Skip to content

L
linux
Commit f5f826c6 authored by Adrian Bunk's avatar Adrian Bunk Committed by Paul Mundt
Browse files
Options

sh: remove the broken SH_MPC1211 support 

SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 2a6b8148
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 1547 deletions
arch/sh/Kconfig
View file @ f5f826c6
......@@ -448,14 +448,6 @@ config SH_DREAMCAST
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
depends on CPU_SUBTYPE_SH7751 && BROKEN
help
CTP/PCI-SH02 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
......@@ -657,8 +649,7 @@ source "arch/sh/drivers/Kconfig"
endmenu
config ISA_DMA_API
def_bool y
depends on SH_MPC1211
bool
menu "Kernel features"
......@@ -763,7 +754,7 @@ menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
default "0x00004000" if SH_MPC1211 || SH_SH03
default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
......
arch/sh/Makefile
View file @ f5f826c6
......@@ -110,7 +110,6 @@ machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
......
arch/sh/boards/mpc1211/Makefile deleted 100644 → 0
View file @ 2a6b8148
#
# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
#
obj-y := setup.o rtc.o
obj-$(CONFIG_PCI) += pci.o
arch/sh/boards/mpc1211/pci.c deleted 100644 → 0
View file @ 2a6b8148
/*
* Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
*
* (c) 2002-2003 Saito.K & Jeanne
*
* Dustin McIntire (dustin@sensoria.com)
* Derived from arch/i386/kernel/pci-*.c which bore the message:
* (c) 1999--2000 Martin Mares <mj@ucw.cz>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/mpc1211/pci.h>
static struct resource mpcpci_io_resource = {
"MPCPCI IO",
0x00000000,
0xffffffff,
IORESOURCE_IO
};
static struct resource mpcpci_mem_resource = {
"MPCPCI mem",
0x00000000,
0xffffffff,
IORESOURCE_MEM
};
static struct pci_ops pci_direct_conf1;
struct pci_channel board_pci_channels[] = {
{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
{NULL, NULL, NULL, 0, 0},
};
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
{
u32 word;
unsigned long flags;
/*
* PCIPDR may only be accessed as 32 bit words,
* so we must do byte alignment by hand
*/
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
switch (size) {
case 1:
switch (where & 0x3) {
case 3:
*value = (u8)(word >> 24);
break;
case 2:
*value = (u8)(word >> 16);
break;
case 1:
*value = (u8)(word >> 8);
break;
default:
*value = (u8)word;
break;
}
break;
case 2:
switch (where & 0x3) {
case 3:
*value = (u16)(word >> 24);
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
*value |= ((word & 0xff) << 8);
break;
case 2:
*value = (u16)(word >> 16);
break;
case 1:
*value = (u16)(word >> 8);
break;
default:
*value = (u16)word;
break;
}
break;
case 4:
*value = word;
break;
}
PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
return PCIBIOS_SUCCESSFUL;
}
/*
* Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
* We'll allow an odd byte offset, though it should be illegal.
*/
static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
{
u32 word,mask = 0;
unsigned long flags;
u32 shift = (where & 3) * 8;
if(size == 1) {
mask = ((1 << 8) - 1) << shift; // create the byte mask
} else if(size == 2){
if(shift == 24)
return PCIBIOS_BAD_REGISTER_NUMBER;
mask = ((1 << 16) - 1) << shift; // create the word mask
}
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
if(size == 4){
writel(value, PCIPDR);
local_irq_restore(flags);
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
return PCIBIOS_SUCCESSFUL;
}
word = readl(PCIPDR);
word &= ~mask;
word |= ((value << shift) & mask);
writel(word, PCIPDR);
local_irq_restore(flags);
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
return PCIBIOS_SUCCESSFUL;
}
#undef CONFIG_CMD
static struct pci_ops pci_direct_conf1 = {
.read = pci_conf1_read,
.write = pci_conf1_write,
};
static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
{
dev->resource[0].start = 0x1f0;
dev->resource[0].end = 0x1f7;
dev->resource[0].flags = IORESOURCE_IO;
dev->resource[1].start = 0x3f6;
dev->resource[1].end = 0x3f6;
dev->resource[1].flags = IORESOURCE_IO;
dev->resource[2].start = 0x170;
dev->resource[2].end = 0x177;
dev->resource[2].flags = IORESOURCE_IO;
dev->resource[3].start = 0x376;
dev->resource[3].end = 0x376;
dev->resource[3].flags = IORESOURCE_IO;
dev->resource[4].start = 0xf000;
dev->resource[4].end = 0xf00f;
dev->resource[4].flags = IORESOURCE_IO;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
char * __devinit pcibios_setup(char *str)
{
return str;
}
/*
* Called after each bus is probed, but before its children
* are examined.
*/
void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
pci_read_bridge_bases(b);
}
/*
* IRQ functions
*/
static inline u8 bridge_swizzle(u8 pin, u8 slot)
{
return (((pin-1) + slot) % 4) + 1;
}
static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
{
return (((pin-1) - slot) & 3) + 1;
}
static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
{
unsigned long flags;
u8 pin = *pinp;
u32 word;
for ( ; dev->bus->self; dev = dev->bus->self) {
if (!pin)
continue;
if (dev->bus->number == 1) {
local_irq_save(flags);
writel(0x80000000 | 0x2c, PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
word >>= 16;
if (word == 0x0001)
pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
else
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
} else
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
}
*pinp = pin;
return PCI_SLOT(dev->devfn);
}
static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
if (dev->bus->number == 0) {
switch (slot) {
case 13: irq = 9; break; /* USB */
case 22: irq = 10; break; /* LAN */
default: irq = 0; break;
}
} else {
switch (pin) {
case 0: irq = 0; break;
case 1: irq = 7; break;
case 2: irq = 9; break;
case 3: irq = 10; break;
case 4: irq = 11; break;
}
}
if( irq < 0 ) {
PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}
PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
return irq;
}
void __init pcibios_fixup_irqs(void)
{
pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
}
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
if (start >= 0x10000UL) {
if ((start & 0xffffUL) < 0x4000UL) {
start = (start & 0xffff0000UL) + 0x4000UL;
} else if ((start & 0xffffUL) >= 0xf000UL) {
start = (start & 0xffff0000UL) + 0x10000UL;
}
res->start = start;
} else {
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
}
}
}
arch/sh/boards/mpc1211/rtc.c deleted 100644 → 0
View file @ 2a6b8148
/*
* linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
*
* Copyright (C) 2002 Saito.K & Jeanne
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
spin_lock(&rtc_lock);
do {
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
} while (sec != CMOS_READ(RTC_SECONDS));
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
spin_unlock(&rtc_lock);
year += 1900;
if (year < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
}
void mpc1211_rtc_gettimeofday(struct timeval *tv)
{
tv->tv_sec = get_cmos_time();
tv->tv_usec = 0;
}
/* arc/i386/kernel/time.c */
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
static int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock);
return retval;
}
int mpc1211_rtc_settimeofday(const struct timeval *tv)
{
unsigned long nowtime = tv->tv_sec;
return set_rtc_mmss(nowtime);
}
void mpc1211_time_init(void)
{
rtc_sh_get_time = mpc1211_rtc_gettimeofday;
rtc_sh_set_time = mpc1211_rtc_settimeofday;
}
arch/sh/boards/mpc1211/setup.c deleted 100644 → 0
View file @ 2a6b8148
/*
* linux/arch/sh/boards/mpc1211/setup.c
*
* Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
*
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
#include <asm/mpc1211/pci.h>
#include <asm/mpc1211/m1543c.h>
/* ALI15X3 SMBus address offsets */
#define SMBHSTSTS (0 + 0x3100)
#define SMBHSTCNT (1 + 0x3100)
#define SMBHSTSTART (2 + 0x3100)
#define SMBHSTCMD (7 + 0x3100)
#define SMBHSTADD (3 + 0x3100)
#define SMBHSTDAT0 (4 + 0x3100)
#define SMBHSTDAT1 (5 + 0x3100)
#define SMBBLKDAT (6 + 0x3100)
/* Other settings */
#define MAX_TIMEOUT 500 /* times 1/100 sec */
/* ALI15X3 command constants */
#define ALI15X3_ABORT 0x04
#define ALI15X3_T_OUT 0x08
#define ALI15X3_QUICK 0x00
#define ALI15X3_BYTE 0x10
#define ALI15X3_BYTE_DATA 0x20
#define ALI15X3_WORD_DATA 0x30
#define ALI15X3_BLOCK_DATA 0x40
#define ALI15X3_BLOCK_CLR 0x80
/* ALI15X3 status register bits */
#define ALI15X3_STS_IDLE 0x04
#define ALI15X3_STS_BUSY 0x08
#define ALI15X3_STS_DONE 0x10
#define ALI15X3_STS_DEV 0x20 /* device error */
#define ALI15X3_STS_COLL 0x40 /* collision or no response */
#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
static void __init pci_write_config(unsigned long busNo,
unsigned long devNo,
unsigned long fncNo,
unsigned long cnfAdd,
unsigned long cnfData)
{
ctrl_outl((0x80000000
+ ((busNo & 0xff) << 16)
+ ((devNo & 0x1f) << 11)
+ ((fncNo & 0x07) << 8)
+ (cnfAdd & 0xfc)), PCIPAR);
ctrl_outl(cnfData, PCIPDR);
}
/*
Initialize IRQ setting
*/
static unsigned char m_irq_mask = 0xfb;
static unsigned char s_irq_mask = 0xff;
static void disable_mpc1211_irq(unsigned int irq)
{
if( irq < 8) {
m_irq_mask |= (1 << irq);
outb(m_irq_mask,I8259_M_MR);
} else {
s_irq_mask |= (1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
}
static void enable_mpc1211_irq(unsigned int irq)
{
if( irq < 8) {
m_irq_mask &= ~(1 << irq);
outb(m_irq_mask,I8259_M_MR);
} else {
s_irq_mask &= ~(1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
}
static inline int mpc1211_irq_real(unsigned int irq)
{
int value;
int irqmask;
if ( irq < 8) {
irqmask = 1<<irq;
outb(0x0b,I8259_M_CR); /* ISR register */
value = inb(I8259_M_CR) & irqmask;
outb(0x0a,I8259_M_CR); /* back ro the IPR reg */
return value;
}
irqmask = 1<<(irq - 8);
outb(0x0b,I8259_S_CR); /* ISR register */
value = inb(I8259_S_CR) & irqmask;
outb(0x0a,I8259_S_CR); /* back ro the IPR reg */
return value;
}
static void mask_and_ack_mpc1211(unsigned int irq)
{
if(irq < 8) {
if(m_irq_mask & (1<<irq)){
if(!mpc1211_irq_real(irq)){
atomic_inc(&irq_err_count)
printk("spurious 8259A interrupt: IRQ %x\n",irq);
}
} else {
m_irq_mask |= (1<<irq);
}
inb(I8259_M_MR); /* DUMMY */
outb(m_irq_mask,I8259_M_MR); /* disable */
outb(0x60+irq,I8259_M_CR); /* EOI */
} else {
if(s_irq_mask & (1<<(irq - 8))){
if(!mpc1211_irq_real(irq)){
atomic_inc(&irq_err_count);
printk("spurious 8259A interrupt: IRQ %x\n",irq);
}
} else {
s_irq_mask |= (1<<(irq - 8));
}
inb(I8259_S_MR); /* DUMMY */
outb(s_irq_mask,I8259_S_MR); /* disable */
outb(0x60+(irq-8),I8259_S_CR); /* EOI */
outb(0x60+2,I8259_M_CR);
}
}
static void end_mpc1211_irq(unsigned int irq)
{
enable_mpc1211_irq(irq);
}
static unsigned int startup_mpc1211_irq(unsigned int irq)
{
enable_mpc1211_irq(irq);
return 0;
}
static void shutdown_mpc1211_irq(unsigned int irq)
{
disable_mpc1211_irq(irq);
}
static struct hw_interrupt_type mpc1211_irq_type = {
.typename = "MPC1211-IRQ",
.startup = startup_mpc1211_irq,
.shutdown = shutdown_mpc1211_irq,
.enable = enable_mpc1211_irq,
.disable = disable_mpc1211_irq,
.ack = mask_and_ack_mpc1211,
.end = end_mpc1211_irq
};
static void make_mpc1211_irq(unsigned int irq)
{
irq_desc[irq].chip = &mpc1211_irq_type;
irq_desc[irq].status = IRQ_DISABLED;
irq_desc[irq].action = 0;
irq_desc[irq].depth = 1;
disable_mpc1211_irq(irq);
}
int mpc1211_irq_demux(int irq)
{
unsigned int poll;
if( irq == 2 ) {
outb(0x0c,I8259_M_CR);
poll = inb(I8259_M_CR);
if(poll & 0x80) {
irq = (poll & 0x07);
}
if( irq == 2) {
outb(0x0c,I8259_S_CR);
poll = inb(I8259_S_CR);
irq = (poll & 0x07) + 8;
}
}
return irq;
}
static void __init init_mpc1211_IRQ(void)
