Merge tag 'loongarch-fixes-6.10-1' of...

Merge tag 'loongarch-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bootloader interface fixes, a dts fix, and a trivial cleanup"

* tag 'loongarch-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix GMAC's phy-mode definitions in dts
  LoongArch: Override higher address bits in JUMP_VIRT_ADDR
  LoongArch: Fix entry point in kernel image header
  LoongArch: Add all CPUs enabled by fdt to NUMA node 0
  LoongArch: Fix built-in DTB detection
  LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init()

arch/loongarch/boot/dts/loongson-2k0500-ref.dts

@@ -44,14 +44,14 @@ linux,cma {
 &gmac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	bus_id = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	bus_id = <0x1>;
 };
 

arch/loongarch/boot/dts/loongson-2k1000-ref.dts

@@ -43,7 +43,7 @@ linux,cma {
 &gmac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -58,7 +58,7 @@ phy0: ethernet-phy@0 {
 &gmac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy1>;
 	mdio {
 		compatible = "snps,dwmac-mdio";

arch/loongarch/boot/dts/loongson-2k2000-ref.dts

@@ -92,7 +92,7 @@ phy1: ethernet-phy@1 {
 &gmac2 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy2>;
 	mdio {
 		compatible = "snps,dwmac-mdio";

arch/loongarch/include/asm/numa.h

@@ -56,6 +56,7 @@ extern int early_cpu_to_node(int cpu);
 static inline void early_numa_add_cpu(int cpuid, s16 node)	{ }
 static inline void numa_add_cpu(unsigned int cpu)		{ }
 static inline void numa_remove_cpu(unsigned int cpu)		{ }
+static inline void set_cpuid_to_node(int cpuid, s16 node)	{ }
 
 static inline int early_cpu_to_node(int cpu)
 {

arch/loongarch/include/asm/stackframe.h

@@ -42,7 +42,7 @@
 	.macro JUMP_VIRT_ADDR temp1 temp2
 	li.d	\temp1, CACHE_BASE
 	pcaddi	\temp2, 0
-	or	\temp1, \temp1, \temp2
+	bstrins.d  \temp1, \temp2, (DMW_PABITS - 1), 0
 	jirl	zero, \temp1, 0xc
 	.endm
 

arch/loongarch/kernel/head.S

@@ -22,7 +22,7 @@
 _head:
 	.word	MZ_MAGIC		/* "MZ", MS-DOS header */
 	.org	0x8
-	.dword	kernel_entry		/* Kernel entry point */
+	.dword	_kernel_entry		/* Kernel entry point (physical address) */
 	.dword	_kernel_asize		/* Kernel image effective size */
 	.quad	PHYS_LINK_KADDR		/* Kernel image load offset from start of RAM */
 	.org	0x38			/* 0x20 ~ 0x37 reserved */

arch/loongarch/kernel/setup.c

@@ -282,7 +282,7 @@ static void __init fdt_setup(void)
 		return;
 
 	/* Prefer to use built-in dtb, checking its legality first. */
-	if (!fdt_check_header(__dtb_start))
+	if (IS_ENABLED(CONFIG_BUILTIN_DTB) && !fdt_check_header(__dtb_start))
 		fdt_pointer = __dtb_start;
 	else
 		fdt_pointer = efi_fdt_pointer(); /* Fallback to firmware dtb */
@@ -351,10 +351,8 @@ void __init platform_init(void)
 	arch_reserve_vmcore();
 	arch_reserve_crashkernel();
 
-#ifdef CONFIG_ACPI_TABLE_UPGRADE
-	acpi_table_upgrade();
-#endif
 #ifdef CONFIG_ACPI
+	acpi_table_upgrade();
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
 #endif

arch/loongarch/kernel/smp.c

@@ -273,7 +273,6 @@ static void __init fdt_smp_setup(void)
 
 		if (cpuid == loongson_sysconf.boot_cpu_id) {
 			cpu = 0;
-			numa_add_cpu(cpu);
 		} else {
 			cpu = cpumask_next_zero(-1, cpu_present_mask);
 		}
@@ -283,6 +282,9 @@ static void __init fdt_smp_setup(void)
 		set_cpu_present(cpu, true);
 		__cpu_number_map[cpuid] = cpu;
 		__cpu_logical_map[cpu] = cpuid;
+
+		early_numa_add_cpu(cpu, 0);
+		set_cpuid_to_node(cpuid, 0);
 	}
 
 	loongson_sysconf.nr_cpus = num_processors;
@@ -468,6 +470,7 @@ void smp_prepare_boot_cpu(void)
 	set_cpu_possible(0, true);
 	set_cpu_online(0, true);
 	set_my_cpu_offset(per_cpu_offset(0));
+	numa_add_cpu(0);
 
 	rr_node = first_node(node_online_map);
 	for_each_possible_cpu(cpu) {

arch/loongarch/kernel/vmlinux.lds.S

@@ -6,6 +6,7 @@
 
 #define PAGE_SIZE _PAGE_SIZE
 #define RO_EXCEPTION_TABLE_ALIGN	4
+#define PHYSADDR_MASK			0xffffffffffff /* 48-bit */
 
 /*
  * Put .bss..swapper_pg_dir as the first thing in .bss. This will
@@ -142,10 +143,11 @@ SECTIONS
 
 #ifdef CONFIG_EFI_STUB
 	/* header symbols */
-	_kernel_asize = _end - _text;
-	_kernel_fsize = _edata - _text;
-	_kernel_vsize = _end - __initdata_begin;
-	_kernel_rsize = _edata - __initdata_begin;
+	_kernel_entry = ABSOLUTE(kernel_entry & PHYSADDR_MASK);
+	_kernel_asize = ABSOLUTE(_end - _text);
+	_kernel_fsize = ABSOLUTE(_edata - _text);
+	_kernel_vsize = ABSOLUTE(_end - __initdata_begin);
+	_kernel_rsize = ABSOLUTE(_edata - __initdata_begin);
 #endif
 
 	.gptab.sdata : {

drivers/firmware/efi/libstub/loongarch.c

@@ -41,7 +41,7 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
 unsigned long __weak kernel_entry_address(unsigned long kernel_addr,
 		efi_loaded_image_t *image)
 {
-	return *(unsigned long *)(kernel_addr + 8) - VMLINUX_LOAD_ADDRESS + kernel_addr;
+	return *(unsigned long *)(kernel_addr + 8) - PHYSADDR(VMLINUX_LOAD_ADDRESS) + kernel_addr;
 }
 
 efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image,