IB/mlx5: Add support for active_width and active_speed in RoCE

Add missing calculation and translation of active_width and
active_speed for RoCE.

Fixes: 3f89a643 ('IB/mlx5: Extend query_device/port to ...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/mlx5/main.c

@@ -166,17 +166,82 @@ static struct net_device *mlx5_ib_get_netdev(struct ib_device *device,
 	return ndev;
 }
 
+static int translate_eth_proto_oper(u32 eth_proto_oper, u8 *active_speed,
+				    u8 *active_width)
+{
+	switch (eth_proto_oper) {
+	case MLX5E_PROT_MASK(MLX5E_1000BASE_CX_SGMII):
+	case MLX5E_PROT_MASK(MLX5E_1000BASE_KX):
+	case MLX5E_PROT_MASK(MLX5E_100BASE_TX):
+	case MLX5E_PROT_MASK(MLX5E_1000BASE_T):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_SDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_T):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_CX4):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_KX4):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_KR):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_CR):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_SR):
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_ER):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_QDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_25GBASE_CR):
+	case MLX5E_PROT_MASK(MLX5E_25GBASE_KR):
+	case MLX5E_PROT_MASK(MLX5E_25GBASE_SR):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_EDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_40GBASE_CR4):
+	case MLX5E_PROT_MASK(MLX5E_40GBASE_KR4):
+	case MLX5E_PROT_MASK(MLX5E_40GBASE_SR4):
+	case MLX5E_PROT_MASK(MLX5E_40GBASE_LR4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_QDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_50GBASE_CR2):
+	case MLX5E_PROT_MASK(MLX5E_50GBASE_KR2):
+	case MLX5E_PROT_MASK(MLX5E_50GBASE_SR2):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_HDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_56GBASE_R4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_FDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_100GBASE_CR4):
+	case MLX5E_PROT_MASK(MLX5E_100GBASE_SR4):
+	case MLX5E_PROT_MASK(MLX5E_100GBASE_KR4):
+	case MLX5E_PROT_MASK(MLX5E_100GBASE_LR4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_EDR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void mlx5_query_port_roce(struct ib_device *device, u8 port_num,
 				 struct ib_port_attr *props)
 {
 	struct mlx5_ib_dev *dev = to_mdev(device);
+	struct mlx5_core_dev *mdev = dev->mdev;
 	struct net_device *ndev, *upper;
 	enum ib_mtu ndev_ib_mtu;
 	u16 qkey_viol_cntr;
+	u32 eth_prot_oper;
 
-	/* Getting netdev before filling out props so in case of an error it
-	 * will still be zeroed out.
+	/* Possible bad flows are checked before filling out props so in case
+	 * of an error it will still be zeroed out.
 	 */
+	if (mlx5_query_port_eth_proto_oper(mdev, &eth_prot_oper, port_num))
+		return;
+
+	translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
+				 &props->active_width);
 
 	props->port_cap_flags  |= IB_PORT_CM_SUP;
 	props->port_cap_flags  |= IB_PORT_IP_BASED_GIDS;
@@ -217,9 +282,6 @@ static void mlx5_query_port_roce(struct ib_device *device, u8 port_num,
 	dev_put(ndev);
 
 	props->active_mtu	= min(props->max_mtu, ndev_ib_mtu);
-
-	props->active_width	= IB_WIDTH_4X;  /* TODO */
-	props->active_speed	= IB_SPEED_QDR; /* TODO */
 }
 
 static void ib_gid_to_mlx5_roce_addr(const union ib_gid *gid,