{
int i;
/*
* Super I/O (Just mimic PC):
* 1: keyboard
* 3: serial 1
* 4: serial 0
* 5: printer
* 6: floppy
* 8: rtc
* 10: lan
* 12: mouse
* 14: ide0
* 15: ide1
*/
pci_write_config(0,0,0,0x54, 0xb0b0002d);
outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */
outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */
outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */
outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */
outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */
outb(0x02, I8259_S_MR); /* s icw3 slave id */
outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/
outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/
outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */
outb(0xff, I8259_S_MR); /* disable irq8--irq15 */
for ( i=0; i < 16; i++) {
if(i != 2) {
make_mpc1211_irq(i);
}
}
}
static void delay1000(void)
{
int i;
for (i=0; i<1000; i++)
ctrl_delay();
}
static int put_smb_blk(unsigned char *p, int address, int command, int no)
{
int temp;
int timeout;
int i;
outb(0xff, SMBHSTSTS);
temp = inb(SMBHSTSTS);
for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
delay1000();
temp = inb(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT){
return -1;
}
outb(((address & 0x7f) << 1), SMBHSTADD);
outb(0xc0, SMBHSTCNT);
outb(command & 0xff, SMBHSTCMD);
outb(no & 0x1f, SMBHSTDAT0);
for(i = 1; i <= no; i++) {
outb(*p++, SMBBLKDAT);
}
outb(0xff, SMBHSTSTART);
temp = inb(SMBHSTSTS);
for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
delay1000();
temp = inb(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT) {
return -2;
}
if ( temp & ALI15X3_STS_ERR ){
return -3;
}
return 0;
}
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa2000000,
.end = 0xa2000000,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *mpc1211_devices[] __initdata = {
&heartbeat_device,
};
static int __init mpc1211_devices_setup(void)
{
return platform_add_devices(mpc1211_devices,
ARRAY_SIZE(mpc1211_devices));
}
__initcall(mpc1211_devices_setup);
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
static void __init mpc1211_setup(char **cmdline_p)
{
unsigned char spd_buf[128];
__set_io_port_base(PA_PCI_IO);
pci_write_config(0,0,0,0x54, 0xb0b00000);
do {
outb(ALI15X3_ABORT, SMBHSTCNT);
spd_buf[0] = 0x0c;
spd_buf[1] = 0x43;
spd_buf[2] = 0x7f;
spd_buf[3] = 0x03;
spd_buf[4] = 0x00;
spd_buf[5] = 0x03;
spd_buf[6] = 0x00;
} while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
board_time_init = mpc1211_time_init;
return 0;
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_mpc1211 __initmv = {
.mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
.mv_setup = mpc1211_setup,
.mv_nr_irqs = 48,
.mv_irq_demux = mpc1211_irq_demux,
.mv_init_irq = init_mpc1211_IRQ,
};
arch/sh/tools/mach-types
View file @ f5f826c6
......@@ -28,7 +28,6 @@ HD64465 HD64465
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
......
drivers/mtd/maps/Kconfig
View file @ f5f826c6
......@@ -480,13 +480,6 @@ config MTD_H720X
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
config MTD_MPC1211
tristate "CFI Flash device mapped on Interface MPC-1211"
depends on SH_MPC1211 && MTD_CFI
help
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
......
drivers/mtd/maps/Makefile
View file @ f5f826c6
......@@ -58,7 +58,6 @@ obj-$(CONFIG_MTD_WALNUT) += walnut.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
obj-$(CONFIG_MTD_MPC1211) += mpc1211.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
......
