arm/boot/dts/bcm2835-common.dtsi

@@ -106,6 +106,14 @@ i2c2: i2c@7e805000 {
 			status = "okay";
 		};
 
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
 		pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;

arch/arm/boot/dts/bcm283x.dtsi

@@ -464,14 +464,6 @@ i2c1: i2c@7e804000 {
 			status = "disabled";
 		};
 
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
 		usb: usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;

arch/arm/mach-imx/src.c

@@ -9,6 +9,7 @@
 #include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
@@ -81,11 +82,6 @@ static const struct reset_control_ops imx_src_ops = {
 	.reset = imx_src_reset_module,
 };
 
-static struct reset_controller_dev imx_reset_controller = {
-	.ops = &imx_src_ops,
-	.nr_resets = ARRAY_SIZE(sw_reset_bits),
-};
-
 static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
 {
 	writel_relaxed(enable, gpc_base + offset);
@@ -177,10 +173,6 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
-	imx_reset_controller.of_node = np;
-	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
-		reset_controller_register(&imx_reset_controller);
-
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
@@ -214,3 +206,33 @@ void __init imx7_src_init(void)
 	if (!gpc_base)
 		return;
 }
+
+static const struct of_device_id imx_src_dt_ids[] = {
+	{ .compatible = "fsl,imx51-src" },
+	{ /* sentinel */ }
+};
+
+static int imx_src_probe(struct platform_device *pdev)
+{
+	struct reset_controller_dev *rcdev;
+
+	rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
+	if (!rcdev)
+		return -ENOMEM;
+
+	rcdev->ops = &imx_src_ops;
+	rcdev->dev = &pdev->dev;
+	rcdev->of_node = pdev->dev.of_node;
+	rcdev->nr_resets = ARRAY_SIZE(sw_reset_bits);
+
+	return devm_reset_controller_register(&pdev->dev, rcdev);
+}
+
+static struct platform_driver imx_src_driver = {
+	.driver = {
+		.name = "imx-src",
+		.of_match_table = imx_src_dt_ids,
+	},
+	.probe = imx_src_probe,
+};
+builtin_platform_driver(imx_src_driver);

drivers/firmware/arm_ffa/bus.c

@@ -49,6 +49,13 @@ static int ffa_device_probe(struct device *dev)
 	return ffa_drv->probe(ffa_dev);
 }
 
+static void ffa_device_remove(struct device *dev)
+{
+	struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver);
+
+	ffa_drv->remove(to_ffa_dev(dev));
+}
+
 static int ffa_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct ffa_device *ffa_dev = to_ffa_dev(dev);
@@ -86,6 +93,7 @@ struct bus_type ffa_bus_type = {
 	.name		= "arm_ffa",
 	.match		= ffa_device_match,
 	.probe		= ffa_device_probe,
+	.remove		= ffa_device_remove,
 	.uevent		= ffa_device_uevent,
 	.dev_groups	= ffa_device_attributes_groups,
 };
@@ -127,7 +135,7 @@ static void ffa_release_device(struct device *dev)
 
 static int __ffa_devices_unregister(struct device *dev, void *data)
 {
-	ffa_release_device(dev);
+	device_unregister(dev);
 
 	return 0;
 }

drivers/iommu/Kconfig

@@ -355,6 +355,14 @@ config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT
 	  'arm-smmu.disable_bypass' will continue to override this
 	  config.
 
+config ARM_SMMU_QCOM
+	def_tristate y
+	depends on ARM_SMMU && ARCH_QCOM
+	select QCOM_SCM
+	help
+	  When running on a Qualcomm platform that has the custom variant
+	  of the ARM SMMU, this needs to be built into the SMMU driver.
+
 config ARM_SMMU_V3
 	tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
 	depends on ARM64

drivers/tee/optee/core.c

@@ -585,6 +585,9 @@ static int optee_remove(struct platform_device *pdev)
 {
 	struct optee *optee = platform_get_drvdata(pdev);
 
+	/* Unregister OP-TEE specific client devices on TEE bus */
+	optee_unregister_devices();
+
 	/*
 	 * Ask OP-TEE to free all cached shared memory objects to decrease
 	 * reference counters and also avoid wild pointers in secure world

drivers/tee/optee/device.c

@@ -53,6 +53,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
 	return 0;
 }
 
+static void optee_release_device(struct device *dev)
+{
+	struct tee_client_device *optee_device = to_tee_client_device(dev);
+
+	kfree(optee_device);
+}
+
 static int optee_register_device(const uuid_t *device_uuid)
 {
 	struct tee_client_device *optee_device = NULL;
@@ -63,6 +70,7 @@ static int optee_register_device(const uuid_t *device_uuid)
 		return -ENOMEM;
 
 	optee_device->dev.bus = &tee_bus_type;
+	optee_device->dev.release = optee_release_device;
 	if (dev_set_name(&optee_device->dev, "optee-ta-%pUb", device_uuid)) {
 		kfree(optee_device);
 		return -ENOMEM;
@@ -154,3 +162,17 @@ int optee_enumerate_devices(u32 func)
 {
 	return  __optee_enumerate_devices(func);
 }
+
+static int __optee_unregister_device(struct device *dev, void *data)
+{
+	if (!strncmp(dev_name(dev), "optee-ta", strlen("optee-ta")))
+		device_unregister(dev);
+
+	return 0;
+}
+
+void optee_unregister_devices(void)
+{
+	bus_for_each_dev(&tee_bus_type, NULL, NULL,
+			 __optee_unregister_device);
+}

drivers/tee/optee/optee_private.h

@@ -184,6 +184,7 @@ void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
 #define PTA_CMD_GET_DEVICES		0x0
 #define PTA_CMD_GET_DEVICES_SUPP	0x1
 int optee_enumerate_devices(u32 func);
+void optee_unregister_devices(void);
 
 /*
  * Small helpers