clk: imx6: don't restrict LDB mux changes on QuadPlus

The LDB mux/gate layout has been fixed on QuadPlus, so there is no need
to restrict the LDB mux changes on this hardware, as the erratum
preventing this from working properly is gone.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/imx/clk-imx6q.c

@@ -592,15 +592,20 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	imx6q_mmdc_ch1_mask_handshake(base);
 
-	/*
-	 * The LDB_DI0/1_SEL muxes are registered read-only due to a hardware
-	 * bug. Set the muxes to the requested values before registering the
-	 * ldb_di_sel clocks.
-	 */
-	init_ldb_clks(np, base);
+	if (clk_on_imx6qp()) {
+		clk[IMX6QDL_CLK_LDB_DI0_SEL]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+		clk[IMX6QDL_CLK_LDB_DI1_SEL]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	} else {
+		/*
+		 * The LDB_DI0/1_SEL muxes are registered read-only due to a hardware
+		 * bug. Set the muxes to the requested values before registering the
+		 * ldb_di_sel clocks.
+		 */
+		init_ldb_clks(np, base);
 
-	clk[IMX6QDL_CLK_LDB_DI0_SEL]      = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
-	clk[IMX6QDL_CLK_LDB_DI1_SEL]      = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
+		clk[IMX6QDL_CLK_LDB_DI0_SEL]      = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
+		clk[IMX6QDL_CLK_LDB_DI1_SEL]      = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels));
+	}
 	clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
 	clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
 	clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);