Merge branch 'ethtool-consolidate-parameter-checking-for-irq-coalescing'

Jakub Kicinski says:

====================
ethtool: consolidate parameter checking for irq coalescing

This set aims to simplify and unify the unsupported irq
coalescing parameter handling.

First patch adds a bitmask which drivers should fill in
in their ethtool_ops structs to declare which parameters
they support. Core will then ensure that driver callback
won't see any parameter outside of that set.

This allows us to save some LoC and make sure all drivers
respond the same to unsupported parameters.

If any parameter driver does not support is set to a value
other than 0 core will return -EINVAL. In the future we can
reject any present but unsupported netlink attribute, without
assuming 0 means unset. We can also add some prints or extack,
perhaps a'la Intel's current code.

I started converting the drivers alphabetically but then
realized that for the first set it's probably best to
address a representative mix of actively developed drivers.

According to my unreliable math there are roughly 69 drivers
in the tree which support some form of interrupt coalescing
settings via ethtool. Of these roughly 17 reject parameters
they don't support.

I hope drivers which ignore the parameters don't care, and
won't care about the slight change in behavior. Once all
drivers are converted we can make the checking mandatory.

I've only tested the e1000e and virtio patches, the rest builds.

v2: fix up ice and virtio conversions
v3: (patch 1)
    - move the (temporary) check if driver defines types
      earlier (Michal)
    - rename used_types -> nonzero_params, and
      coalesce_types -> supported_coalesce_params (Alex)
    - use EOPNOTSUPP instead of EINVAL (Andrew, Michal)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c

@@ -450,30 +450,6 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 	unsigned int rx_frames, rx_riwt, rx_usecs;
 	unsigned int tx_frames;
 
-	/* Check for not supported parameters  */
-	if ((ec->rx_coalesce_usecs_irq) ||
-	    (ec->rx_max_coalesced_frames_irq) ||
-	    (ec->tx_coalesce_usecs) ||
-	    (ec->tx_coalesce_usecs_irq) ||
-	    (ec->tx_max_coalesced_frames_irq) ||
-	    (ec->stats_block_coalesce_usecs) ||
-	    (ec->use_adaptive_rx_coalesce) ||
-	    (ec->use_adaptive_tx_coalesce) ||
-	    (ec->pkt_rate_low) ||
-	    (ec->rx_coalesce_usecs_low) ||
-	    (ec->rx_max_coalesced_frames_low) ||
-	    (ec->tx_coalesce_usecs_low) ||
-	    (ec->tx_max_coalesced_frames_low) ||
-	    (ec->pkt_rate_high) ||
-	    (ec->rx_coalesce_usecs_high) ||
-	    (ec->rx_max_coalesced_frames_high) ||
-	    (ec->tx_coalesce_usecs_high) ||
-	    (ec->tx_max_coalesced_frames_high) ||
-	    (ec->rate_sample_interval)) {
-		netdev_err(netdev, "unsupported coalescing parameter\n");
-		return -EOPNOTSUPP;
-	}
-
 	rx_riwt = hw_if->usec_to_riwt(pdata, ec->rx_coalesce_usecs);
 	rx_usecs = ec->rx_coalesce_usecs;
 	rx_frames = ec->rx_max_coalesced_frames;
@@ -837,6 +813,8 @@ static int xgbe_set_channels(struct net_device *netdev,
 }
 
 static const struct ethtool_ops xgbe_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo = xgbe_get_drvinfo,
 	.get_msglevel = xgbe_get_msglevel,
 	.set_msglevel = xgbe_set_msglevel,

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

@@ -3472,6 +3472,12 @@ void bnxt_ethtool_free(struct bnxt *bp)
 }
 
 const struct ethtool_ops bnxt_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USECS_IRQ |
+				     ETHTOOL_COALESCE_MAX_FRAMES_IRQ |
+				     ETHTOOL_COALESCE_STATS_BLOCK_USECS |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE_RX,
 	.get_link_ksettings	= bnxt_get_link_ksettings,
 	.set_link_ksettings	= bnxt_set_link_ksettings,
 	.get_pauseparam		= bnxt_get_pauseparam,

drivers/net/ethernet/cisco/enic/enic_ethtool.c

@@ -323,25 +323,6 @@ static int enic_coalesce_valid(struct enic *enic,
 	u32 rx_coalesce_usecs_low = min_t(u32, coalesce_usecs_max,
 					  ec->rx_coalesce_usecs_low);
 
-	if (ec->rx_max_coalesced_frames		||
-	    ec->rx_coalesce_usecs_irq		||
-	    ec->rx_max_coalesced_frames_irq	||
-	    ec->tx_max_coalesced_frames		||
-	    ec->tx_coalesce_usecs_irq		||
-	    ec->tx_max_coalesced_frames_irq	||
-	    ec->stats_block_coalesce_usecs	||
-	    ec->use_adaptive_tx_coalesce	||
-	    ec->pkt_rate_low			||
-	    ec->rx_max_coalesced_frames_low	||
-	    ec->tx_coalesce_usecs_low		||
-	    ec->tx_max_coalesced_frames_low	||
-	    ec->pkt_rate_high			||
-	    ec->rx_max_coalesced_frames_high	||
-	    ec->tx_coalesce_usecs_high		||
-	    ec->tx_max_coalesced_frames_high	||
-	    ec->rate_sample_interval)
-		return -EINVAL;
-
 	if ((vnic_dev_get_intr_mode(enic->vdev) != VNIC_DEV_INTR_MODE_MSIX) &&
 	    ec->tx_coalesce_usecs)
 		return -EINVAL;
@@ -635,6 +616,10 @@ static int enic_get_ts_info(struct net_device *netdev,
 }
 
 static const struct ethtool_ops enic_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE_RX |
+				     ETHTOOL_COALESCE_RX_USECS_LOW |
+				     ETHTOOL_COALESCE_RX_USECS_HIGH,
 	.get_drvinfo = enic_get_drvinfo,
 	.get_msglevel = enic_get_msglevel,
 	.set_msglevel = enic_set_msglevel,

drivers/net/ethernet/hisilicon/hip04_eth.c

@@ -811,20 +811,6 @@ static int hip04_set_coalesce(struct net_device *netdev,
 {
 	struct hip04_priv *priv = netdev_priv(netdev);
 
-	/* Check not supported parameters  */
-	if ((ec->rx_max_coalesced_frames) || (ec->rx_coalesce_usecs_irq) ||
-	    (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) ||
-	    (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) ||
-	    (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) ||
-	    (ec->rx_max_coalesced_frames_low) || (ec->tx_coalesce_usecs_high) ||
-	    (ec->tx_max_coalesced_frames_low) || (ec->pkt_rate_high) ||
-	    (ec->tx_coalesce_usecs_low) || (ec->rx_coalesce_usecs_high) ||
-	    (ec->rx_max_coalesced_frames_high) || (ec->rx_coalesce_usecs) ||
-	    (ec->tx_max_coalesced_frames_irq) ||
-	    (ec->stats_block_coalesce_usecs) ||
-	    (ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval))
-		return -EOPNOTSUPP;
-
 	if ((ec->tx_coalesce_usecs > HIP04_MAX_TX_COALESCE_USECS ||
 	     ec->tx_coalesce_usecs < HIP04_MIN_TX_COALESCE_USECS) ||
 	    (ec->tx_max_coalesced_frames > HIP04_MAX_TX_COALESCE_FRAMES ||
@@ -845,6 +831,8 @@ static void hip04_get_drvinfo(struct net_device *netdev,
 }
 
 static const struct ethtool_ops hip04_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_TX_USECS |
+				     ETHTOOL_COALESCE_TX_MAX_FRAMES,
 	.get_coalesce		= hip04_get_coalesce,
 	.set_coalesce		= hip04_set_coalesce,
 	.get_drvinfo		= hip04_get_drvinfo,

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -2307,6 +2307,7 @@ static int e1000e_get_ts_info(struct net_device *netdev,
 }
 
 static const struct ethtool_ops e1000_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
 	.get_drvinfo		= e1000_get_drvinfo,
 	.get_regs_len		= e1000_get_regs_len,
 	.get_regs		= e1000_get_regs,

drivers/net/ethernet/intel/ice/ice_ethtool.c

@@ -3452,12 +3452,6 @@ ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
 
 		break;
 	case ICE_TX_CONTAINER:
-		if (ec->tx_coalesce_usecs_high) {
-			netdev_info(vsi->netdev, "setting %s-usecs-high is not supported\n",
-				    c_type_str);
-			return -EINVAL;
-		}
-
 		use_adaptive_coalesce = ec->use_adaptive_tx_coalesce;
 		coalesce_usecs = ec->tx_coalesce_usecs;
 
@@ -3533,53 +3527,6 @@ ice_set_q_coalesce(struct ice_vsi *vsi, struct ethtool_coalesce *ec, int q_num)
 	return 0;
 }
 
-/**
- * ice_is_coalesce_param_invalid - check for unsupported coalesce parameters
- * @netdev: pointer to the netdev associated with this query
- * @ec: ethtool structure to fill with driver's coalesce settings
- *
- * Print netdev info if driver doesn't support one of the parameters
- * and return error. When any parameters will be implemented, remove only
- * this parameter from param array.
- */
-static int
-ice_is_coalesce_param_invalid(struct net_device *netdev,
-			      struct ethtool_coalesce *ec)
-{
-	struct ice_ethtool_not_used {
-		u32 value;
-		const char *name;
-	} param[] = {
-		{ec->stats_block_coalesce_usecs, "stats-block-usecs"},
-		{ec->rate_sample_interval, "sample-interval"},
-		{ec->pkt_rate_low, "pkt-rate-low"},
-		{ec->pkt_rate_high, "pkt-rate-high"},
-		{ec->rx_max_coalesced_frames, "rx-frames"},
-		{ec->rx_coalesce_usecs_irq, "rx-usecs-irq"},
-		{ec->rx_max_coalesced_frames_irq, "rx-frames-irq"},
-		{ec->tx_max_coalesced_frames, "tx-frames"},
-		{ec->tx_coalesce_usecs_irq, "tx-usecs-irq"},
-		{ec->tx_max_coalesced_frames_irq, "tx-frames-irq"},
-		{ec->rx_coalesce_usecs_low, "rx-usecs-low"},
-		{ec->rx_max_coalesced_frames_low, "rx-frames-low"},
-		{ec->tx_coalesce_usecs_low, "tx-usecs-low"},
-		{ec->tx_max_coalesced_frames_low, "tx-frames-low"},
-		{ec->rx_max_coalesced_frames_high, "rx-frames-high"},
-		{ec->tx_max_coalesced_frames_high, "tx-frames-high"}
-	};
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(param); i++) {
-		if (param[i].value) {
-			netdev_info(netdev, "Setting %s not supported\n",
-				    param[i].name);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
 /**
  * ice_print_if_odd_usecs - print message if user tries to set odd [tx|rx]-usecs
  * @netdev: netdev used for print
@@ -3620,9 +3567,6 @@ __ice_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec,
 	struct ice_netdev_priv *np = netdev_priv(netdev);
 	struct ice_vsi *vsi = np->vsi;
 
-	if (ice_is_coalesce_param_invalid(netdev, ec))
-		return -EINVAL;
-
 	if (q_num < 0) {
 		struct ice_q_vector *q_vector = vsi->q_vectors[0];
 		int v_idx;
@@ -3817,6 +3761,9 @@ ice_get_module_eeprom(struct net_device *netdev,
 }
 
 static const struct ethtool_ops ice_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE |
+				     ETHTOOL_COALESCE_RX_USECS_HIGH,
 	.get_link_ksettings	= ice_get_link_ksettings,
 	.set_link_ksettings	= ice_set_link_ksettings,
 	.get_drvinfo		= ice_get_drvinfo,

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -1965,6 +1965,9 @@ static int mlx5e_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 }
 
 const struct ethtool_ops mlx5e_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE,
 	.get_drvinfo       = mlx5e_get_drvinfo,
 	.get_link          = ethtool_op_get_link,
 	.get_strings       = mlx5e_get_strings,

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c

@@ -376,6 +376,9 @@ static int mlx5e_uplink_rep_set_link_ksettings(struct net_device *netdev,
 }
 
 static const struct ethtool_ops mlx5e_rep_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE,
 	.get_drvinfo	   = mlx5e_rep_get_drvinfo,
 	.get_link	   = ethtool_op_get_link,
 	.get_strings       = mlx5e_rep_get_strings,
@@ -392,6 +395,9 @@ static const struct ethtool_ops mlx5e_rep_ethtool_ops = {
 };
 
 static const struct ethtool_ops mlx5e_uplink_rep_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE,
 	.get_drvinfo	   = mlx5e_uplink_rep_get_drvinfo,
 	.get_link	   = ethtool_op_get_link,
 	.get_strings       = mlx5e_rep_get_strings,

drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c

@@ -235,6 +235,9 @@ static int mlx5i_get_link_ksettings(struct net_device *netdev,
 }
 
 const struct ethtool_ops mlx5i_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE,
 	.get_drvinfo        = mlx5i_get_drvinfo,
 	.get_strings        = mlx5i_get_strings,
 	.get_sset_count     = mlx5i_get_sset_count,

drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c

@@ -1343,26 +1343,6 @@ static int nfp_net_set_coalesce(struct net_device *netdev,
 	struct nfp_net *nn = netdev_priv(netdev);
 	unsigned int factor;
 
-	if (ec->rx_coalesce_usecs_irq ||
-	    ec->rx_max_coalesced_frames_irq ||
-	    ec->tx_coalesce_usecs_irq ||
-	    ec->tx_max_coalesced_frames_irq ||
-	    ec->stats_block_coalesce_usecs ||
-	    ec->use_adaptive_rx_coalesce ||
-	    ec->use_adaptive_tx_coalesce ||
-	    ec->pkt_rate_low ||
-	    ec->rx_coalesce_usecs_low ||
-	    ec->rx_max_coalesced_frames_low ||
-	    ec->tx_coalesce_usecs_low ||
-	    ec->tx_max_coalesced_frames_low ||
-	    ec->pkt_rate_high ||
-	    ec->rx_coalesce_usecs_high ||
-	    ec->rx_max_coalesced_frames_high ||
-	    ec->tx_coalesce_usecs_high ||
-	    ec->tx_max_coalesced_frames_high ||
-	    ec->rate_sample_interval)
-		return -EOPNOTSUPP;
-
 	/* Compute factor used to convert coalesce '_usecs' parameters to
 	 * ME timestamp ticks.  There are 16 ME clock cycles for each timestamp
 	 * count.
@@ -1476,6 +1456,8 @@ static int nfp_net_set_channels(struct net_device *netdev,
 }
 
 static const struct ethtool_ops nfp_net_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo		= nfp_net_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
 	.get_ringparam		= nfp_net_get_ringparam,

drivers/net/ethernet/pensando/ionic/ionic_ethtool.c

@@ -412,28 +412,6 @@ static int ionic_set_coalesce(struct net_device *netdev,
 	unsigned int i;
 	u32 coal;
 
-	if (coalesce->rx_max_coalesced_frames ||
-	    coalesce->rx_coalesce_usecs_irq ||
-	    coalesce->rx_max_coalesced_frames_irq ||
-	    coalesce->tx_max_coalesced_frames ||
-	    coalesce->tx_coalesce_usecs_irq ||
-	    coalesce->tx_max_coalesced_frames_irq ||
-	    coalesce->stats_block_coalesce_usecs ||
-	    coalesce->use_adaptive_rx_coalesce ||
-	    coalesce->use_adaptive_tx_coalesce ||
-	    coalesce->pkt_rate_low ||
-	    coalesce->rx_coalesce_usecs_low ||
-	    coalesce->rx_max_coalesced_frames_low ||
-	    coalesce->tx_coalesce_usecs_low ||
-	    coalesce->tx_max_coalesced_frames_low ||
-	    coalesce->pkt_rate_high ||
-	    coalesce->rx_coalesce_usecs_high ||
-	    coalesce->rx_max_coalesced_frames_high ||
-	    coalesce->tx_coalesce_usecs_high ||
-	    coalesce->tx_max_coalesced_frames_high ||
-	    coalesce->rate_sample_interval)
-		return -EINVAL;
-
 	ident = &lif->ionic->ident;
 	if (ident->dev.intr_coal_div == 0) {
 		netdev_warn(netdev, "bad HW value in dev.intr_coal_div = %d\n",
@@ -784,6 +762,7 @@ static int ionic_nway_reset(struct net_device *netdev)
 }
 
 static const struct ethtool_ops ionic_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
 	.get_drvinfo		= ionic_get_drvinfo,
 	.get_regs_len		= ionic_get_regs_len,
 	.get_regs		= ionic_get_regs,

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c

@@ -732,20 +732,6 @@ static int stmmac_set_coalesce(struct net_device *dev,
 	u32 rx_cnt = priv->plat->rx_queues_to_use;
 	unsigned int rx_riwt;
 
-	/* Check not supported parameters  */
-	if ((ec->rx_coalesce_usecs_irq) ||
-	    (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) ||
-	    (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) ||
-	    (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) ||
-	    (ec->rx_max_coalesced_frames_low) || (ec->tx_coalesce_usecs_high) ||
-	    (ec->tx_max_coalesced_frames_low) || (ec->pkt_rate_high) ||
-	    (ec->tx_coalesce_usecs_low) || (ec->rx_coalesce_usecs_high) ||
-	    (ec->rx_max_coalesced_frames_high) ||
-	    (ec->tx_max_coalesced_frames_irq) ||
-	    (ec->stats_block_coalesce_usecs) ||
-	    (ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval))
-		return -EOPNOTSUPP;
-
 	if (priv->use_riwt && (ec->rx_coalesce_usecs > 0)) {
 		rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv);
 
@@ -914,6 +900,8 @@ static int stmmac_set_tunable(struct net_device *dev,
 }
 
 static const struct ethtool_ops stmmac_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.begin = stmmac_check_if_running,
 	.get_drvinfo = stmmac_ethtool_getdrvinfo,
 	.get_msglevel = stmmac_ethtool_getmsglevel,

drivers/net/virtio_net.c

@@ -2202,23 +2202,14 @@ static int virtnet_get_link_ksettings(struct net_device *dev,
 static int virtnet_set_coalesce(struct net_device *dev,
 				struct ethtool_coalesce *ec)
 {
-	struct ethtool_coalesce ec_default = {
-		.cmd = ETHTOOL_SCOALESCE,
-		.rx_max_coalesced_frames = 1,
-	};
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i, napi_weight;
 
-	if (ec->tx_max_coalesced_frames > 1)
+	if (ec->tx_max_coalesced_frames > 1 ||
+	    ec->rx_max_coalesced_frames != 1)
 		return -EINVAL;
 
-	ec_default.tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
 	napi_weight = ec->tx_max_coalesced_frames ? NAPI_POLL_WEIGHT : 0;
-
-	/* disallow changes to fields not explicitly tested above */
-	if (memcmp(ec, &ec_default, sizeof(ec_default)))
-		return -EINVAL;
-
 	if (napi_weight ^ vi->sq[0].napi.weight) {
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
@@ -2273,6 +2264,7 @@ static void virtnet_update_settings(struct virtnet_info *vi)
 }
 
 static const struct ethtool_ops virtnet_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo = virtnet_get_drvinfo,
 	.get_link = ethtool_op_get_link,
 	.get_ringparam = virtnet_get_ringparam,

include/linux/ethtool.h

@@ -177,8 +177,44 @@ void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 				     const unsigned long *src);
 
+#define ETHTOOL_COALESCE_RX_USECS		BIT(0)
+#define ETHTOOL_COALESCE_RX_MAX_FRAMES		BIT(1)
+#define ETHTOOL_COALESCE_RX_USECS_IRQ		BIT(2)
+#define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ	BIT(3)
+#define ETHTOOL_COALESCE_TX_USECS		BIT(4)
+#define ETHTOOL_COALESCE_TX_MAX_FRAMES		BIT(5)
+#define ETHTOOL_COALESCE_TX_USECS_IRQ		BIT(6)
+#define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ	BIT(7)
+#define ETHTOOL_COALESCE_STATS_BLOCK_USECS	BIT(8)
+#define ETHTOOL_COALESCE_USE_ADAPTIVE_RX	BIT(9)
+#define ETHTOOL_COALESCE_USE_ADAPTIVE_TX	BIT(10)
+#define ETHTOOL_COALESCE_PKT_RATE_LOW		BIT(11)
+#define ETHTOOL_COALESCE_RX_USECS_LOW		BIT(12)
+#define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW	BIT(13)
+#define ETHTOOL_COALESCE_TX_USECS_LOW		BIT(14)
+#define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW	BIT(15)
+#define ETHTOOL_COALESCE_PKT_RATE_HIGH		BIT(16)
+#define ETHTOOL_COALESCE_RX_USECS_HIGH		BIT(17)
+#define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH	BIT(18)
+#define ETHTOOL_COALESCE_TX_USECS_HIGH		BIT(19)
+#define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH	BIT(20)
+#define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL	BIT(21)
+
+#define ETHTOOL_COALESCE_USECS						\
+	(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
+#define ETHTOOL_COALESCE_MAX_FRAMES					\
+	(ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
+#define ETHTOOL_COALESCE_USECS_IRQ					\
+	(ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
+#define ETHTOOL_COALESCE_MAX_FRAMES_IRQ		\
+	(ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |	\
+	 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
+#define ETHTOOL_COALESCE_USE_ADAPTIVE					\
+	(ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
+
 /**
  * struct ethtool_ops - optional netdev operations
+ * @supported_coalesce_params: supported types of interrupt coalescing.
  * @get_drvinfo: Report driver/device information.  Should only set the
  *	@driver, @version, @fw_version and @bus_info fields.  If not
  *	implemented, the @driver and @bus_info fields will be filled in
@@ -207,8 +243,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
  *	or zero.
  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
  *	error code or zero.
- * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
- *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Supported coalescing
+ *	types should be set in @supported_coalesce_params.
+ *	Returns a negative error code or zero.
  * @get_ringparam: Report ring sizes
  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
  * @get_pauseparam: Report pause parameters
@@ -292,7 +329,8 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
  *	It must check that the given queue number is valid. If neither a RX nor
  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
- *	queue has this number, ignore the inapplicable fields.
+ *	queue has this number, ignore the inapplicable fields. Supported
+ *	coalescing types should be set in @supported_coalesce_params.
  *	Returns a negative error code or zero.
  * @get_link_ksettings: Get various device settings including Ethernet link
  *	settings. The %cmd and %link_mode_masks_nwords fields should be
@@ -323,6 +361,7 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
  * of the generic netdev features interface.
  */
 struct ethtool_ops {
+	u32	supported_coalesce_params;
 	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
 	int	(*get_regs_len)(struct net_device *);
 	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);

net/ethtool/ioctl.c

@@ -1544,6 +1544,64 @@ static noinline_for_stack int ethtool_get_coalesce(struct net_device *dev,
 	return 0;
 }
 
+static bool
+ethtool_set_coalesce_supported(struct net_device *dev,
+			       struct ethtool_coalesce *coalesce)
+{
+	u32 supported_params = dev->ethtool_ops->supported_coalesce_params;
+	u32 nonzero_params = 0;
+
+	if (!supported_params)
+		return true;
+
+	if (coalesce->rx_coalesce_usecs)
+		nonzero_params |= ETHTOOL_COALESCE_RX_USECS;
+	if (coalesce->rx_max_coalesced_frames)
+		nonzero_params |= ETHTOOL_COALESCE_RX_MAX_FRAMES;
+	if (coalesce->rx_coalesce_usecs_irq)
+		nonzero_params |= ETHTOOL_COALESCE_RX_USECS_IRQ;
+	if (coalesce->rx_max_coalesced_frames_irq)
+		nonzero_params |= ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ;
+	if (coalesce->tx_coalesce_usecs)
+		nonzero_params |= ETHTOOL_COALESCE_TX_USECS;
+	if (coalesce->tx_max_coalesced_frames)
+		nonzero_params |= ETHTOOL_COALESCE_TX_MAX_FRAMES;
+	if (coalesce->tx_coalesce_usecs_irq)
+		nonzero_params |= ETHTOOL_COALESCE_TX_USECS_IRQ;
+	if (coalesce->tx_max_coalesced_frames_irq)
+		nonzero_params |= ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ;
+	if (coalesce->stats_block_coalesce_usecs)
+		nonzero_params |= ETHTOOL_COALESCE_STATS_BLOCK_USECS;
+	if (coalesce->use_adaptive_rx_coalesce)
+		nonzero_params |= ETHTOOL_COALESCE_USE_ADAPTIVE_RX;
+	if (coalesce->use_adaptive_tx_coalesce)
+		nonzero_params |= ETHTOOL_COALESCE_USE_ADAPTIVE_TX;
+	if (coalesce->pkt_rate_low)
+		nonzero_params |= ETHTOOL_COALESCE_PKT_RATE_LOW;
+	if (coalesce->rx_coalesce_usecs_low)
+		nonzero_params |= ETHTOOL_COALESCE_RX_USECS_LOW;
+	if (coalesce->rx_max_coalesced_frames_low)
+		nonzero_params |= ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW;
+	if (coalesce->tx_coalesce_usecs_low)
+		nonzero_params |= ETHTOOL_COALESCE_TX_USECS_LOW;
+	if (coalesce->tx_max_coalesced_frames_low)
+		nonzero_params |= ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW;
+	if (coalesce->pkt_rate_high)
+		nonzero_params |= ETHTOOL_COALESCE_PKT_RATE_HIGH;
+	if (coalesce->rx_coalesce_usecs_high)
+		nonzero_params |= ETHTOOL_COALESCE_RX_USECS_HIGH;
+	if (coalesce->rx_max_coalesced_frames_high)
+		nonzero_params |= ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH;
+	if (coalesce->tx_coalesce_usecs_high)
+		nonzero_params |= ETHTOOL_COALESCE_TX_USECS_HIGH;
+	if (coalesce->tx_max_coalesced_frames_high)
+		nonzero_params |= ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH;
+	if (coalesce->rate_sample_interval)
+		nonzero_params |= ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL;
+
+	return (supported_params & nonzero_params) == nonzero_params;
+}
+
 static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev,
 						   void __user *useraddr)
 {
@@ -1555,6 +1613,9 @@ static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev,
 	if (copy_from_user(&coalesce, useraddr, sizeof(coalesce)))
 		return -EFAULT;
 
+	if (!ethtool_set_coalesce_supported(dev, &coalesce))
+		return -EOPNOTSUPP;
+
 	return dev->ethtool_ops->set_coalesce(dev, &coalesce);
 }
 
@@ -2336,6 +2397,11 @@ ethtool_set_per_queue_coalesce(struct net_device *dev,
 			goto roll_back;
 		}
 
+		if (!ethtool_set_coalesce_supported(dev, &coalesce)) {
+			ret = -EOPNOTSUPP;
+			goto roll_back;
+		}
+
 		ret = dev->ethtool_ops->set_per_queue_coalesce(dev, bit, &coalesce);
 		if (ret != 0)
 			goto roll_back;