Remove dead logibusmouse.h.

include/linux/logibusmouse.h

-#ifndef _LINUX_BUSMOUSE_H
-#define _LINUX_BUSMOUSE_H
-
-/*
- * linux/include/linux/busmouse.h: header file for Logitech Bus Mouse driver
- * by James Banks
- *
- * based on information gleamed from various mouse drivers on the net
- *
- * Heavily modified by David giller (rafetmad@oxy.edu)
- *
- * Minor modifications for Linux 0.96c-pl1 by Nathan Laredo
- * gt7080a@prism.gatech.edu (13JUL92)
- *
- * Microsoft BusMouse support by Teemu Rantanen (tvr@cs.hut.fi) (02AUG92)
- *
- * Microsoft Bus Mouse support modified by Derrick Cole (cole@concert.net)
- *    8/28/92
- *
- * Microsoft Bus Mouse support folded into 0.97pl4 code
- *    by Peter Cervasio (pete%q106fm.uucp@wupost.wustl.edu) (08SEP92)
- * Changes:  Logitech and Microsoft support in the same kernel.
- *           Defined new constants in busmouse.h for MS mice.
- *           Added int mse_busmouse_type to distinguish busmouse types
- *           Added a couple of new functions to handle differences in using
- *             MS vs. Logitech (where the int variable wasn't appropriate).
- *
- */
-
-#define MOUSE_IRQ		5
-#define LOGITECH_BUSMOUSE       0   /* Minor device # for Logitech  */
-#define MICROSOFT_BUSMOUSE      2   /* Minor device # for Microsoft */
-
-/*--------- LOGITECH BUSMOUSE ITEMS -------------*/
-
-#define	LOGIBM_BASE		0x23c
-#define	MSE_DATA_PORT		0x23c
-#define	MSE_SIGNATURE_PORT	0x23d
-#define	MSE_CONTROL_PORT	0x23e
-#define	MSE_INTERRUPT_PORT	0x23e
-#define	MSE_CONFIG_PORT		0x23f
-#define	LOGIBM_EXTENT		0x4
-
-#define	MSE_ENABLE_INTERRUPTS	0x00
-#define	MSE_DISABLE_INTERRUPTS	0x10
-
-#define	MSE_READ_X_LOW		0x80
-#define	MSE_READ_X_HIGH		0xa0
-#define	MSE_READ_Y_LOW		0xc0
-#define	MSE_READ_Y_HIGH		0xe0
-
-/* Magic number used to check if the mouse exists */
-#define MSE_CONFIG_BYTE		0x91
-#define MSE_DEFAULT_MODE	0x90
-#define MSE_SIGNATURE_BYTE	0xa5
-
-/* useful Logitech Mouse macros */
-
-#define MSE_INT_OFF()	outb(MSE_DISABLE_INTERRUPTS, MSE_CONTROL_PORT)
-#define MSE_INT_ON()	outb(MSE_ENABLE_INTERRUPTS, MSE_CONTROL_PORT)
-
-/*--------- MICROSOFT BUSMOUSE ITEMS -------------*/
-
-#define	MSBM_BASE			0x23d
-#define	MS_MSE_DATA_PORT	        0x23d
-#define	MS_MSE_SIGNATURE_PORT	        0x23e
-#define	MS_MSE_CONTROL_PORT	        0x23c
-#define	MS_MSE_CONFIG_PORT		0x23f
-#define	MSBM_EXTENT			0x3
-
-#define	MS_MSE_ENABLE_INTERRUPTS	0x11
-#define	MS_MSE_DISABLE_INTERRUPTS	0x10
-
-#define	MS_MSE_READ_BUTTONS             0x00
-#define	MS_MSE_READ_X		        0x01
-#define	MS_MSE_READ_Y                   0x02
-
-#define MS_MSE_START                    0x80
-#define MS_MSE_COMMAND_MODE             0x07
-
-/* useful microsoft busmouse macros */
-
-#define MS_MSE_INT_OFF() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \
-			    outb(MS_MSE_DISABLE_INTERRUPTS, MS_MSE_DATA_PORT);}
-#define MS_MSE_INT_ON()  {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \
-			    outb(MS_MSE_ENABLE_INTERRUPTS, MS_MSE_DATA_PORT);}
-
- 
-struct mouse_status {
-	unsigned char	buttons;
-	unsigned char	latch_buttons;
-	int		dx;
-	int		dy;	
-	int 		present;
-	int		ready;
-	int		active;
-	wait_queue_head_t wait;
-	struct fasync_struct *fasyncptr;
-};
-
-/* Function Prototypes */
-
-#endif
-