Commit f3124ccf authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu update from Greg Ungerer:
 "Only a single change to provide platform side support for the eDMA
  hardware module on the ColdFire MCF5441X SoC"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: add ColdFire mcf5441x eDMA platform support
parents d14d7f14 d7e9d01a
......@@ -14,11 +14,14 @@
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/fec.h>
#include <linux/dmaengine.h>
#include <asm/traps.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/dma-mcf-edma.h>
/*
* All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
......@@ -476,6 +479,81 @@ static struct platform_device mcf_i2c5 = {
#endif /* MCFI2C_BASE5 */
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
#if IS_ENABLED(CONFIG_MCF_EDMA)
static const struct dma_slave_map mcf_edma_map[] = {
{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
{ "dreq1", "rx-tx", MCF_EDMA_FILTER_PARAM(1) },
{ "uart.0", "rx", MCF_EDMA_FILTER_PARAM(2) },
{ "uart.0", "tx", MCF_EDMA_FILTER_PARAM(3) },
{ "uart.1", "rx", MCF_EDMA_FILTER_PARAM(4) },
{ "uart.1", "tx", MCF_EDMA_FILTER_PARAM(5) },
{ "uart.2", "rx", MCF_EDMA_FILTER_PARAM(6) },
{ "uart.2", "tx", MCF_EDMA_FILTER_PARAM(7) },
{ "timer0", "rx-tx", MCF_EDMA_FILTER_PARAM(8) },
{ "timer1", "rx-tx", MCF_EDMA_FILTER_PARAM(9) },
{ "timer2", "rx-tx", MCF_EDMA_FILTER_PARAM(10) },
{ "timer3", "rx-tx", MCF_EDMA_FILTER_PARAM(11) },
{ "fsl-dspi.0", "rx", MCF_EDMA_FILTER_PARAM(12) },
{ "fsl-dspi.0", "tx", MCF_EDMA_FILTER_PARAM(13) },
{ "fsl-dspi.1", "rx", MCF_EDMA_FILTER_PARAM(14) },
{ "fsl-dspi.1", "tx", MCF_EDMA_FILTER_PARAM(15) },
};
static struct mcf_edma_platform_data mcf_edma_data = {
.dma_channels = 64,
.slave_map = mcf_edma_map,
.slavecnt = ARRAY_SIZE(mcf_edma_map),
};
static struct resource mcf_edma_resources[] = {
{
.start = MCFEDMA_BASE,
.end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFEDMA_IRQ_INTR0,
.end = MCFEDMA_IRQ_INTR0 + 15,
.flags = IORESOURCE_IRQ,
.name = "edma-tx-00-15",
},
{
.start = MCFEDMA_IRQ_INTR16,
.end = MCFEDMA_IRQ_INTR16 + 39,
.flags = IORESOURCE_IRQ,
.name = "edma-tx-16-55",
},
{
.start = MCFEDMA_IRQ_INTR56,
.end = MCFEDMA_IRQ_INTR56,
.flags = IORESOURCE_IRQ,
.name = "edma-tx-56-63",
},
{
.start = MCFEDMA_IRQ_ERR,
.end = MCFEDMA_IRQ_ERR,
.flags = IORESOURCE_IRQ,
.name = "edma-err",
},
};
static u64 mcf_edma_dmamask = DMA_BIT_MASK(32);
static struct platform_device mcf_edma = {
.name = "mcf-edma",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_edma_resources),
.resource = mcf_edma_resources,
.dev = {
.dma_mask = &mcf_edma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mcf_edma_data,
}
};
#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#if IS_ENABLED(CONFIG_FEC)
......@@ -505,6 +583,9 @@ static struct platform_device *mcf_devices[] __initdata = {
&mcf_i2c5,
#endif
#endif
#if IS_ENABLED(CONFIG_MCF_EDMA)
&mcf_edma,
#endif
};
/*
......
......@@ -137,6 +137,8 @@ struct clk *mcf_clks[] = {
static struct clk * const enable_clks[] __initconst = {
/* make sure these clocks are enabled */
&__clk_0_15, /* dspi.1 */
&__clk_0_17, /* eDMA */
&__clk_0_18, /* intc0 */
&__clk_0_19, /* intc0 */
&__clk_0_20, /* intc0 */
......@@ -157,8 +159,6 @@ static struct clk * const disable_clks[] __initconst = {
&__clk_0_8, /* can.0 */
&__clk_0_9, /* can.1 */
&__clk_0_14, /* i2c.1 */
&__clk_0_15, /* dspi.1 */
&__clk_0_17, /* eDMA */
&__clk_0_22, /* i2c.0 */
&__clk_0_23, /* dspi.0 */
&__clk_0_28, /* tmr.1 */
......
......@@ -282,6 +282,21 @@
* DSPI module.
*/
#define MCFDSPI_BASE0 0xfc05c000
#define MCFDSPI_BASE1 0xfC03c000
#define MCF_IRQ_DSPI0 (MCFINT0_VECBASE + MCFINT0_DSPI0)
#define MCF_IRQ_DSPI1 (MCFINT1_VECBASE + MCFINT1_DSPI1)
/*
* eDMA module.
*/
#define MCFEDMA_BASE 0xfc044000
#define MCFEDMA_SIZE 0x4000
#define MCFINT0_EDMA_INTR0 8
#define MCFINT0_EDMA_ERR 24
#define MCFEDMA_EDMA_INTR16 8
#define MCFEDMA_EDMA_INTR56 0
#define MCFEDMA_IRQ_INTR0 (MCFINT0_VECBASE + MCFINT0_EDMA_INTR0)
#define MCFEDMA_IRQ_INTR16 (MCFINT1_VECBASE + MCFEDMA_EDMA_INTR16)
#define MCFEDMA_IRQ_INTR56 (MCFINT2_VECBASE + MCFEDMA_EDMA_INTR56)
#define MCFEDMA_IRQ_ERR (MCFINT0_VECBASE + MCFINT0_EDMA_ERR)
#endif /* m5441xsim_h */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment