Commit f6adb5f0 authored by Ville Syrjälä's avatar Ville Syrjälä

drm/i915: Reverse preemph vs. voltage swing preference

The DP spec says:
"When the combination of the requested pre-emphasis level and
 voltage swing exceeds the capability of a DPTX, the DPTX shall
 set the pre-emphasis level according to the request and use the
 highest voltage swing it can output with the given pre-emphasis level."
and
"When a DPTX reads a request beyond the limits of this Standard,
 the DPTX shall set the pre-emphasis level according to the request
 and set the highest voltage swing level it can output with the
 given pre-emphasis level. If a DPTX is requested for 9.5dB of
 pre-emphasis level (may be supported for a DPTX) and cannot support
 that level, it shall set the pre-emphasis level to the next
 highest level, 6dB."

Ie. we should first validate the pre-emphasis, and then select
the appropriate vswing for it.
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-6-ville.syrjala@linux.intel.comReviewed-by: default avatarManasi Navare <manasi.d.navare@intel.com>
parent 53de0a20
...@@ -34,18 +34,18 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE]) ...@@ -34,18 +34,18 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
link_status[3], link_status[4], link_status[5]); link_status[3], link_status[4], link_status[5]);
} }
static u8 dp_pre_emphasis_max(u8 voltage_swing) static u8 dp_voltage_max(u8 preemph)
{ {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { switch (preemph & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: case DP_TRAIN_PRE_EMPH_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_3; return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: case DP_TRAIN_PRE_EMPH_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2; return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: case DP_TRAIN_PRE_EMPH_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1; return DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: case DP_TRAIN_PRE_EMPH_LEVEL_3:
default: default:
return DP_TRAIN_PRE_EMPH_LEVEL_0; return DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
} }
} }
...@@ -68,15 +68,15 @@ void intel_dp_get_adjust_train(struct intel_dp *intel_dp, ...@@ -68,15 +68,15 @@ void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
p = this_p; p = this_p;
} }
voltage_max = intel_dp->voltage_max(intel_dp); preemph_max = intel_dp->preemph_max(intel_dp);
if (v >= voltage_max)
v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
preemph_max = min(intel_dp->preemph_max(intel_dp),
dp_pre_emphasis_max(v));
if (p >= preemph_max) if (p >= preemph_max)
p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
voltage_max = min(intel_dp->voltage_max(intel_dp),
dp_voltage_max(p));
if (v >= voltage_max)
v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
for (lane = 0; lane < 4; lane++) for (lane = 0; lane < 4; lane++)
intel_dp->train_set[lane] = v | p; intel_dp->train_set[lane] = v | p;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment