can: flexcan: rename feature into quirks

This patch renames the "features" member of struct flexcan_devtype_data to
"quirks". The corresponding defines are renamed too, to reflect what they
actually do.

    FLEXCAN_HAS_V10_FEATURES      -> FLEXCAN_QUIRK_DISABLE_RXFG
    FLEXCAN_HAS_BROKEN_ERR_STATE  -> FLEXCAN_QUIRK_BROKEN_ERR_STATE
    FLEXCAN_HAS_MECR_FEATURES     -> FLEXCAN_QUIRK_DISABLE_MECR
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/flexcan.c

@@ -187,9 +187,9 @@
  *
  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
  */
-#define FLEXCAN_HAS_V10_FEATURES	BIT(1) /* For core version >= 10 */
-#define FLEXCAN_HAS_BROKEN_ERR_STATE	BIT(2) /* [TR]WRN_INT not connected */
-#define FLEXCAN_HAS_MECR_FEATURES	BIT(3) /* Memory error detection */
+#define FLEXCAN_QUIRK_BROKEN_ERR_STATE	BIT(1) /* [TR]WRN_INT not connected */
+#define FLEXCAN_QUIRK_DISABLE_RXFG	BIT(2) /* Disable RX FIFO Global mask */
+#define FLEXCAN_QUIRK_DISABLE_MECR	BIT(3) /* Disble Memory error detection */
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -244,7 +244,7 @@ struct flexcan_regs {
 };
 
 struct flexcan_devtype_data {
-	u32 features;	/* hardware controller features */
+	u32 quirks;		/* quirks needed for different IP cores */
 };
 
 struct flexcan_priv {
@@ -263,17 +263,17 @@ struct flexcan_priv {
 };
 
 static struct flexcan_devtype_data fsl_p1010_devtype_data = {
-	.features = FLEXCAN_HAS_BROKEN_ERR_STATE,
+	.quirks = FLEXCAN_QUIRK_BROKEN_ERR_STATE,
 };
 
 static struct flexcan_devtype_data fsl_imx28_devtype_data;
 
 static struct flexcan_devtype_data fsl_imx6q_devtype_data = {
-	.features = FLEXCAN_HAS_V10_FEATURES,
+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG,
 };
 
 static struct flexcan_devtype_data fsl_vf610_devtype_data = {
-	.features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_MECR_FEATURES,
+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_DISABLE_MECR,
 };
 
 static const struct can_bittiming_const flexcan_bittiming_const = {
@@ -870,7 +870,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * on most Flexcan cores, too. Otherwise we don't get
 	 * any error warning or passive interrupts.
 	 */
-	if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_ERR_STATE ||
 	    priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
 		reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
 	else
@@ -900,7 +900,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	flexcan_write(0x0, &regs->rx14mask);
 	flexcan_write(0x0, &regs->rx15mask);
 
-	if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES)
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
 		flexcan_write(0x0, &regs->rxfgmask);
 
 	/* On Vybrid, disable memory error detection interrupts
@@ -909,7 +909,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * false positive memory errors and put the device in
 	 * freeze mode.
 	 */
-	if (priv->devtype_data->features & FLEXCAN_HAS_MECR_FEATURES) {
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
 		/* Follow the protocol as described in "Detection
 		 * and Correction of Memory Errors" to write to
 		 * MECR register