IB/ipath: Change use of constants for TID type to defined values

Define pkt rcvd 'type' in a way consistent with HW spec and chips.

The hardware considers received packets of type 0 to be expected, and
type 1 to be eager. The driver was calling the ipath_f_put_tid
functions using a variable called 'type' set to 0 for eager and to 1
for expected packets.  Worse, the iba6110 and iba6120 drivers used
those values inconsistently.  This was quite confusing.  Now
everything is consistent with the hardware.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ipath/ipath_file_ops.c

@@ -396,7 +396,8 @@ static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
 			   "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
 			   tid, vaddr, (unsigned long long) physaddr,
 			   pagep[i]);
-		dd->ipath_f_put_tid(dd, &tidbase[tid], 1, physaddr);
+		dd->ipath_f_put_tid(dd, &tidbase[tid], RCVHQ_RCV_TYPE_EXPECTED,
+				    physaddr);
 		/*
 		 * don't check this tid in ipath_portshadow, since we
 		 * just filled it in; start with the next one.
@@ -422,7 +423,8 @@ static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
 			if (dd->ipath_pageshadow[porttid + tid]) {
 				ipath_cdbg(VERBOSE, "Freeing TID %u\n",
 					   tid);
-				dd->ipath_f_put_tid(dd, &tidbase[tid], 1,
+				dd->ipath_f_put_tid(dd, &tidbase[tid],
+						    RCVHQ_RCV_TYPE_EXPECTED,
 						    dd->ipath_tidinvalid);
 				pci_unmap_page(dd->pcidev,
 					dd->ipath_physshadow[porttid + tid],
@@ -538,7 +540,8 @@ static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
 		if (dd->ipath_pageshadow[porttid + tid]) {
 			ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
 				   pd->port_pid, tid);
-			dd->ipath_f_put_tid(dd, &tidbase[tid], 1,
+			dd->ipath_f_put_tid(dd, &tidbase[tid],
+					    RCVHQ_RCV_TYPE_EXPECTED,
 					    dd->ipath_tidinvalid);
 			pci_unmap_page(dd->pcidev,
 				dd->ipath_physshadow[porttid + tid],
@@ -921,7 +924,8 @@ static int ipath_create_user_egr(struct ipath_portdata *pd)
 					    (u64 __iomem *)
 					    ((char __iomem *)
 					     dd->ipath_kregbase +
-					     dd->ipath_rcvegrbase), 0, pa);
+					     dd->ipath_rcvegrbase),
+					    RCVHQ_RCV_TYPE_EAGER, pa);
 			pa += egrsize;
 		}
 		cond_resched();	/* don't hog the cpu */

drivers/infiniband/hw/ipath/ipath_iba6110.c

@@ -1408,7 +1408,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
  * @tidptr: pointer to the expected TID (in chip) to udpate
- * @tidtype: 0 for eager, 1 for expected
+ * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
  * This exists as a separate routine to allow for special locking etc.
@@ -1429,7 +1429,7 @@ static void ipath_ht_put_tid(struct ipath_devdata *dd,
 				 "40 bits, using only 40!!!\n", pa);
 			pa &= INFINIPATH_RT_ADDR_MASK;
 		}
-		if (type == 0)
+		if (type == RCVHQ_RCV_TYPE_EAGER)
 			pa |= dd->ipath_tidtemplate;
 		else {
 			/* in words (fixed, full page).  */
@@ -1469,7 +1469,8 @@ static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
 				   port * dd->ipath_rcvtidcnt *
 				   sizeof(*tidbase));
 	for (i = 0; i < dd->ipath_rcvtidcnt; i++)
-		ipath_ht_put_tid(dd, &tidbase[i], 1, dd->ipath_tidinvalid);
+		ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+				 dd->ipath_tidinvalid);
 
 	tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
 				   dd->ipath_rcvegrbase +
@@ -1477,7 +1478,8 @@ static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
 				   sizeof(*tidbase));
 
 	for (i = 0; i < dd->ipath_rcvegrcnt; i++)
-		ipath_ht_put_tid(dd, &tidbase[i], 0, dd->ipath_tidinvalid);
+		ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+				 dd->ipath_tidinvalid);
 }
 
 /**

drivers/infiniband/hw/ipath/ipath_iba6120.c

@@ -1104,7 +1104,7 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
  * @tidptr: pointer to the expected TID (in chip) to udpate
- * @tidtype: 0 for eager, 1 for expected
+ * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
  * This exists as a separate routine to allow for special locking etc.
@@ -1130,7 +1130,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 				      "BUG: Physical page address 0x%lx "
 				      "has bits set in 31-29\n", pa);
 
-		if (type == 0)
+		if (type == RCVHQ_RCV_TYPE_EAGER)
 			pa |= dd->ipath_tidtemplate;
 		else /* for now, always full 4KB page */
 			pa |= 2 << 29;
@@ -1154,7 +1154,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
  * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
  * @dd: the infinipath device
  * @tidptr: pointer to the expected TID (in chip) to udpate
- * @tidtype: 0 for eager, 1 for expected
+ * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
  * This exists as a separate routine to allow for selection of the
@@ -1179,7 +1179,7 @@ static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr,
 				      "BUG: Physical page address 0x%lx "
 				      "has bits set in 31-29\n", pa);
 
-		if (type == 0)
+		if (type == RCVHQ_RCV_TYPE_EAGER)
 			pa |= dd->ipath_tidtemplate;
 		else /* for now, always full 4KB page */
 			pa |= 2 << 29;
@@ -1218,7 +1218,8 @@ static void ipath_pe_clear_tids(struct ipath_devdata *dd, unsigned port)
 		 port * dd->ipath_rcvtidcnt * sizeof(*tidbase));
 
 	for (i = 0; i < dd->ipath_rcvtidcnt; i++)
-		ipath_pe_put_tid(dd, &tidbase[i], 0, tidinv);
+		ipath_pe_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+				 tidinv);
 
 	tidbase = (u64 __iomem *)
 		((char __iomem *)(dd->ipath_kregbase) +
@@ -1226,7 +1227,8 @@ static void ipath_pe_clear_tids(struct ipath_devdata *dd, unsigned port)
 		 port * dd->ipath_rcvegrcnt * sizeof(*tidbase));
 
 	for (i = 0; i < dd->ipath_rcvegrcnt; i++)
-		ipath_pe_put_tid(dd, &tidbase[i], 1, tidinv);
+		ipath_pe_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+				 tidinv);
 }
 
 /**

drivers/infiniband/hw/ipath/ipath_init_chip.c

@@ -133,7 +133,8 @@ static int create_port0_egr(struct ipath_devdata *dd)
 				   dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
 		dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
 				    ((char __iomem *) dd->ipath_kregbase +
-				     dd->ipath_rcvegrbase), 0,
+				     dd->ipath_rcvegrbase),
+				    RCVHQ_RCV_TYPE_EAGER,
 				    dd->ipath_port0_skbinfo[e].phys);
 	}