Commit f1f028ff authored by H. Nikolaus Schaller's avatar H. Nikolaus Schaller Committed by Tony Lindgren

DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again

commit 6953c57a "gpio: of: Handle SPI chipselect legacy bindings"

did introduce logic to centrally handle the legacy spi-cs-high property
in combination with cs-gpios. This assumes that the polarity
of the CS has to be inverted if spi-cs-high is missing, even
and especially if non-legacy GPIO_ACTIVE_HIGH is specified.

The DTS for the GTA04 was orginally introduced under the assumption
that there is no need for spi-cs-high if the gpio is defined with
proper polarity GPIO_ACTIVE_HIGH.

This was not a problem until gpiolib changed the interpretation of
GPIO_ACTIVE_HIGH and missing spi-cs-high.

The effect is that the missing spi-cs-high is now interpreted as CS being
low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the
panel is to be programmed by the panel driver.

Therefore, we have to add the redundant and legacy spi-cs-high property
to properly activate CS.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 2d3c8ba3
......@@ -120,6 +120,7 @@ lcd: td028ttec1@0 {
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
spi-cs-high;
backlight= <&backlight>;
label = "lcd";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment