Commit f5d9bca6 authored by Brian Masney's avatar Brian Masney Committed by Jonathan Cameron

staging: iio: tsl2x7x: add common function for writing to the control register

There were four places where the same chunk of code was used to write
to the control register. This patch creates a common function
tsl2x7x_write_control_reg() to reduce duplicate code.

The function tsl2x7x_chip_off() did not correctly return an error
code so this patch also corrects that issue.
Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 107eb59b
......@@ -307,6 +307,21 @@ static int tsl2x7x_read_status(struct tsl2X7X_chip *chip)
return ret;
}
static int tsl2x7x_write_control_reg(struct tsl2X7X_chip *chip, u8 data)
{
int ret;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2X7X_CMD_REG | TSL2X7X_CNTRL, data);
if (ret < 0) {
dev_err(&chip->client->dev,
"%s: failed to write to control register %x: %d\n",
__func__, data, ret);
}
return ret;
}
/**
* tsl2x7x_get_lux() - Reads and calculates current lux value.
* @indio_dev: pointer to IIO device
......@@ -597,7 +612,6 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
int i;
int ret = 0;
u8 *dev_reg;
u8 utmp;
int als_count;
int als_time;
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
......@@ -659,14 +673,9 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
* TSL2X7X Specific power-on / adc enable sequence
* Power on the device 1st.
*/
utmp = TSL2X7X_CNTL_PWR_ON;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
if (ret < 0) {
dev_err(&chip->client->dev,
"%s: failed on CNTRL reg.\n", __func__);
ret = tsl2x7x_write_control_reg(chip, TSL2X7X_CNTL_PWR_ON);
if (ret < 0)
return ret;
}
/*
* Use the following shadow copy for our delay before enabling ADC.
......@@ -691,16 +700,12 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
* NOW enable the ADC
* initialize the desired mode of operation
*/
utmp = TSL2X7X_CNTL_PWR_ON |
TSL2X7X_CNTL_ADC_ENBL |
TSL2X7X_CNTL_PROX_DET_ENBL;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
if (ret < 0) {
dev_err(&chip->client->dev,
"%s: failed on 2nd CTRL reg.\n", __func__);
ret = tsl2x7x_write_control_reg(chip,
TSL2X7X_CNTL_PWR_ON |
TSL2X7X_CNTL_ADC_ENBL |
TSL2X7X_CNTL_PROX_DET_ENBL);
if (ret < 0)
return ret;
}
chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
......@@ -713,13 +718,9 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
reg_val |= chip->settings.interrupts_en;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2X7X_CMD_REG | TSL2X7X_CNTRL,
reg_val);
ret = tsl2x7x_write_control_reg(chip, reg_val);
if (ret < 0)
dev_err(&chip->client->dev,
"%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
__func__);
return ret;
ret = tsl2x7x_clear_interrupts(chip,
TSL2X7X_CMD_PROXALS_INT_CLR);
......@@ -732,16 +733,11 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
{
int ret;
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
/* turn device off */
chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
ret = i2c_smbus_write_byte_data(chip->client,
TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
return ret;
return tsl2x7x_write_control_reg(chip, 0x00);
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment