Commit f749d8b7 authored by Don Brace's avatar Don Brace Committed by Martin K. Petersen

scsi: hpsa: Correct dev cmds outstanding for retried cmds

Prevent incrementing device->commands_outstanding for ioaccel command
retries that are driver initiated.  If the command goes through the retry
path, the device->commands_outstanding counter has already accounted for
the number of commands outstanding to the device.  Only commands going
through function hpsa_cmd_resolve_events decrement this counter.

 - ioaccel commands go to either HBA disks or to logical volumes comprised
   of SSDs.

The extra increment is causing device resets to hang.

 - Resets wait for all device outstanding commands to complete before
   returning.

Replace unused field abort_pending with retry_pending. This is a
maintenance driver so these changes have the least impact/risk.

Link: https://lore.kernel.org/r/161342801747.29388.13045495968308188518.stgit@brunhildaTested-by: default avatarJoe Szczypek <jszczype@redhat.com>
Reviewed-by: default avatarScott Benesh <scott.benesh@microchip.com>
Reviewed-by: default avatarScott Teel <scott.teel@microchip.com>
Reviewed-by: default avatarTomas Henzl <thenzl@redhat.com>
Signed-off-by: default avatarDon Brace <don.brace@microchip.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent aaf15f8c
......@@ -1151,7 +1151,10 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
{
dial_down_lockup_detection_during_fw_flash(h, c);
atomic_inc(&h->commands_outstanding);
if (c->device)
/*
* Check to see if the command is being retried.
*/
if (c->device && !c->retry_pending)
atomic_inc(&c->device->commands_outstanding);
reply_queue = h->reply_map[raw_smp_processor_id()];
......@@ -5567,7 +5570,8 @@ static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
}
static int hpsa_ioaccel_submit(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd)
struct CommandList *c, struct scsi_cmnd *cmd,
bool retry)
{
struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
int rc = IO_ACCEL_INELIGIBLE;
......@@ -5584,18 +5588,22 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
cmd->host_scribble = (unsigned char *) c;
if (dev->offload_enabled) {
hpsa_cmd_init(h, c->cmdindex, c);
hpsa_cmd_init(h, c->cmdindex, c); /* Zeroes out all fields */
c->cmd_type = CMD_SCSI;
c->scsi_cmd = cmd;
c->device = dev;
if (retry) /* Resubmit but do not increment device->commands_outstanding. */
c->retry_pending = true;
rc = hpsa_scsi_ioaccel_raid_map(h, c);
if (rc < 0) /* scsi_dma_map failed. */
rc = SCSI_MLQUEUE_HOST_BUSY;
} else if (dev->hba_ioaccel_enabled) {
hpsa_cmd_init(h, c->cmdindex, c);
hpsa_cmd_init(h, c->cmdindex, c); /* Zeroes out all fields */
c->cmd_type = CMD_SCSI;
c->scsi_cmd = cmd;
c->device = dev;
if (retry) /* Resubmit but do not increment device->commands_outstanding. */
c->retry_pending = true;
rc = hpsa_scsi_ioaccel_direct_map(h, c);
if (rc < 0) /* scsi_dma_map failed. */
rc = SCSI_MLQUEUE_HOST_BUSY;
......@@ -5628,7 +5636,8 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
if (c2->error_data.serv_response ==
IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) {
rc = hpsa_ioaccel_submit(h, c, cmd);
/* Resubmit with the retry_pending flag set. */
rc = hpsa_ioaccel_submit(h, c, cmd, true);
if (rc == 0)
return;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
......@@ -5644,6 +5653,15 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
}
}
hpsa_cmd_partial_init(c->h, c->cmdindex, c);
/*
* Here we have not come in though queue_command, so we
* can set the retry_pending flag to true for a driver initiated
* retry attempt (I.E. not a SML retry).
* I.E. We are submitting a driver initiated retry.
* Note: hpsa_ciss_submit does not zero out the command fields like
* ioaccel submit does.
*/
c->retry_pending = true;
if (hpsa_ciss_submit(c->h, c, cmd, dev)) {
/*
* If we get here, it means dma mapping failed. Try
......@@ -5706,11 +5724,16 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
/*
* Call alternate submit routine for I/O accelerated commands.
* Retries always go down the normal I/O path.
* Note: If cmd->retries is non-zero, then this is a SML
* initiated retry and not a driver initiated retry.
* This command has been obtained from cmd_tagged_alloc
* and is therefore a brand-new command.
*/
if (likely(cmd->retries == 0 &&
!blk_rq_is_passthrough(cmd->request) &&
h->acciopath_status)) {
rc = hpsa_ioaccel_submit(h, c, cmd);
/* Submit with the retry_pending flag unset. */
rc = hpsa_ioaccel_submit(h, c, cmd, false);
if (rc == 0)
return 0;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
......@@ -6105,6 +6128,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
* at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the
* block request tag as an index into a table of entries. cmd_tagged_free() is
* the complement, although cmd_free() may be called instead.
* This function is only called for new requests from queue_command.
*/
static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
struct scsi_cmnd *scmd)
......@@ -6139,8 +6163,14 @@ static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
}
atomic_inc(&c->refcount);
hpsa_cmd_partial_init(h, idx, c);
/*
* This is a new command obtained from queue_command so
* there have not been any driver initiated retry attempts.
*/
c->retry_pending = false;
return c;
}
......@@ -6208,6 +6238,13 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
}
hpsa_cmd_partial_init(h, i, c);
c->device = NULL;
/*
* cmd_alloc is for "internal" commands and they are never
* retried.
*/
c->retry_pending = false;
return c;
}
......
......@@ -448,7 +448,7 @@ struct CommandList {
*/
struct hpsa_scsi_dev_t *phys_disk;
int abort_pending;
bool retry_pending;
struct hpsa_scsi_dev_t *device;
atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
} __aligned(COMMANDLIST_ALIGNMENT);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment