Commit f68e20f0 authored by Mohammed Shafi Shajakhan's avatar Mohammed Shafi Shajakhan Committed by John W. Linville

ath9k_hw: Add carrier leak correction in desired gain calculation

Cc: muddin@qca.qualcomm.com
Signed-off-by: default avatarMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent dcfcbd59
......@@ -246,13 +246,13 @@ static void ar9003_paprd_get_gain_table(struct ath_hw *ah)
static unsigned int ar9003_get_desired_gain(struct ath_hw *ah, int chain,
int target_power)
{
int olpc_gain_delta = 0;
int olpc_gain_delta = 0, cl_gain_mod;
int alpha_therm, alpha_volt;
int therm_cal_value, volt_cal_value;
int therm_value, volt_value;
int thermal_gain_corr, voltage_gain_corr;
int desired_scale, desired_gain = 0;
u32 reg;
u32 reg_olpc = 0, reg_cl_gain = 0;
REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1,
AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
......@@ -271,15 +271,29 @@ static unsigned int ar9003_get_desired_gain(struct ath_hw *ah, int chain,
volt_value = REG_READ_FIELD(ah, AR_PHY_BB_THERM_ADC_4,
AR_PHY_BB_THERM_ADC_4_LATEST_VOLT_VALUE);
if (chain == 0)
reg = AR_PHY_TPC_11_B0;
else if (chain == 1)
reg = AR_PHY_TPC_11_B1;
else
reg = AR_PHY_TPC_11_B2;
switch (chain) {
case 0:
reg_olpc = AR_PHY_TPC_11_B0;
reg_cl_gain = AR_PHY_CL_TAB_0;
break;
case 1:
reg_olpc = AR_PHY_TPC_11_B1;
reg_cl_gain = AR_PHY_CL_TAB_1;
break;
case 2:
reg_olpc = AR_PHY_TPC_11_B2;
reg_cl_gain = AR_PHY_CL_TAB_2;
break;
default:
ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
"Invalid chainmask: %d\n", chain);
break;
}
olpc_gain_delta = REG_READ_FIELD(ah, reg,
olpc_gain_delta = REG_READ_FIELD(ah, reg_olpc,
AR_PHY_TPC_11_OLPC_GAIN_DELTA);
cl_gain_mod = REG_READ_FIELD(ah, reg_cl_gain,
AR_PHY_CL_TAB_CL_GAIN_MOD);
if (olpc_gain_delta >= 128)
olpc_gain_delta = olpc_gain_delta - 256;
......@@ -289,7 +303,7 @@ static unsigned int ar9003_get_desired_gain(struct ath_hw *ah, int chain,
voltage_gain_corr = (alpha_volt * (volt_value - volt_cal_value) +
(128 / 2)) / 128;
desired_gain = target_power - olpc_gain_delta - thermal_gain_corr -
voltage_gain_corr + desired_scale;
voltage_gain_corr + desired_scale + cl_gain_mod;
return desired_gain;
}
......
......@@ -1121,6 +1121,9 @@
#define AR_PHY_POWERTX_RATE8_POWERTXHT40_5 0x3F00
#define AR_PHY_POWERTX_RATE8_POWERTXHT40_5_S 8
#define AR_PHY_CL_TAB_CL_GAIN_MOD 0x1f
#define AR_PHY_CL_TAB_CL_GAIN_MOD_S 0
void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx);
#endif /* AR9003_PHY_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment