Commit f131a03d authored by Marc Kleine-Budde's avatar Marc Kleine-Budde

Merge patch series "Add support for Allwinner D1 CAN controllers"

John Watts <contact@jookia.org> says:

This patch series adds support for the Allwinner D1 CAN controllers.
It requires adding a new device tree compatible and driver support to
work around some hardware quirks.

This has been tested on the Mango Pi MQ Dual running a T113 and a
Lichee Panel 86 running a D1.

Changes in v2:
- Re-ordered patches to work with bisecting
- Fixed device tree label underscores
- Fixed email headers
- Link to v1: https://lore.kernel.org/all/20230715112523.2533742-1-contact@jookia.org

Link: https://lore.kernel.org/all/20230721221552.1973203-2-contact@jookia.orgSigned-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parents 74dedbd7 8abb9525
......@@ -21,6 +21,7 @@ properties:
- const: allwinner,sun4i-a10-can
- const: allwinner,sun4i-a10-can
- const: allwinner,sun8i-r40-can
- const: allwinner,sun20i-d1-can
reg:
maxItems: 1
......@@ -37,8 +38,9 @@ properties:
if:
properties:
compatible:
contains:
const: allwinner,sun8i-r40-can
enum:
- allwinner,sun8i-r40-can
- allwinner,sun20i-d1-can
then:
required:
......
......@@ -131,6 +131,18 @@ uart3_pb_pins: uart3-pb-pins {
pins = "PB6", "PB7";
function = "uart3";
};
/omit-if-no-ref/
can0_pins: can0-pins {
pins = "PB2", "PB3";
function = "can0";
};
/omit-if-no-ref/
can1_pins: can1-pins {
pins = "PB4", "PB5";
function = "can1";
};
};
ccu: clock-controller@2001000 {
......@@ -879,5 +891,23 @@ rtc: rtc@7090000 {
clock-names = "bus", "hosc", "ahb";
#clock-cells = <1>;
};
can0: can@2504000 {
compatible = "allwinner,sun20i-d1-can";
reg = <0x02504000 0x400>;
interrupts = <SOC_PERIPHERAL_IRQ(21) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CAN0>;
resets = <&ccu RST_BUS_CAN0>;
status = "disabled";
};
can1: can@2504400 {
compatible = "allwinner,sun20i-d1-can";
reg = <0x02504400 0x400>;
interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CAN1>;
resets = <&ccu RST_BUS_CAN1>;
status = "disabled";
};
};
};
......@@ -190,10 +190,10 @@ config CAN_SLCAN
config CAN_SUN4I
tristate "Allwinner A10 CAN controller"
depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST
help
Say Y here if you want to use CAN controller found on Allwinner
A10/A20 SoCs.
A10/A20/D1 SoCs.
To compile this driver as a module, choose M here: the module will
be called sun4i_can.
......
......@@ -91,6 +91,8 @@
#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
#define SUN4I_REG_ACPC_ADDR_D1 0x0028 /* CAN Acceptance Code 0 on the D1 */
#define SUN4I_REG_ACPM_ADDR_D1 0x002C /* CAN Acceptance Mask 0 on the D1 */
#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
......@@ -205,9 +207,11 @@
* struct sun4ican_quirks - Differences between SoC variants.
*
* @has_reset: SoC needs reset deasserted.
* @acp_offset: Offset of ACPC and ACPM registers
*/
struct sun4ican_quirks {
bool has_reset;
int acp_offset;
};
struct sun4ican_priv {
......@@ -216,6 +220,7 @@ struct sun4ican_priv {
struct clk *clk;
struct reset_control *reset;
spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
int acp_offset;
};
static const struct can_bittiming_const sun4ican_bittiming_const = {
......@@ -338,8 +343,8 @@ static int sun4i_can_start(struct net_device *dev)
}
/* set filters - we accept all */
writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR + priv->acp_offset);
writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR + priv->acp_offset);
/* clear error counters and error code capture */
writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
......@@ -768,10 +773,17 @@ static const struct ethtool_ops sun4ican_ethtool_ops = {
static const struct sun4ican_quirks sun4ican_quirks_a10 = {
.has_reset = false,
.acp_offset = 0,
};
static const struct sun4ican_quirks sun4ican_quirks_r40 = {
.has_reset = true,
.acp_offset = 0,
};
static const struct sun4ican_quirks sun4ican_quirks_d1 = {
.has_reset = true,
.acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR),
};
static const struct of_device_id sun4ican_of_match[] = {
......@@ -784,6 +796,9 @@ static const struct of_device_id sun4ican_of_match[] = {
}, {
.compatible = "allwinner,sun8i-r40-can",
.data = &sun4ican_quirks_r40
}, {
.compatible = "allwinner,sun20i-d1-can",
.data = &sun4ican_quirks_d1
}, {
/* sentinel */
},
......@@ -870,6 +885,7 @@ static int sun4ican_probe(struct platform_device *pdev)
priv->base = addr;
priv->clk = clk;
priv->reset = reset;
priv->acp_offset = quirks->acp_offset;
spin_lock_init(&priv->cmdreg_lock);
platform_set_drvdata(pdev, dev);
......@@ -907,4 +923,4 @@ module_platform_driver(sun4i_can_driver);
MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");
MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment