Skip to content

L
linux
Commit f1ec83f8 authored by David Bauer's avatar David Bauer Committed by Heiko Stuebner
Browse files
Options

arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S 

This adds support for the NanoPi R2S from FriendlyARM.

Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (LAN)
USB 2.0 Host Port
MicroSD slot
Reset button
WAN - LAN - SYS LED
Signed-off-by: default avatarDavid Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20200920154528.88185-2-mail@david-bauer.net
[adapted from sdmmc0m1_gpio to renamed sdmmc0m1_pin]
Reported-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 8cfcf327
Hide whitespace changes
Inline Side-by-side
Showing with 369 additions and 0 deletions
arch/arm64/boot/dts/rockchip/Makefile
View file @ f1ec83f8
......@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
......
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts 0 → 100644
View file @ f1ec83f8
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 David Bauer <mail@david-bauer.net>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "rk3328.dtsi"
/ {
model = "FriendlyElec NanoPi R2S";
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
chosen {
stdout-path = "serial2:1500000n8";
};
gmac_clk: gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_clk";
#clock-cells = <0>;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <50>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
pinctrl-names = "default";
lan_led: led-0 {
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
label = "nanopi-r2s:green:lan";
};
sys_led: led-1 {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "nanopi-r2s:red:sys";
};
wan_led: led-2 {
gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
label = "nanopi-r2s:green:wan";
};
};
vcc_io_sdio: sdmmcio-regulator {
compatible = "regulator-gpio";
enable-active-high;
gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sdio_vcc_pin>;
pinctrl-names = "default";
regulator-name = "vcc_io_sdio";
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-settling-time-us = <5000>;
regulator-type = "voltage";
startup-delay-us = <2000>;
states = <1800000 0x1
3300000 0x0>;
vin-supply = <&vcc_io_33>;
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc0m1_pin>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_io_33>;
};
vdd_5v: vdd-5v {
compatible = "regulator-fixed";
regulator-name = "vdd_5v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&gmac2io {
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
clock_in_out = "input";
phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
phy-supply = <&vcc_io_33>;
pinctrl-0 = <&rgmiim1_pins>;
pinctrl-names = "default";
rx_delay = <0x18>;
snps,aal;
tx_delay = <0x24>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
rtl8211e: ethernet-phy@1 {
reg = <1>;
pinctrl-0 = <&eth_phy_reset_pin>;
pinctrl-names = "default";
reset-assert-us = <10000>;
reset-deassert-us = <50000>;
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
};
};
};
&i2c1 {
status = "okay";
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio1>;
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
gpio-controller;
#gpio-cells = <2>;
pinctrl-0 = <&pmic_int_l>;
pinctrl-names = "default";
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vdd_5v>;
vcc2-supply = <&vdd_5v>;
vcc3-supply = <&vdd_5v>;
vcc4-supply = <&vdd_5v>;
vcc5-supply = <&vcc_io_33>;
vcc6-supply = <&vdd_5v>;
regulators {
vdd_log: DCDC_REG1 {
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1450000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1450000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io_33: DCDC_REG4 {
regulator-name = "vcc_io_33";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_18: LDO_REG1 {
regulator-name = "vcc_18";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc18_emmc: LDO_REG2 {
regulator-name = "vcc18_emmc";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_10: LDO_REG3 {
regulator-name = "vdd_10";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
};
};
};
&io_domains {
pmuio-supply = <&vcc_io_33>;
vccio1-supply = <&vcc_io_33>;
vccio2-supply = <&vcc18_emmc>;
vccio3-supply = <&vcc_io_sdio>;
vccio4-supply = <&vcc_18>;
vccio5-supply = <&vcc_io_33>;
vccio6-supply = <&vcc_io_33>;
status = "okay";
};
&pinctrl {
button {
reset_button_pin: reset-button-pin {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ethernet-phy {
eth_phy_reset_pin: eth-phy-reset-pin {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
leds {
lan_led_pin: lan-led-pin {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
wan_led_pin: wan-led-pin {
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sd {
sdio_vcc_pin: sdio-vcc-pin {
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm2 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
disable-wp;
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
pinctrl-names = "default";
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vcc_io_sdio>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&u2phy {
status = "okay";
};
&u2phy_host {
status = "okay";
};
&u2phy_otg {
status = "okay";
};
&uart2 {
status = "okay";
};
&usb20_otg {
status = "okay";
dr_mode = "host";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7