drivers/mtd/maps/mpc1211.c deleted 100644 → 0
View file @ 2a6b8148
/*
* Flash on MPC-1211
*
* $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
*
* (C) 2002 Interface, Saito.K & Jeanne
*
* GPL'd
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
static struct mtd_info *flash_mtd;
static struct mtd_partition *parsed_parts;
struct map_info mpc1211_flash_map = {
.name = "MPC-1211 FLASH",
.size = 0x80000,
.bankwidth = 1,
};
static struct mtd_partition mpc1211_partitions[] = {
{
.name = "IPL & ETH-BOOT",
.offset = 0x00000000,
.size = 0x10000,
},
{
.name = "Flash FS",
.offset = 0x00010000,
.size = MTDPART_SIZ_FULL,
}
};
static int __init init_mpc1211_maps(void)
{
int nr_parts;
mpc1211_flash_map.phys = 0;
mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
simple_map_init(&mpc1211_flash_map);
printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
if (!flash_mtd) {
printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
return -ENXIO;
}
printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
flash_mtd->module = THIS_MODULE;
parsed_parts = mpc1211_partitions;
nr_parts = ARRAY_SIZE(mpc1211_partitions);
add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
return 0;
}
static void __exit cleanup_mpc1211_maps(void)
{
if (parsed_parts)
del_mtd_partitions(flash_mtd);
else
del_mtd_device(flash_mtd);
map_destroy(flash_mtd);
}
module_init(init_mpc1211_maps);
module_exit(cleanup_mpc1211_maps);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>");
MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");
include/asm-sh/keyboard.h deleted 100644 → 0
View file @ 2a6b8148
#ifndef __ASM_SH_KEYBOARD_H
#define __ASM_SH_KEYBOARD_H
/*
* $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
*/
#include <linux/kd.h>
#include <asm/machvec.h>
#ifdef CONFIG_SH_MPC1211
#include <asm/mpc1211/keyboard-mpc1211.h>
#endif
#endif
include/asm-sh/mpc1211/dma.h deleted 100644 → 0
View file @ 2a6b8148
This diff is collapsed.
include/asm-sh/mpc1211/io.h deleted 100644 → 0
View file @ 2a6b8148
/*
* include/asm-sh/mpc1211/io.h
*
* Copyright 2001 Saito.K & Jeanne
*
* IO functions for an Interface MPC-1211
*/
#ifndef _ASM_SH_IO_MPC1211_H
#define _ASM_SH_IO_MPC1211_H
#include <linux/time.h>
extern int mpc1211_irq_demux(int irq);
extern void init_mpc1211_IRQ(void);
extern void heartbeat_mpc1211(void);
extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
#endif /* _ASM_SH_IO_MPC1211_H */
include/asm-sh/mpc1211/keyboard.h deleted 100644 → 0
View file @ 2a6b8148
/*
* MPC1211 specific keybord definitions
* Taken from the old asm-i386/keybord.h for PC/AT-style definitions
* created 3 Nov 1996 by Geert Uytterhoeven.
*/
#ifdef __KERNEL__
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/kd.h>
#include <linux/pm.h>
#include <asm/io.h>
#define KEYBOARD_IRQ 1
#define DISABLE_KBD_DURING_INTERRUPTS 0
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
extern pm_callback pm_kbd_request_override;
#define kbd_setkeycode pckbd_setkeycode
#define kbd_getkeycode pckbd_getkeycode
#define kbd_translate pckbd_translate
#define kbd_unexpected_up pckbd_unexpected_up
#define kbd_leds pckbd_leds
#define kbd_init_hw pckbd_init_hw
/* resource allocation */
#define kbd_request_region()
#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
"keyboard", NULL)
/* How to access the keyboard macros on this platform. */
#define kbd_read_input() inb(KBD_DATA_REG)
#define kbd_read_status() inb(KBD_STATUS_REG)
#define kbd_write_output(val) outb(val, KBD_DATA_REG)
#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
/* Some stoneage hardware needs delays after some operations. */
#define kbd_pause() do { } while(0)
/*
* Machine specific bits for the PS/2 driver
*/
#define AUX_IRQ 12
#define aux_request_irq(hand, dev_id) \
request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
#endif /* __KERNEL__ */
include/asm-sh/mpc1211/m1543c.h deleted 100644 → 0
View file @ 2a6b8148
#ifndef __ASM_SH_M1543C_H
#define __ASM_SH_M1543C_H
/*
* linux/include/asm-sh/m1543c.h
* Copyright (C) 2001 Nobuhiro Sakawa
* M1543C:PCI-ISA Bus Bridge with Super IO Chip support
*
* from
*
* linux/include/asm-sh/smc37c93x.h
*
* Copyright (C) 2000 Kazumoto Kojima
*
* SMSC 37C93x Super IO Chip support
*/
/* Default base I/O address */
#define FDC_PRIMARY_BASE 0x3f0
#define IDE1_PRIMARY_BASE 0x1f0
#define IDE1_SECONDARY_BASE 0x170
#define PARPORT_PRIMARY_BASE 0x378
#define COM1_PRIMARY_BASE 0x2f8
#define COM2_PRIMARY_BASE 0x3f8
#define COM3_PRIMARY_BASE 0x3e8
#define RTC_PRIMARY_BASE 0x070
#define KBC_PRIMARY_BASE 0x060
#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
#define I8259_M_CR 0x20
#define I8259_M_MR 0x21
#define I8259_S_CR 0xa0
#define I8259_S_MR 0xa1
/* Logical device number */
#define LDN_FDC 0
#define LDN_IDE1 1
#define LDN_IDE2 2
#define LDN_PARPORT 3
#define LDN_COM1 4
#define LDN_COM2 5
#define LDN_COM3 11
#define LDN_RTC 6
#define LDN_KBC 7
/* Configuration port and key */
#define CONFIG_PORT 0x3f0
#define INDEX_PORT CONFIG_PORT
#define DATA_PORT 0x3f1
#define CONFIG_ENTER1 0x51
#define CONFIG_ENTER2 0x23
#define CONFIG_EXIT 0xbb
/* Configuration index */
#define CURRENT_LDN_INDEX 0x07
#define POWER_CONTROL_INDEX 0x22
#define ACTIVATE_INDEX 0x30
#define IO_BASE_HI_INDEX 0x60
#define IO_BASE_LO_INDEX 0x61
#define IRQ_SELECT_INDEX 0x70
#define PS2_IRQ_INDEX 0x72
#define DMA_SELECT_INDEX 0x74
/* UART stuff. Only for debugging. */
/* UART Register */
#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
#define UART_IER 0x2 /* Interrupt Enable Register */
#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
#define UART_LCR 0x6 /* Line Control Register */
#define UART_MCR 0x8 /* MODEM Control Register */
#define UART_LSR 0xa /* Line Status Register */
#define UART_MSR 0xc /* MODEM Status Register */
#define UART_SCR 0xe /* Scratch Register */
#define UART_DLL 0x0 /* Divisor Latch (LS) */
#define UART_DLM 0x2 /* Divisor Latch (MS) */
#ifndef __ASSEMBLY__
typedef struct uart_reg {
volatile __u16 rbr;
volatile __u16 ier;
volatile __u16 iir;
volatile __u16 lcr;
volatile __u16 mcr;
volatile __u16 lsr;
volatile __u16 msr;
volatile __u16 scr;
} uart_reg;
#endif /* ! __ASSEMBLY__ */
/* Alias for Write Only Register */
#define thr rbr
#define tcr iir
/* Alias for Divisor Latch Register */
#define dll rbr
#define dlm ier
#define fcr iir
/* Interrupt Enable Register */
#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
/* Interrupt Ident Register */
#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
