Merge tag 'omap-for-v3.10/fixes-v3.10-rc4' of...

Merge tag 'omap-for-v3.10/fixes-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren, a set of small fixes for omaps for the -rc cycle:

- am7303 iva2 reset PM regression fix
- am33xx uart2 dma channel fix
- am33xx gpmc properties fix
- omap44xx rtc wake-up mux fix for nirq pins
- omap36xx clock divider restore fix

There's also one tiny non-critical .dts fix for omap5
timer pwm properties.

* tag 'omap-for-v3.10/fixes-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap3: clock: fix wrong container_of in clock36xx.c
  ARM: dts: OMAP5: Fix missing PWM capability to timer nodes
  ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line
  ARM: dts: AM33xx: Fix properties on gpmc node
  arm: omap2: fix AM33xx hwmod infos for UART2
  ARM: OMAP3: Fix iva2_pwrdm settings for 3703

arch/arm/boot/dts/am33xx.dtsi

@@ -409,8 +409,8 @@ gpmc: gpmc@50000000 {
 			ti,hwmods = "gpmc";
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			num-cs = <7>;
-			num-waitpins = <2>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			status = "disabled";

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -56,9 +56,23 @@ sound: sound {
 	};
 };
 
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6030_wkup_pins
+	>;
+
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+		>;
+	};
+};
+
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
+			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
@@ -66,6 +80,12 @@ &dss_hdmi_pins
 			&tpd12s015_pins
 	>;
 
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+		>;
+	};
+
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */

arch/arm/boot/dts/omap4-sdp.dts

@@ -142,9 +142,23 @@ sound {
 	};
 };
 
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6030_wkup_pins
+	>;
+
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+		>;
+	};
+};
+
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
+			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&dmic_pins
@@ -179,6 +193,12 @@ uart4_pins: pinmux_uart4_pins {
 		>;
 	};
 
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+		>;
+	};
+
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */

arch/arm/boot/dts/omap5.dtsi

@@ -538,6 +538,7 @@ timer5: timer@40138000 {
 			interrupts = <0 41 0x4>;
 			ti,hwmods = "timer5";
 			ti,timer-dsp;
+			ti,timer-pwm;
 		};
 
 		timer6: timer@4013a000 {
@@ -574,6 +575,7 @@ timer9: timer@4803e000 {
 			reg = <0x4803e000 0x80>;
 			interrupts = <0 45 0x4>;
 			ti,hwmods = "timer9";
+			ti,timer-pwm;
 		};
 
 		timer10: timer@48086000 {
@@ -581,6 +583,7 @@ timer10: timer@48086000 {
 			reg = <0x48086000 0x80>;
 			interrupts = <0 46 0x4>;
 			ti,hwmods = "timer10";
+			ti,timer-pwm;
 		};
 
 		timer11: timer@48088000 {

arch/arm/mach-omap2/clock36xx.c

@@ -20,11 +20,12 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 
 #include "clock.h"
 #include "clock36xx.h"
-
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
 /**
  * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
@@ -39,29 +40,28 @@
  */
 int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 {
-	struct clk_hw_omap *parent;
+	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
-	u32 dummy_v, orig_v, clksel_shift;
+	u32 dummy_v, orig_v;
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
 	ret = omap2_dflt_clk_enable(clk);
 
 	parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
-	parent = to_clk_hw_omap(parent_hw);
+	parent = to_clk_divider(parent_hw);
 
 	/* Restore the dividers */
 	if (!ret) {
-		clksel_shift = __ffs(parent->clksel_mask);
-		orig_v = __raw_readl(parent->clksel_reg);
+		orig_v = __raw_readl(parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << clksel_shift);
-		__raw_writel(dummy_v, parent->clksel_reg);
+		dummy_v ^= (1 << parent->shift);
+		__raw_writel(dummy_v, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->clksel_reg);
+		__raw_writel(orig_v, parent->reg);
 	}
 
 	return ret;

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	},
 };
 
+/* uart2 */
+static struct omap_hwmod_dma_info uart2_edma_reqs[] = {
+	{ .name = "tx",	.dma_req = 28, },
+	{ .name = "rx",	.dma_req = 29, },
+	{ .dma_req = -1 }
+};
+
 static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
 	{ .irq = 73 + OMAP_INTC_START, },
 	{ .irq = -1 },
@@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
 	.clkdm_name	= "l4ls_clkdm",
 	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart2_irqs,
-	.sdma_reqs	= uart1_edma_reqs,
+	.sdma_reqs	= uart2_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
 	.prcm		= {
 		.omap4	= {

arch/arm/mach-omap2/pm34xx.c

@@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	if (omap3_has_iva())
-		omap3_iva_idle();
+	/*
+	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
+	 */
+	omap3_iva_idle();
 
 	omap3_d2d_idle();
 }