Commit f46b563f authored by Linus Walleij's avatar Linus Walleij Committed by Olof Johansson

ARM: dts: augment Moxa and Aspeed DTS for FTTMR010

This augments the Moxa Art and Aspeed device trees to:

- Explicitly name the clock "PCLK" as the Faraday FTTMR010
  names it.
- List the Moxa timer as compatible with the Faradat FTTMR010
  vanilla version.
- Add a comment that the Aspeed driver is a Faraday
  FTTMR010 derivative.
- Pass all IRQs to the timer from Aspeed: they are all there
  so they should be in the device tree, we only use the
  first one anyways.
Tested-by: default avatarJoel Stanley <joel@jms.id.au>
Tested-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent b90b24f5
......@@ -886,13 +886,12 @@ gpio: gpio@1e780000 {
};
timer: timer@1e782000 {
/* This timer is a Faraday FTTMR010 derivative */
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
// The moxart_timer driver registers only one
// interrupt and assumes it's for timer 1
//interrupts = <16 17 18 35 36 37 38 39>;
interrupts = <16>;
interrupts = <16 17 18 35 36 37 38 39>;
clocks = <&clk_apb>;
clock-names = "PCLK";
};
wdt1: wdt@1e785000 {
......
......@@ -993,13 +993,12 @@ gpio: gpio@1e780000 {
};
timer: timer@1e782000 {
/* This timer is a Faraday FTTMR010 derivative */
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
// The moxart_timer driver registers only one
// interrupt and assumes it's for timer 1
//interrupts = <16 17 18 35 36 37 38 39>;
interrupts = <16>;
interrupts = <16 17 18 35 36 37 38 39>;
clocks = <&clk_apb>;
clock-names = "PCLK";
};
......
......@@ -58,10 +58,11 @@ clk_apb: clk_apb@98100000 {
};
timer: timer@98400000 {
compatible = "moxa,moxart-timer";
compatible = "moxa,moxart-timer", "faraday,fttmr010";
reg = <0x98400000 0x42>;
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
clocks = <&clk_apb>;
clock-names = "PCLK";
};
gpio: gpio@98700000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment