Merge tag 'intel-pinctrl-v5.18-1' of...

Merge tag 'intel-pinctrl-v5.18-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.18-1

* Introduce support for Alder Lake-N (required to revert misplaced ID)
* Add support for Raptor Lake-S
* Add support for Ice Lake-N (MacBookPro16,2)
* Miscellaneous fixes

The following is an automated git shortlog grouped by driver:

alderlake:
 -  Add Intel Alder Lake-N pin controller support
 -  Add Raptor Lake-S ACPI ID

baytrail:
 -  Clear direct_irq_en flag on broken configs

icelake:
 -  Add Ice Lake-N PCH pin controller support

intel:
 -  Fix a glitch when updating IRQ flags on a preconfigured line
 -  fix unexpected interrupt

Place correctly CONFIG_PINCTRL_ST in the Makefile:
 - Place correctly CONFIG_PINCTRL_ST in the Makefile

tigerlake:
 -  Revert "Add Alder Lake-M ACPI ID"

drivers/pinctrl/Makefile

@@ -42,9 +42,9 @@ obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
 obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
+obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_STARFIVE)	+= pinctrl-starfive.o
 obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o
-obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o

drivers/pinctrl/intel/pinctrl-baytrail.c

@@ -32,6 +32,7 @@
 #define BYT_VAL_REG		0x008
 #define BYT_DFT_REG		0x00c
 #define BYT_INT_STAT_REG	0x800
+#define BYT_DIRECT_IRQ_REG	0x980
 #define BYT_DEBOUNCE_REG	0x9d0
 
 /* BYT_CONF0_REG register bits */
@@ -1465,6 +1466,51 @@ static void byt_gpio_irq_handler(struct irq_desc *desc)
 	chip->irq_eoi(data);
 }
 
+static bool byt_direct_irq_sanity_check(struct intel_pinctrl *vg, int pin, u32 conf0)
+{
+	int direct_irq, ioapic_direct_irq_base;
+	u8 *match, direct_irq_mux[16];
+	u32 trig;
+
+	memcpy_fromio(direct_irq_mux, vg->communities->pad_regs + BYT_DIRECT_IRQ_REG,
+		      sizeof(direct_irq_mux));
+	match = memchr(direct_irq_mux, pin, sizeof(direct_irq_mux));
+	if (!match) {
+		dev_warn(vg->dev, FW_BUG "pin %i: direct_irq_en set but no IRQ assigned, clearing\n", pin);
+		return false;
+	}
+
+	direct_irq = match - direct_irq_mux;
+	/* Base IO-APIC pin numbers come from atom-e3800-family-datasheet.pdf */
+	ioapic_direct_irq_base = (vg->communities->npins == BYT_NGPIO_SCORE) ? 51 : 67;
+	dev_dbg(vg->dev, "Pin %i: uses direct IRQ %d (IO-APIC %d)\n", pin,
+		direct_irq, direct_irq + ioapic_direct_irq_base);
+
+	/*
+	 * Testing has shown that the way direct IRQs work is that the combination of the
+	 * direct-irq-en flag and the direct IRQ mux connect the output of the GPIO's IRQ
+	 * trigger block, which normally sets the status flag in the IRQ status reg at
+	 * 0x800, to one of the IO-APIC pins according to the mux registers.
+	 *
+	 * This means that:
+	 * 1. The TRIG_MASK bits must be set to configure the GPIO's IRQ trigger block
+	 * 2. The TRIG_LVL bit *must* be set, so that the GPIO's input value is directly
+	 *    passed (1:1 or inverted) to the IO-APIC pin, if TRIG_LVL is not set,
+	 *    selecting edge mode operation then on the first edge the IO-APIC pin goes
+	 *    high, but since no write-to-clear write will be done to the IRQ status reg
+	 *    at 0x800, the detected edge condition will never get cleared.
+	 */
+	trig = conf0 & BYT_TRIG_MASK;
+	if (trig != (BYT_TRIG_POS | BYT_TRIG_LVL) &&
+	    trig != (BYT_TRIG_NEG | BYT_TRIG_LVL)) {
+		dev_warn(vg->dev, FW_BUG "pin %i: direct_irq_en set without trigger (conf0: %xh), clearing\n",
+			 pin, conf0);
+		return false;
+	}
+
+	return true;
+}
+
 static void byt_init_irq_valid_mask(struct gpio_chip *chip,
 				    unsigned long *valid_mask,
 				    unsigned int ngpios)
@@ -1492,8 +1538,13 @@ static void byt_init_irq_valid_mask(struct gpio_chip *chip,
 
 		value = readl(reg);
 		if (value & BYT_DIRECT_IRQ_EN) {
-			clear_bit(i, valid_mask);
-			dev_dbg(vg->dev, "excluding GPIO %d from IRQ domain\n", i);
+			if (byt_direct_irq_sanity_check(vg, i, value)) {
+				clear_bit(i, valid_mask);
+			} else {
+				value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS |
+					   BYT_TRIG_NEG | BYT_TRIG_LVL);
+				writel(value, reg);
+			}
 		} else if ((value & BYT_PIN_MUX) == byt_get_gpio_mux(vg, i)) {
 			byt_gpio_clear_triggering(vg, i);
 			dev_dbg(vg->dev, "disabling GPIO %d\n", i);

drivers/pinctrl/intel/pinctrl-intel.c

@@ -451,8 +451,8 @@ static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
 	value &= ~PADCFG0_PMODE_MASK;
 	value |= PADCFG0_PMODE_GPIO;
 
-	/* Disable input and output buffers */
-	value |= PADCFG0_GPIORXDIS;
+	/* Disable TX buffer and enable RX (this will be input) */
+	value &= ~PADCFG0_GPIORXDIS;
 	value |= PADCFG0_GPIOTXDIS;
 
 	/* Disable SCI/SMI/NMI generation */
@@ -497,9 +497,6 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
 
 	intel_gpio_set_gpio_mode(padcfg0);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(padcfg0, true);
-
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 
 	return 0;
@@ -1115,9 +1112,6 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type)
 
 	intel_gpio_set_gpio_mode(reg);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(reg, true);
-
 	value = readl(reg);
 
 	value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);
@@ -1216,6 +1210,39 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
 	return IRQ_RETVAL(ret);
 }
 
+static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
+{
+	int i;
+
+	for (i = 0; i < pctrl->ncommunities; i++) {
+		const struct intel_community *community;
+		void __iomem *base;
+		unsigned int gpp;
+
+		community = &pctrl->communities[i];
+		base = community->regs;
+
+		for (gpp = 0; gpp < community->ngpps; gpp++) {
+			/* Mask and clear all interrupts */
+			writel(0, base + community->ie_offset + gpp * 4);
+			writel(0xffff, base + community->is_offset + gpp * 4);
+		}
+	}
+}
+
+static int intel_gpio_irq_init_hw(struct gpio_chip *gc)
+{
+	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+
+	/*
+	 * Make sure the interrupt lines are in a proper state before
+	 * further configuration.
+	 */
+	intel_gpio_irq_init(pctrl);
+
+	return 0;
+}
+
 static int intel_gpio_add_community_ranges(struct intel_pinctrl *pctrl,
 				const struct intel_community *community)
 {
@@ -1320,6 +1347,7 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
 	girq->num_parents = 0;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_bad_irq;
+	girq->init_hw = intel_gpio_irq_init_hw;
 
 	ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl);
 	if (ret) {
@@ -1695,26 +1723,6 @@ int intel_pinctrl_suspend_noirq(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(intel_pinctrl_suspend_noirq);
 
-static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
-{
-	size_t i;
-
-	for (i = 0; i < pctrl->ncommunities; i++) {
-		const struct intel_community *community;
-		void __iomem *base;
-		unsigned int gpp;
-
-		community = &pctrl->communities[i];
-		base = community->regs;
-
-		for (gpp = 0; gpp < community->ngpps; gpp++) {
-			/* Mask and clear all interrupts */
-			writel(0, base + community->ie_offset + gpp * 4);
-			writel(0xffff, base + community->is_offset + gpp * 4);
-		}
-	}
-}
-
 static bool intel_gpio_update_reg(void __iomem *reg, u32 mask, u32 value)
 {
 	u32 curr, updated;

drivers/pinctrl/intel/pinctrl-tigerlake.c

@@ -749,7 +749,6 @@ static const struct acpi_device_id tgl_pinctrl_acpi_match[] = {
 	{ "INT34C5", (kernel_ulong_t)&tgllp_soc_data },
 	{ "INT34C6", (kernel_ulong_t)&tglh_soc_data },
 	{ "INTC1055", (kernel_ulong_t)&tgllp_soc_data },
-	{ "INTC1057", (kernel_ulong_t)&tgllp_soc_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, tgl_pinctrl_acpi_match);