ixgbe: Add support for GET_QUEUES message to get DCB configuration

This patch addresses several issues in regards to the combination of DCB
and SR-IOV. Specifically it allows us to send information to the VF on
which queues it should be using.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h

@@ -71,6 +71,7 @@
 enum ixgbe_pfvf_api_rev {
 	ixgbe_mbox_api_10,	/* API version 1.0, linux/freebsd VF driver */
 	ixgbe_mbox_api_20,	/* API version 2.0, solaris Phase1 VF driver */
+	ixgbe_mbox_api_11,	/* API version 1.1, linux/freebsd VF driver */
 	/* This value should always be last */
 	ixgbe_mbox_api_unknown,	/* indicates that API version is not known */
 };
@@ -86,6 +87,15 @@ enum ixgbe_pfvf_api_rev {
 #define IXGBE_VF_SET_MACVLAN	0x06 /* VF requests PF for unicast filter */
 #define IXGBE_VF_API_NEGOTIATE	0x08 /* negotiate API version */
 
+/* mailbox API, version 1.1 VF requests */
+#define IXGBE_VF_GET_QUEUES	0x09 /* get queue configuration */
+
+/* GET_QUEUES return data indices within the mailbox */
+#define IXGBE_VF_TX_QUEUES	1	/* number of Tx queues supported */
+#define IXGBE_VF_RX_QUEUES	2	/* number of Rx queues supported */
+#define IXGBE_VF_TRANS_VLAN	3	/* Indication of port vlan */
+#define IXGBE_VF_DEF_QUEUE	4	/* Default queue offset */
+
 /* length of permanent address message returned from PF */
 #define IXGBE_VF_PERMADDR_MSG_LEN 4
 /* word in permanent address message with the current multicast type */

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

@@ -751,6 +751,45 @@ static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
 	return -1;
 }
 
+static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
+			       u32 *msgbuf, u32 vf)
+{
+	struct net_device *dev = adapter->netdev;
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	unsigned int default_tc = 0;
+	u8 num_tcs = netdev_get_num_tc(dev);
+
+	/* verify the PF is supporting the correct APIs */
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ixgbe_mbox_api_20:
+	case ixgbe_mbox_api_11:
+		break;
+	default:
+		return -1;
+	}
+
+	/* only allow 1 Tx queue for bandwidth limiting */
+	msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+	msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+
+	/* if TCs > 1 determine which TC belongs to default user priority */
+	if (num_tcs > 1)
+		default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
+
+	/* notify VF of need for VLAN tag stripping, and correct queue */
+	if (num_tcs)
+		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
+	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
+		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
+	else
+		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
+
+	/* notify VF of default queue */
+	msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
+
+	return 0;
+}
+
 static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 {
 	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
@@ -804,6 +843,9 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 	case IXGBE_VF_API_NEGOTIATE:
 		retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
 		break;
+	case IXGBE_VF_GET_QUEUES:
+		retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
+		break;
 	default:
 		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
 		retval = IXGBE_ERR_MBX;