Commit f11b7f85 authored by Jeff Kirsher's avatar Jeff Kirsher Committed by Jeff Garzik

[PATCH] e1000: Fix flow control water marks

Fixed flow control water marks based on PBA size.
Store flow control state in original_fc in addition to fc.
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 4d351858
......@@ -504,10 +504,8 @@ e1000_down(struct e1000_adapter *adapter)
void
e1000_reset(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
uint32_t pba, manc;
uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
......@@ -531,15 +529,8 @@ e1000_reset(struct e1000_adapter *adapter)
}
if((adapter->hw.mac_type != e1000_82573) &&
(adapter->netdev->mtu > E1000_RXBUFFER_8192)) {
(adapter->netdev->mtu > E1000_RXBUFFER_8192))
pba -= 8; /* allocate more FIFO for Tx */
/* send an XOFF when there is enough space in the
* Rx FIFO to hold one extra full size Rx packet
*/
fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
ETHERNET_FCS_SIZE + 1;
fc_low_water_mark = fc_high_water_mark + 8;
}
if(adapter->hw.mac_type == e1000_82547) {
......@@ -553,10 +544,12 @@ e1000_reset(struct e1000_adapter *adapter)
E1000_WRITE_REG(&adapter->hw, PBA, pba);
/* flow control settings */
adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
fc_high_water_mark;
adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
fc_low_water_mark;
/* Set the FC high water mark to 90% of the FIFO size.
* Required to clear last 3 LSB */
fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
adapter->hw.fc_high_water = fc_high_water_mark;
adapter->hw.fc_low_water = fc_high_water_mark - 8;
adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
adapter->hw.fc_send_xon = 1;
adapter->hw.fc = adapter->hw.original_fc;
......
......@@ -388,7 +388,7 @@ e1000_check_options(struct e1000_adapter *adapter)
e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc;
} else {
adapter->hw.fc = opt.def;
adapter->hw.fc = adapter->hw.original_fc = opt.def;
}
}
{ /* Transmit Interrupt Delay */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment