dt-bindings: gpio: nxp,lpc3220-gpio: Convert to dtschema

Convert the NXP LPC3220 SoC GPIO controller bindings to DT schema format.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240731054442.109732-1-animeshagarwal28@gmail.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt

-NXP LPC32xx SoC GPIO controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 3:
-   1) bank:
-      0: GPIO P0
-      1: GPIO P1
-      2: GPIO P2
-      3: GPIO P3
-      4: GPI P3
-      5: GPO P3
-   2) pin number
-   3) optional parameters:
-      - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- reg: Index of the GPIO group
-
-Example:
-
-	gpio: gpio@40028000 {
-		compatible = "nxp,lpc3220-gpio";
-		reg = <0x40028000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <3>; /* bank, pin, flags */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-	};

Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,lpc3220-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC GPIO controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 3
+    description: |
+      1) bank:
+        0: GPIO P0
+        1: GPIO P1
+        2: GPIO P2
+        3: GPIO P3
+        4: GPI P3
+        5: GPO P3
+      2) pin number
+      3) flags:
+        - bit 0 specifies polarity (0 for normal, 1 for inverted)
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@40028000 {
+        compatible = "nxp,lpc3220-gpio";
+        reg = <0x40028000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <3>; /* bank, pin, flags */
+    };