Commit f0c3a2ca authored by Carl Lundqvist's avatar Carl Lundqvist Committed by Mauro Carvalho Chehab

V4L/DVB (5221): Dvb-usb: initial support for MSI Mega Sky 580 DVB-T based on GL861

This patch adds support for MSI Mega Sky 580 / GL861 DVB-T USB2.0
Except for the 2 lines added to zl10353.c, zl10353_reset_attach needs
to be changed. If I read the code correctly setting parallel_ts will
take care of the 3rd byte, but the 2nd byte needs to be 0x0b instead
of 0x03 too. I guess these changes needs to be done only for this
device, not sure how to do that.
The zl10353 changes have been split apart from this patch, into the next
patch, soon to follow.
Signed-off-by: default avatarCarl Lundqvist <comabug@gmail.com>
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 6345f0f6
......@@ -120,6 +120,14 @@ config DVB_USB_M920X
"DTV USB MINI" (in cold state) are supported.
Firmware required.
config DVB_USB_GL861
tristate "Genesys Logic GL861 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353
help
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
receiver with USB ID 0db0:5581.
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
......
......@@ -33,6 +33,9 @@ obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o
dvb-usb-m920x-objs = m920x.o
obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o
dvb-usb-gl861-objs = gl861.o
obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o
dvb-usb-digitv-objs = digitv.o
obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o
......
......@@ -121,6 +121,7 @@
#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55
#define USB_PID_MEDION_MD95700 0x0932
#define USB_PID_MSI_MEGASKY580 0x5580
#define USB_PID_MSI_MEGASKY55801 0x5581
#define USB_PID_KYE_DVB_T_COLD 0x701e
#define USB_PID_KYE_DVB_T_WARM 0x701f
#define USB_PID_PCTV_200E 0x020e
......
/* DVB USB compliant linux driver for GL861 USB2.0 devices.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "gl861.h"
#include "zl10353.h"
#include "qt1010.h"
/* debug */
int dvb_usb_gl861_debug;
module_param_named(debug,dvb_usb_gl861_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u16 index;
u16 value = addr << 8;
int wo = (rbuf == NULL || rlen == 0); /* write-only */
u8 req, type;
if (wo) {
req = GL861_REQ_I2C_WRITE;
type = GL861_WRITE;
} else { /* rw */
req = GL861_REQ_I2C_READ;
type = GL861_READ;
}
switch (wlen) {
case 1:
index = wbuf[0];
break;
case 2:
index = wbuf[0];
value = value + wbuf[1];
break;
default:
warn("wlen = %x, aborting.", wlen);
return -EINVAL;
}
return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
value, index, rbuf, rlen, 2000);
}
/* I2C */
static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (num > 2)
return -EINVAL;
for (i = 0; i < num; i++) {
/* write/read request */
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
break;
i++;
} else
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
msg[i].len, NULL, 0) < 0)
break;
}
mutex_unlock(&d->i2c_mutex);
return i;
}
static u32 gl861_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm gl861_i2c_algo = {
.master_xfer = gl861_i2c_xfer,
.functionality = gl861_i2c_func,
};
/* Callbacks for DVB USB */
static int gl861_identify_state(struct usb_device *udev,
struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc,
int *cold)
{
*cold = 0;
return 0;
}
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x1e,
.no_tuner = 1,
/*
.parallel_ts = 1,
*/
};
static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
{
if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
&adap->dev->i2c_adap)) != NULL) {
return 0;
}
return -EIO;
}
static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
{
adap->pll_addr = 0xc4;
adap->pll_desc = NULL;
adap->fe->ops.tuner_ops.set_params = qt1010_set_params;
return 0;
}
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties gl861_properties;
static int gl861_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
struct usb_host_interface *alt;
int ret;
if (intf->num_altsetting < 2)
return -ENODEV;
if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE,
&d)) == 0) {
alt = usb_altnum_to_altsetting(intf, 0);
if (alt == NULL) {
deb_rc("not alt found!\n");
return -ENODEV;
}
ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
}
return ret;
}
static struct usb_device_id gl861_table [] = {
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY55801) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, gl861_table);
static struct dvb_usb_device_properties gl861_properties = {
.usb_ctrl = DEVICE_SPECIFIC,
.size_of_priv = 0,
.identify_state = gl861_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.frontend_attach = gl861_frontend_attach,
.tuner_attach = gl861_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}},
.i2c_algo = &gl861_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 1,
.devices = {
{ "MSI Mega Sky 55801 DVB-T USB2.0",
{ &gl861_table[0], NULL },
{ NULL },
},
{ NULL },
}
};
static struct usb_driver gl861_driver = {
.name = "gl861",
.probe = gl861_probe,
.disconnect = dvb_usb_device_exit,
.id_table = gl861_table,
};
/* module stuff */
static int __init gl861_module_init(void)
{
int ret;
if ((ret = usb_register(&gl861_driver))) {
err("usb_register failed. Error number %d", ret);
return ret;
}
return 0;
}
static void __exit gl861_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&gl861_driver);
}
module_init (gl861_module_init);
module_exit (gl861_module_exit);
MODULE_AUTHOR("comabug@gmail.com");
MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
#ifndef _DVB_USB_GL861_H_
#define _DVB_USB_GL861_H_
#define DVB_USB_LOG_PREFIX "gl861"
#include "dvb-usb.h"
extern int dvb_usb_gl861_debug;
#define deb_rc(args...) dprintk(dvb_usb_gl861_debug,0x01,args)
#define GL861_WRITE 0x40
#define GL861_READ 0xc0
#define GL861_REQ_I2C_WRITE 0x01
#define GL861_REQ_I2C_READ 0x02
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment