staging: rtl8192e: Remove unused Array Rtl8192PciERadioC_Array

The array Rtl8192PciERadioC_Array is only used in function
rtl92e_config_rf_path which is only called in function rtl92e_config_rf.
In function rtl92e_config_rf a termination condition for the loop is set
to priv->num_total_rf_path = RTL819X_TOTAL_RF_PATH = 2. The loop is only
executed with numbers 0 and 1 for eRFPath. So the function
rtl92e_config_rf_path is only called with eRFPath for 0 and 1 and never
with 2 that would make the "case RF90_PATH_C:" be called. Remove
resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/ed1e0df7ed677c335340f42c1108e7b5c0f18462.1678222487.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c

@@ -649,18 +649,6 @@ u8 rtl92e_config_rf_path(struct net_device *dev, enum rf90_radio_path eRFPath)
 					  bMask12Bits,
 					  Rtl819XRadioB_Array[i+1]);
 
-		}
-		break;
-	case RF90_PATH_C:
-		for (i = 0; i < RadioC_ArrayLength; i += 2) {
-			if (Rtl819XRadioC_Array[i] == 0xfe) {
-				msleep(100);
-				continue;
-			}
-			rtl92e_set_rf_reg(dev, eRFPath, Rtl819XRadioC_Array[i],
-					  bMask12Bits,
-					  Rtl819XRadioC_Array[i+1]);
-
 		}
 		break;
 	case RF90_PATH_D:

drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h

@@ -14,7 +14,6 @@
 #define RadioA_ArrayLength			RadioA_ArrayLengthPciE
 #define RadioB_ArrayLength			RadioB_ArrayLengthPciE
 #define MACPHY_Array_PGLength			MACPHY_Array_PGLengthPciE
-#define RadioC_ArrayLength			RadioC_ArrayLengthPciE
 #define RadioD_ArrayLength			RadioD_ArrayLengthPciE
 #define PHY_REG_1T2RArrayLength			PHY_REG_1T2RArrayLengthPciE
 
@@ -22,7 +21,6 @@
 #define Rtl819XMACPHY_Array			Rtl8192PciEMACPHY_Array
 #define Rtl819XRadioA_Array			Rtl8192PciERadioA_Array
 #define Rtl819XRadioB_Array			Rtl8192PciERadioB_Array
-#define Rtl819XRadioC_Array			Rtl8192PciERadioC_Array
 #define Rtl819XRadioD_Array			Rtl8192PciERadioD_Array
 #define Rtl819XAGCTAB_Array			Rtl8192PciEAGCTAB_Array
 #define Rtl819XPHY_REG_1T2RArray		Rtl8192PciEPHY_REG_1T2RArray

drivers/staging/rtl8192e/rtl8192e/table.c

@@ -325,9 +325,6 @@ u32 Rtl8192PciERadioB_Array[RadioB_ArrayLengthPciE] = {
 	0x007, 0x00000700,
 };
 
-u32 Rtl8192PciERadioC_Array[RadioC_ArrayLengthPciE] = {
-	0x0,  };
-
 u32 Rtl8192PciERadioD_Array[RadioD_ArrayLengthPciE] = {
 	0x0, };
 

drivers/staging/rtl8192e/rtl8192e/table.h

@@ -17,8 +17,6 @@ extern u32 Rtl8192PciEPHY_REG_1T2RArray[PHY_REG_1T2RArrayLengthPciE];
 extern u32 Rtl8192PciERadioA_Array[RadioA_ArrayLengthPciE];
 #define RadioB_ArrayLengthPciE 78
 extern u32 Rtl8192PciERadioB_Array[RadioB_ArrayLengthPciE];
-#define RadioC_ArrayLengthPciE 2
-extern u32 Rtl8192PciERadioC_Array[RadioC_ArrayLengthPciE];
 #define RadioD_ArrayLengthPciE 2
 extern u32 Rtl8192PciERadioD_Array[RadioD_ArrayLengthPciE];
 #define MACPHY_ArrayLengthPciE 18