thermal/drivers/tsens: Allow configuring min and max trips

IPQ8074 and IPQ6018 dont support negative trip temperatures and support
up to 204 degrees C as the max trip temperature.

So, instead of always setting the -40 as min and 120 degrees C as max
allow it to be configured as part of the features.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

drivers/thermal/qcom/tsens-8960.c

@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_feat = {
 	.adc		= 1,
 	.srot_split	= 0,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 struct tsens_plat_data data_8960 = {

drivers/thermal/qcom/tsens-v0_1.c

@@ -543,6 +543,8 @@ static struct tsens_features tsens_v0_1_feat = {
 	.adc		= 1,
 	.srot_split	= 1,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {

drivers/thermal/qcom/tsens-v1.c

@@ -306,6 +306,8 @@ static struct tsens_features tsens_v1_feat = {
 	.adc		= 1,
 	.srot_split	= 1,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {

drivers/thermal/qcom/tsens-v2.c

@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_feat = {
 	.adc		= 0,
 	.srot_split	= 1,
 	.max_sensors	= 16,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {

drivers/thermal/qcom/tsens.c

@@ -573,8 +573,8 @@ static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
 	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
 		hw_id, __func__, low, high);
 
-	cl_high = clamp_val(high, -40000, 120000);
-	cl_low  = clamp_val(low, -40000, 120000);
+	cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
+	cl_low  = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
 
 	high_val = tsens_mC_to_hw(s, cl_high);
 	low_val  = tsens_mC_to_hw(s, cl_low);

drivers/thermal/qcom/tsens.h

@@ -499,6 +499,8 @@ enum regfield_ids {
  *              with SROT only being available to secure boot firmware?
  * @has_watchdog: does this IP support watchdog functionality?
  * @max_sensors: maximum sensors supported by this version of the IP
+ * @trip_min_temp: minimum trip temperature supported by this version of the IP
+ * @trip_max_temp: maximum trip temperature supported by this version of the IP
  */
 struct tsens_features {
 	unsigned int ver_major;
@@ -508,6 +510,8 @@ struct tsens_features {
 	unsigned int srot_split:1;
 	unsigned int has_watchdog:1;
 	unsigned int max_sensors;
+	int trip_min_temp;
+	int trip_max_temp;
 };
 
 /**