Commit f12a15be authored by John Stultz's avatar John Stultz Committed by Thomas Gleixner

x86: Convert common clocksources to use clocksource_register_hz/khz

This converts the most common of the x86 clocksources over to use
clocksource_register_hz/khz.
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-11-git-send-email-johnstul@us.ibm.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 0fb86b06
......@@ -16,7 +16,6 @@
#include <asm/hpet.h>
#define HPET_MASK CLOCKSOURCE_MASK(32)
#define HPET_SHIFT 22
/* FSEC = 10^-15
NSEC = 10^-9 */
......@@ -787,7 +786,6 @@ static struct clocksource clocksource_hpet = {
.rating = 250,
.read = read_hpet,
.mask = HPET_MASK,
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = hpet_resume_counter,
#ifdef CONFIG_X86_64
......@@ -798,6 +796,7 @@ static struct clocksource clocksource_hpet = {
static int hpet_clocksource_register(void)
{
u64 start, now;
u64 hpet_freq;
cycle_t t1;
/* Start the counter */
......@@ -832,9 +831,15 @@ static int hpet_clocksource_register(void)
* mult = (hpet_period * 2^shift)/10^6
* mult = (hpet_period << shift)/FSEC_PER_NSEC
*/
clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
clocksource_register(&clocksource_hpet);
/* Need to convert hpet_period (fsec/cyc) to cyc/sec:
*
* cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
* cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
*/
hpet_freq = FSEC_PER_NSEC * NSEC_PER_SEC;
do_div(hpet_freq, hpet_period);
clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
return 0;
}
......
......@@ -751,7 +751,6 @@ static struct clocksource clocksource_tsc = {
.read = read_tsc,
.resume = resume_tsc,
.mask = CLOCKSOURCE_MASK(64),
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_MUST_VERIFY,
#ifdef CONFIG_X86_64
......@@ -845,8 +844,6 @@ __cpuinit int unsynchronized_tsc(void)
static void __init init_tsc_clocksource(void)
{
clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
clocksource_tsc.shift);
if (tsc_clocksource_reliable)
clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
/* lower the rating if we already know its unstable: */
......@@ -854,7 +851,7 @@ static void __init init_tsc_clocksource(void)
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
clocksource_register(&clocksource_tsc);
clocksource_register_khz(&clocksource_tsc, tsc_khz);
}
#ifdef CONFIG_X86_64
......
......@@ -68,10 +68,7 @@ static struct clocksource clocksource_acpi_pm = {
.rating = 200,
.read = acpi_pm_read,
.mask = (cycle_t)ACPI_PM_MASK,
.mult = 0, /*to be calculated*/
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
......@@ -190,9 +187,6 @@ static int __init init_acpi_pm_clocksource(void)
if (!pmtmr_ioport)
return -ENODEV;
clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC,
clocksource_acpi_pm.shift);
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
udelay(100 * j);
......@@ -220,7 +214,8 @@ static int __init init_acpi_pm_clocksource(void)
if (verify_pmtmr_rate() != 0)
return -ENODEV;
return clocksource_register(&clocksource_acpi_pm);
return clocksource_register_hz(&clocksource_acpi_pm,
PMTMR_TICKS_PER_SEC);
}
/* We use fs_initcall because we want the PCI fixups to have run
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment