ARM: dts: renesas: Group tuples in pci ranges and dma-ranges properties

To improve human readability and enable automatic validation, the tuples
in the "ranges" and "dma-ranges" properties of PCI devices nodes should
be grouped.  Not doing so causes "make dtbs_check" to emit warnings
like:

    pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not valid under any of the given schemas (Possible causes of the failure):
    pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not of type 'boolean'
    pcie@fe000000: dma-ranges:0: [1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0] is too long

Fix this by grouping the tuples of the "ranges" and "dma-ranges"
properties using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-5-geert+renesas@glider.beReviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>

arch/arm/boot/dts/r8a7743.dtsi

@@ -1611,13 +1611,13 @@ pciec: pcie@fe000000 {
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/r8a7744.dtsi

@@ -1597,13 +1597,13 @@ pciec: pcie@fe000000 {
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/r8a7790.dtsi

@@ -1614,13 +1614,13 @@ pciec: pcie@fe000000 {
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/r8a7791.dtsi

@@ -1598,13 +1598,13 @@ pciec: pcie@fe000000 {
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;