drm/amd/display: Ensure DCN save after VM setup

[Why]
DM initializes VM context after DMCUB initialization.
This results in loss of DCN_VM_CONTEXT registers after z10.

[How]
Notify DMCUB when VM setup is complete, and have DMCUB
save init registers.

v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -1549,6 +1549,12 @@ void dc_z10_restore(struct dc *dc)
 	if (dc->hwss.z10_restore)
 		dc->hwss.z10_restore(dc);
 }
+
+void dc_z10_save_init(struct dc *dc)
+{
+	if (dc->hwss.z10_save_init)
+		dc->hwss.z10_save_init(dc);
+}
 #endif
 /*
  * Applies given context to HW and copy it into current context.

drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c

@@ -47,6 +47,9 @@ int dc_setup_system_context(struct dc *dc, struct dc_phy_addr_space_config *pa_c
 		 */
 		memcpy(&dc->vm_pa_config, pa_config, sizeof(struct dc_phy_addr_space_config));
 		dc->vm_pa_config.valid = true;
+#if defined(CONFIG_DRM_AMD_DC_DCN)
+		dc_z10_save_init(dc);
+#endif
 	}
 
 	return num_vmids;

drivers/gpu/drm/amd/display/dc/dc.h

@@ -1338,6 +1338,7 @@ void dc_hardware_release(struct dc *dc);
 bool dc_set_psr_allow_active(struct dc *dc, bool enable);
 #if defined(CONFIG_DRM_AMD_DC_DCN)
 void dc_z10_restore(struct dc *dc);
+void dc_z10_save_init(struct dc *dc);
 #endif
 
 bool dc_enable_dmub_notifications(struct dc *dc);

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c

@@ -407,6 +407,18 @@ void dcn31_update_info_frame(struct pipe_ctx *pipe_ctx)
 			&pipe_ctx->stream_res.encoder_info_frame);
 	}
 }
+void dcn31_z10_save_init(struct dc *dc)
+{
+	union dmub_rb_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.dcn_restore.header.type = DMUB_CMD__IDLE_OPT;
+	cmd.dcn_restore.header.sub_type = DMUB_CMD__IDLE_OPT_DCN_SAVE_INIT;
+
+	dc_dmub_srv_cmd_queue(dc->ctx->dmub_srv, &cmd);
+	dc_dmub_srv_cmd_execute(dc->ctx->dmub_srv);
+	dc_dmub_srv_wait_idle(dc->ctx->dmub_srv);
+}
 
 void dcn31_z10_restore(struct dc *dc)
 {

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.h

@@ -44,6 +44,7 @@ void dcn31_enable_power_gating_plane(
 void dcn31_update_info_frame(struct pipe_ctx *pipe_ctx);
 
 void dcn31_z10_restore(struct dc *dc);
+void dcn31_z10_save_init(struct dc *dc);
 
 void dcn31_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool power_on);
 int dcn31_init_sys_ctx(struct dce_hwseq *hws, struct dc *dc, struct dc_phy_addr_space_config *pa_config);

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_init.c

@@ -97,6 +97,7 @@ static const struct hw_sequencer_funcs dcn31_funcs = {
 	.set_abm_immediate_disable = dcn21_set_abm_immediate_disable,
 	.set_pipe = dcn21_set_pipe,
 	.z10_restore = dcn31_z10_restore,
+	.z10_save_init = dcn31_z10_save_init,
 	.is_abm_supported = dcn31_is_abm_supported,
 	.set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
 	.update_visual_confirm_color = dcn20_update_visual_confirm_color,

drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h

@@ -237,6 +237,7 @@ struct hw_sequencer_funcs {
 			int width, int height, int offset);
 
 	void (*z10_restore)(struct dc *dc);
+	void (*z10_save_init)(struct dc *dc);
 
 	void (*update_visual_confirm_color)(struct dc *dc,
 			struct pipe_ctx *pipe_ctx,

drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h

@@ -860,6 +860,11 @@ enum dmub_cmd_idle_opt_type {
 	 * DCN hardware restore.
 	 */
 	DMUB_CMD__IDLE_OPT_DCN_RESTORE = 0,
+
+	/**
+	 * DCN hardware save.
+	 */
+	DMUB_CMD__IDLE_OPT_DCN_SAVE_INIT = 1
 };
 
 /**