Commit f1b99aa9 authored by Jonathan Corbet's avatar Jonathan Corbet

viafb: Unify duplicated set_bpp() code

As suggested by Florian: make both mode-setting paths use the same code.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
parent 9ca43cf4
......@@ -20,12 +20,42 @@
*/
#include "global.h"
/*
* Figure out an appropriate bytes-per-pixel setting.
*/
static int viafb_set_bpp(void __iomem *engine, u8 bpp)
{
u32 gemode;
/* Preserve the reserved bits */
/* Lowest 2 bits to zero gives us no rotation */
gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
switch (bpp) {
case 8:
gemode |= VIA_GEM_8bpp;
break;
case 16:
gemode |= VIA_GEM_16bpp;
break;
case 32:
gemode |= VIA_GEM_32bpp;
break;
default:
printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
return -EINVAL;
}
writel(gemode, engine + VIA_REG_GEMODE);
return 0;
}
static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
u32 fg_color, u32 bg_color, u8 fill_rop)
{
u32 ge_cmd = 0, tmp, i;
int ret;
if (!op || op > 3) {
printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
......@@ -59,22 +89,9 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
}
}
switch (dst_bpp) {
case 8:
tmp = 0x00000000;
break;
case 16:
tmp = 0x00000100;
break;
case 32:
tmp = 0x00000300;
break;
default:
printk(KERN_WARNING "hw_bitblt_1: Unsupported bpp %d\n",
dst_bpp);
return -EINVAL;
}
writel(tmp, engine + 0x04);
ret = viafb_set_bpp(engine, dst_bpp);
if (ret)
return ret;
if (op != VIA_BITBLT_FILL) {
if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
......@@ -165,35 +182,6 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
return 0;
}
/*
* Figure out an appropriate bytes-per-pixel setting.
*/
static int viafb_set_bpp(void __iomem *engine, u8 bpp)
{
u32 gemode;
/* Preserve the reserved bits */
/* Lowest 2 bits to zero gives us no rotation */
gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
switch (bpp) {
case 8:
gemode |= VIA_GEM_8bpp;
break;
case 16:
gemode |= VIA_GEM_16bpp;
break;
case 32:
gemode |= VIA_GEM_32bpp;
break;
default:
printk(KERN_WARNING "hw_bitblt_2: Unsupported bpp %d\n", bpp);
return -EINVAL;
}
writel(gemode, engine + VIA_REG_GEMODE);
return 0;
}
static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment