Complete the upgrade to aic7xxx 6.2.23 and aic79xx 1.3.0_ALPHA3.

drivers/scsi/Kconfig

@@ -277,7 +277,50 @@ config SCSI_AACRAID
 	tristate "Adaptec AACRAID support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && SCSI && PCI
 
-source "drivers/scsi/aic7xxx/Kconfig"
+source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
+
+config SCSI_AIC7XXX_OLD
+	tristate "Adaptec AIC7xxx support (old driver)"
+	help
+	  WARNING This driver is an older aic7xxx driver and is no longer
+	  under active development.  Adaptec, Inc. is writing a new driver to
+	  take the place of this one, and it is recommended that whenever
+	  possible, people should use the new Adaptec written driver instead
+	  of this one.  This driver will eventually be phased out entirely.
+
+	  This is support for the various aic7xxx based Adaptec SCSI
+	  controllers. These include the 274x EISA cards; 284x VLB cards;
+	  2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+	  motherboard based SCSI controllers from Adaptec. It does not support
+	  the AAA-13x RAID controllers from Adaptec, nor will it likely ever
+	  support them. It does not support the 2920 cards from Adaptec that
+	  use the Future Domain SCSI controller chip. For those cards, you
+	  need the "Future Domain 16xx SCSI support" driver.
+
+	  In general, if the controller is based on an Adaptec SCSI controller
+	  chip from the aic777x series or the aic78xx series, this driver
+	  should work. The only exception is the 7810 which is specifically
+	  not supported (that's the RAID controller chip on the AAA-13x
+	  cards).
+
+	  Note that the AHA2920 SCSI host adapter is *not* supported by this
+	  driver; choose "Future Domain 16xx SCSI support" instead if you have
+	  one of those.
+
+	  Information on the configuration options for this controller can be
+	  found by checking the help file for each of the available
+	  configuration options. You should read
+	  <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
+	  contacting the maintainer with any questions.  The SCSI-HOWTO,
+	  available from <http://www.linuxdoc.org/docs.html#howto>, can also
+	  be of great help.
+
+	  If you want to compile this driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called aic7xxx_old.o.
+
+source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 
 # All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O

drivers/scsi/aic7xxx/Kconfig.aic79xx

 #
 # AIC79XX 2.5.X Kernel configuration File.
-# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Kconfig.aic79xx#1 $
+# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Kconfig.aic79xx#2 $
 #
 config SCSI_AIC79XX
 	tristate "Adaptec AIC79xx U320 support"
+	depends on PCI
 	help
 	This driver supports all of Adaptec's Ultra 320 PCI-X
 	based SCSI controllers.

drivers/scsi/aic7xxx/Kconfig.aic7xxx

 #
 # AIC7XXX and AIC79XX 2.5.X Kernel configuration File.
-# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Kconfig.aic7xxx#2 $
+# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Kconfig.aic7xxx#4 $
 #
 config SCSI_AIC7XXX
-	tristate "Adaptec AIC7xxx Fast -> U160 support"
+	tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)"
 	---help---
 	This driver supports all of Adaptec's Fast through Ultra 160 PCI
 	based SCSI controllers as well as the aic7770 based EISA and VLB
@@ -98,9 +98,3 @@ config AIC7XXX_REG_PRETTY_PRINT
 	contents in diagnostics.  This make it much easier to understand debug
 	output without having to refer to a data book and/or the aic7xxx.reg
 	file.
-
-config SCSI_AIC79XX
-	tristate "Adaptec AIC79xx U320 support"
-	help
-	This driver supports all of Adaptec's Ultra 320 PCI-X
-	based SCSI controllers.

drivers/scsi/aic7xxx/Makefile

 #
 # Makefile for the Linux aic7xxx SCSI driver.
 #
-# Let kbuild descend into aicasm when cleaning
-#
-# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Makefile#1 $
+# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Makefile#2 $
 #
+
+# Let kbuild descend into aicasm when cleaning
 subdir-				+= aicasm
 
 obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx.o
-ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_SCSI_AIC79XX)	+= aic79xx.o
-endif
 
-# Core files
-aic7xxx-objs	+= aic7xxx_core.o aic7xxx_93cx6.o aic7770.o
+# Core Fast -> U160 files
+aic7xxx-y					+= aic7xxx_core.o	\
+						   aic7xxx_93cx6.o	\
+						   aic7770.o
+aic7xxx-$(CONFIG_PCI)				+= aic7xxx_pci.o
+aic7xxx-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT)	+= aic7xxx_reg_print.o
 
-# Platform Specific Files
-aic7xxx-objs	+= aic7xxx_osm.o aic7xxx_proc.o aic7770_osm.o
-ifeq ($(CONFIG_AIC7XXX_REG_PRETTY_PRINT),y)
-aic7xxx-objs	+=  aic7xxx_reg_print.o
-endif
+# Platform Specific Fast -> U160 Files
+aic7xxx-y					+= aic7xxx_osm.o	\
+						   aic7xxx_proc.o	\
+						   aic7770_osm.o
+aic7xxx-$(CONFIG_PCI)				+= aic7xxx_osm_pci.o
 
-# PCI Specific Files
-ifeq ($(CONFIG_PCI),y)
-  # Core PCI files
-  aic7xxx-objs	+= aic7xxx_pci.o
-  # Platform Specific PCI Files
-  aic7xxx-objs	+= aic7xxx_osm_pci.o
-endif
+# Core U320 files
+aic79xx-y					+= aic79xx_core.o	\
+						   aic79xx_pci.o
+aic79xx-$(CONFIG_AIC79XX_REG_PRETTY_PRINT)	+= aic79xx_reg_print.o
 
 # Platform Specific U320 Files
-aic79xx-objs	= aic79xx_osm.o aic79xx_proc.o aic79xx_osm_pci.o
-# Core Files
-aic79xx-objs	+= aic79xx_core.o aic79xx_pci.o
-ifeq ($(CONFIG_AIC79XX_REG_PRETTY_PRINT),y)
-aic79xx-objs	+= aic79xx_reg_print.o
-endif
+aic79xx-y					+= aic79xx_osm.o	\
+						   aic79xx_proc.o	\
+						   aic79xx_osm_pci.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/scsi
 #EXTRA_CFLAGS += -g
 
 # Files generated that shall be removed upon make clean
@@ -49,8 +45,8 @@ clean-files += aic79xx_seq.h aic79xx_reg.h aic79xx_reg_print.c
 $(obj)/aic7xxx_core.o: $(obj)/aic7xxx_seq.h
 $(obj)/aic79xx_core.o: $(obj)/aic79xx_seq.h
 
-$(addprefix $(obj)/,$(aic7xxx-objs)): $(obj)/aic7xxx_reg.h
-$(addprefix $(obj)/,$(aic79xx-objs)): $(obj)/aic79xx_reg.h
+$(addprefix $(obj)/,$(aic7xxx-y)): $(obj)/aic7xxx_reg.h
+$(addprefix $(obj)/,$(aic79xx-y)): $(obj)/aic79xx_reg.h
 
 ifeq ($(CONFIG_AIC7XXX_BUILD_FIRMWARE),y)
 aic7xxx_gen = $(obj)/aic7xxx_seq.h $(obj)/aic7xxx_reg.h

drivers/scsi/aic7xxx/aic79xx_osm.c

 /*
  * Adaptec AIC79xx device driver for Linux.
  *
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#92 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#93 $
  *
  * --------------------------------------------------------------------------
  * Copyright (c) 1994-2000 Justin T. Gibbs.
@@ -801,7 +801,6 @@ static int	   ahd_linux_release(struct Scsi_Host *);
 static const char *ahd_linux_info(struct Scsi_Host *);
 static int	   ahd_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-static int	   ahd_linux_slave_alloc(Scsi_Device *);
 static int	   ahd_linux_slave_configure(Scsi_Device *);
 static void	   ahd_linux_slave_destroy(Scsi_Device *);
 static int	   ahd_linux_biosparam(struct scsi_device*,

drivers/scsi/aic7xxx/aic79xx_osm.h

@@ -36,7 +36,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#88 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#90 $
  *
  */
 #ifndef _AIC79XX_LINUX_H_
@@ -141,7 +141,7 @@ typedef Scsi_Cmnd      *ahd_io_ctx_t;
 /************************* Configuration Data *********************************/
 extern int aic79xx_allow_memio;
 extern int aic79xx_detect_complete;
-extern Scsi_Host_Template* aic79xx_driver_template;
+extern Scsi_Host_Template aic79xx_driver_template;
 
 /***************************** Bus Space/DMA **********************************/
 
@@ -246,10 +246,6 @@ int	ahd_dmamap_unload(struct ahd_softc *, bus_dma_tag_t, bus_dmamap_t);
 typedef struct timer_list ahd_timer_t;
 
 /********************************** Includes **********************************/
-/* Host template and function declarations referenced by the template. */
-#include "aic79xx_host.h"
-
-/* Core driver definitions */
 #if CONFIG_AIC79XX_REG_PRETTY_PRINT
 #define AIC_DEBUG_REGISTERS 1
 #else
@@ -1052,6 +1048,9 @@ ahd_flush_device_writes(struct ahd_softc *ahd)
 #define ahd_pci_set_dma_mask(dev_softc, mask)	\
 	(((dev_softc)->dma_mask = mask) && 0)
 #endif
+/**************************** Proc FS Support *********************************/
+int	ahd_linux_proc_info(char *, char **, off_t, int, int, int);
+
 /*************************** Domain Validation ********************************/
 #define AHD_DV_CMD(cmd) ((cmd)->scsi_done == ahd_linux_dv_complete)
 #define AHD_DV_SIMQ_FROZEN(ahd)					\

drivers/scsi/aic7xxx/aic7xxx_osm.c

 /*
  * Adaptec AIC7xxx device driver for Linux.
  *
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.c#160 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.c#161 $
  *
  * Copyright (c) 1994 John Aycock
  *   The University of Calgary Department of Computer Science.
@@ -812,7 +812,6 @@ static int	   ahc_linux_release(struct Scsi_Host *);
 static int	   ahc_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
 static const char *ahc_linux_info(struct Scsi_Host *);
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-static int	   ahc_linux_slave_alloc(Scsi_Device *);
 static int	   ahc_linux_slave_configure(Scsi_Device *);
 static void	   ahc_linux_slave_destroy(Scsi_Device *);
 static int	   ahd_linux_biosparam(struct scsi_device*,

drivers/scsi/aic7xxx/aic7xxx_osm.h

@@ -18,8 +18,6 @@
  * along with this program; see the file COPYING.  If not, write to
  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  * 
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.h#108 $
- *
  * Copyright (c) 2000-2001 Adaptec Inc.
  * All rights reserved.
  *
@@ -55,7 +53,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.h#108 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.h#109 $
  *
  */
 #ifndef _AIC7XXX_LINUX_H_
@@ -156,7 +154,7 @@ typedef Scsi_Cmnd      *ahc_io_ctx_t;
 extern int aic7xxx_no_probe;
 extern int aic7xxx_allow_memio;
 extern int aic7xxx_detect_complete;
-extern Scsi_Host_Template* aic7xxx_driver_template;
+extern Scsi_Host_Template aic7xxx_driver_template;
 
 /***************************** Bus Space/DMA **********************************/
 
@@ -261,10 +259,6 @@ int	ahc_dmamap_unload(struct ahc_softc *, bus_dma_tag_t, bus_dmamap_t);
 typedef struct timer_list ahc_timer_t;
 
 /********************************** Includes **********************************/
-/* Host template and function declarations referenced by the template. */
-#include "aic7xxx_host.h"
-
-/* Core driver definitions */
 #if CONFIG_AIC7XXX_REG_PRETTY_PRINT
 #define AIC_DEBUG_REGISTERS 1
 #else
@@ -1020,6 +1014,9 @@ ahc_flush_device_writes(struct ahc_softc *ahc)
 #define ahc_pci_set_dma_mask(dev_softc, mask)  			\
 	(((dev_softc)->dma_mask = mask) && 0)
 #endif
+/**************************** Proc FS Support *********************************/
+int	ahc_linux_proc_info(char *, char **, off_t, int, int, int);
+
 /*************************** Domain Validation ********************************/
 #define AHC_DV_CMD(cmd) ((cmd)->scsi_done == ahc_linux_dv_complete)
 #define AHC_DV_SIMQ_FROZEN(ahc)					\

drivers/scsi/aic7xxx/aiclib.h

@@ -825,6 +825,25 @@ typedef enum {
 
 extern const char *scsi_sense_key_text[];
 
+/************************* Large Disk Handling ********************************/
+static __inline int aic_sector_div(u_long capacity, int heads, int sectors);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static __inline int
+aic_sector_div(u_long capacity, int heads, int sectors)
+{
+	return (capacity / (heads * sectors));
+}
+#else
+static __inline int
+aic_sector_div(sector_t capacity, int heads, int sectors)
+{
+	/* ugly, ugly sector_div calling convention.. */
+	sector_div(capacity, (heads * sectors));
+	return (int)capacity;
+}
+#endif
+
 /**************************** Module Library Hack *****************************/
 /*
  * What we'd like to do is have a single "scsi library" module that both the