Merge tag 'v5.11-rockchip-dtsfixes1' of...

Merge tag 'v5.11-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Wrong irq number on px30 and cleanups of stuff on rk3399 regarding
wrongly used dt properties and parts that shouldn't be enabled.

* tag 'v5.11-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Disable display for NanoPi R2S
  arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
  arm64: dts: rockchip: Fix PCIe DT properties on rk3399
  arm64: dts: rockchip: Use only supported PCIe link speed on Pinebook Pro
  arm64: dts: rockchip: fix vopl iommu irq on px30

Link: https://lore.kernel.org/r/5429065.DvuYhMxLoT@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -1097,7 +1097,7 @@ vopl_out_lvds: endpoint@1 {
 	vopl_mmu: iommu@ff470f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff470f00 0x0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
 		clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
 		clock-names = "aclk", "iface";

arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts

@@ -114,6 +114,10 @@ &cpu3 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

@@ -790,7 +790,6 @@ &pcie_phy {
 &pcie0 {
 	bus-scan-delay-ms = <1000>;
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -234,6 +234,7 @@ pcie0: pcie@f8000000 {
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -252,7 +253,6 @@ pcie0: pcie@f8000000 {
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
@@ -1278,7 +1278,6 @@ vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
 		reg = <0x0 0xff660000 0x0 0x400>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
 		clock-names = "axi", "ahb", "cabac", "core";