#define IIR_FIFO 0xc000 /* FIFOs enabled */
/* FIFO Control Register */
#define FCR_FEN 0x0100 /* FIFO enable */
#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
#define FCR_DMA 0x0800 /* DMA mode select */
#define FCR_RTL 0x4000 /* Receiver triger (LSB) */
#define FCR_RTM 0x8000 /* Receiver triger (MSB) */
/* Line Control Register */
#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
#define LCR_STB 0x0400 /* Number of Stop Bits */
#define LCR_PEN 0x0800 /* Parity Enable */
#define LCR_EPS 0x1000 /* Even Parity Select */
#define LCR_SP 0x2000 /* Stick Parity */
#define LCR_SB 0x4000 /* Set Break */
#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
/* MODEM Control Register */
#define MCR_DTR 0x0100 /* Data Terminal Ready */
#define MCR_RTS 0x0200 /* Request to Send */
#define MCR_OUT1 0x0400 /* Out 1 */
#define MCR_IRQEN 0x0800 /* IRQ Enable */
#define MCR_LOOP 0x1000 /* Loop */
/* Line Status Register */
#define LSR_DR 0x0100 /* Data Ready */
#define LSR_OE 0x0200 /* Overrun Error */
#define LSR_PE 0x0400 /* Parity Error */
#define LSR_FE 0x0800 /* Framing Error */
#define LSR_BI 0x1000 /* Break Interrupt */
#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
#define LSR_TEMT 0x4000 /* Transmitter Empty */
#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
/* MODEM Status Register */
#define MSR_DCTS 0x0100 /* Delta Clear to Send */
#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
#define MSR_CTS 0x1000 /* Clear to Send */
#define MSR_DSR 0x2000 /* Data Set Ready */
#define MSR_RI 0x4000 /* Ring Indicator */
#define MSR_DCD 0x8000 /* Data Carrier Detect */
/* Baud Rate Divisor */
#define UART_CLK (1843200) /* 1.8432 MHz */
#define UART_BAUD(x) (UART_CLK / (16 * (x)))
/* RTC register definition */
#define RTC_SECONDS 0
#define RTC_SECONDS_ALARM 1
#define RTC_MINUTES 2
#define RTC_MINUTES_ALARM 3
#define RTC_HOURS 4
#define RTC_HOURS_ALARM 5
#define RTC_DAY_OF_WEEK 6
#define RTC_DAY_OF_MONTH 7
#define RTC_MONTH 8
#define RTC_YEAR 9
#define RTC_FREQ_SELECT 10
# define RTC_UIP 0x80
# define RTC_DIV_CTL 0x70
/* This RTC can work under 32.768KHz clock only. */
# define RTC_OSC_ENABLE 0x20
# define RTC_OSC_DISABLE 0x00
#define RTC_CONTROL 11
# define RTC_SET 0x80
# define RTC_PIE 0x40
# define RTC_AIE 0x20
# define RTC_UIE 0x10
# define RTC_SQWE 0x08
# define RTC_DM_BINARY 0x04
# define RTC_24H 0x02
# define RTC_DST_EN 0x01
#endif /* __ASM_SH_M1543C_H */
include/asm-sh/mpc1211/mc146818rtc.h deleted 100644 → 0
View file @ 2a6b8148
/*
* MPC1211 uses PC/AT style RTC definitions.
*/
#include <asm-x86/mc146818rtc_32.h>
include/asm-sh/mpc1211/mpc1211.h deleted 100644 → 0
View file @ 2a6b8148
#ifndef __ASM_SH_MPC1211_H
#define __ASM_SH_MPC1211_H
/*
* linux/include/asm-sh/mpc1211.h
*
* Copyright (C) 2001 Saito.K & Jeanne
*
* Interface MPC-1211 support
*/
#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
#define PCIPAR (0xa4000cf8) /* PCI Config address */
#define PCIPDR (0xa4000cfc) /* PCI Config data */
#endif /* __ASM_SH_MPC1211_H */
include/asm-sh/mpc1211/pci.h deleted 100644 → 0
View file @ 2a6b8148
/*
* Low-Level PCI Support for MPC-1211
*
* (c) 2002 Saito.K & Jeanne
*
*/
#ifndef _PCI_MPC1211_H_
#define _PCI_MPC1211_H_
#include <linux/pci.h>
/* set debug level 4=verbose...1=terse */
//#define DEBUG_PCI 3
#undef DEBUG_PCI
#ifdef DEBUG_PCI
#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
#else
#define PCIDBG(n, x...)
#endif
/* startup values */
#define PCI_PROBE_BIOS 1
#define PCI_PROBE_CONF1 2
#define PCI_PROBE_CONF2 4
#define PCI_NO_CHECKS 0x400
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
/* MPC-1211 Specific Values */
#define PCIPAR (0xa4000cf8) /* PCI Config address */
#define PCIPDR (0xa4000cfc) /* PCI Config data */
#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
#endif /* _PCI_MPC1211_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7