Commit f76014f7 authored by Alexander Aring's avatar Alexander Aring Committed by David S. Miller

at86rf230: add regmap support

This patch adds regmap support for the at86rf230 driver and drop the
lowlevel spi access functions and use the regmap access functions.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 640985ec
......@@ -34,6 +34,7 @@ config IEEE802154_AT86RF230
depends on IEEE802154_DRIVERS && MAC802154
tristate "AT86RF230/231/233/212 transceiver driver"
depends on SPI
select REGMAP_SPI
---help---
Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless
controller.
......
......@@ -31,6 +31,7 @@
#include <linux/spinlock.h>
#include <linux/spi/spi.h>
#include <linux/spi/at86rf230.h>
#include <linux/regmap.h>
#include <linux/skbuff.h>
#include <linux/of_gpio.h>
......@@ -50,6 +51,7 @@ struct at86rf230_local {
struct completion tx_complete;
struct ieee802154_dev *dev;
struct regmap *regmap;
spinlock_t lock;
bool irq_busy;
......@@ -256,6 +258,157 @@ static bool is_rf212(struct at86rf230_local *local)
#define STATE_BUSY_RX_AACK_NOCLK 0x1E
#define STATE_TRANSITION_IN_PROGRESS 0x1F
#define AT86RF2XX_NUMREGS 0x3F
static inline int
__at86rf230_write(struct at86rf230_local *lp,
unsigned int addr, unsigned int data)
{
return regmap_write(lp->regmap, addr, data);
}
static inline int
__at86rf230_read(struct at86rf230_local *lp,
unsigned int addr, unsigned int *data)
{
return regmap_read(lp->regmap, addr, data);
}
static inline int
at86rf230_read_subreg(struct at86rf230_local *lp,
unsigned int addr, unsigned int mask,
unsigned int shift, unsigned int *data)
{
int rc;
rc = __at86rf230_read(lp, addr, data);
if (rc > 0)
*data = (*data & mask) >> shift;
return rc;
}
static inline int
at86rf230_write_subreg(struct at86rf230_local *lp,
unsigned int addr, unsigned int mask,
unsigned int shift, unsigned int data)
{
return regmap_update_bits(lp->regmap, addr, mask, data << shift);
}
static bool
at86rf230_reg_writeable(struct device *dev, unsigned int reg)
{
switch (reg) {
case RG_TRX_STATE:
case RG_TRX_CTRL_0:
case RG_TRX_CTRL_1:
case RG_PHY_TX_PWR:
case RG_PHY_ED_LEVEL:
case RG_PHY_CC_CCA:
case RG_CCA_THRES:
case RG_RX_CTRL:
case RG_SFD_VALUE:
case RG_TRX_CTRL_2:
case RG_ANT_DIV:
case RG_IRQ_MASK:
case RG_VREG_CTRL:
case RG_BATMON:
case RG_XOSC_CTRL:
case RG_RX_SYN:
case RG_XAH_CTRL_1:
case RG_FTN_CTRL:
case RG_PLL_CF:
case RG_PLL_DCU:
case RG_SHORT_ADDR_0:
case RG_SHORT_ADDR_1:
case RG_PAN_ID_0:
case RG_PAN_ID_1:
case RG_IEEE_ADDR_0:
case RG_IEEE_ADDR_1:
case RG_IEEE_ADDR_2:
case RG_IEEE_ADDR_3:
case RG_IEEE_ADDR_4:
case RG_IEEE_ADDR_5:
case RG_IEEE_ADDR_6:
case RG_IEEE_ADDR_7:
case RG_XAH_CTRL_0:
case RG_CSMA_SEED_0:
case RG_CSMA_SEED_1:
case RG_CSMA_BE:
return true;
default:
return false;
}
}
static bool
at86rf230_reg_readable(struct device *dev, unsigned int reg)
{
bool rc;
/* all writeable are also readable */
rc = at86rf230_reg_writeable(dev, reg);
if (rc)
return rc;
/* readonly regs */
switch (reg) {
case RG_TRX_STATUS:
case RG_PHY_RSSI:
case RG_IRQ_STATUS:
case RG_PART_NUM:
case RG_VERSION_NUM:
case RG_MAN_ID_1:
case RG_MAN_ID_0:
return true;
default:
return false;
}
}
static bool
at86rf230_reg_volatile(struct device *dev, unsigned int reg)
{
/* can be changed during runtime */
switch (reg) {
case RG_TRX_STATUS:
case RG_TRX_STATE:
case RG_PHY_RSSI:
case RG_PHY_ED_LEVEL:
case RG_IRQ_STATUS:
case RG_VREG_CTRL:
return true;
default:
return false;
}
}
static bool
at86rf230_reg_precious(struct device *dev, unsigned int reg)
{
/* don't clear irq line on read */
switch (reg) {
case RG_IRQ_STATUS:
return true;
default:
return false;
}
}
static struct regmap_config at86rf230_regmap_spi_config = {
.reg_bits = 8,
.val_bits = 8,
.write_flag_mask = CMD_REG | CMD_WRITE,
.read_flag_mask = CMD_REG,
.cache_type = REGCACHE_RBTREE,
.max_register = AT86RF2XX_NUMREGS,
.writeable_reg = at86rf230_reg_writeable,
.readable_reg = at86rf230_reg_readable,
.volatile_reg = at86rf230_reg_volatile,
.precious_reg = at86rf230_reg_precious,
};
static int
__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
u8 *version)
......@@ -307,105 +460,6 @@ __at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
return status;
}
static int
__at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer = {
.len = 2,
.tx_buf = buf,
};
buf[0] = (addr & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
buf[1] = data;
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
return status;
}
static int
__at86rf230_read_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 *data)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer = {
.len = 2,
.tx_buf = buf,
.rx_buf = buf,
};
buf[0] = (addr & CMD_REG_MASK) | CMD_REG;
buf[1] = 0xff;
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
if (status == 0)
*data = (buf[1] & mask) >> shift;
return status;
}
static int
at86rf230_read_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 *data)
{
int status;
mutex_lock(&lp->bmux);
status = __at86rf230_read_subreg(lp, addr, mask, shift, data);
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_write_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 data)
{
int status;
u8 val;
mutex_lock(&lp->bmux);
status = __at86rf230_read_subreg(lp, addr, 0xff, 0, &val);
if (status)
goto out;
val &= ~mask;
val |= (data << shift) & mask;
status = __at86rf230_write(lp, addr, val);
out:
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_write_fbuf(struct at86rf230_local *lp, u8 *data, u8 len)
{
......@@ -520,7 +574,7 @@ at86rf230_state(struct ieee802154_dev *dev, int state)
{
struct at86rf230_local *lp = dev->priv;
int rc;
u8 val;
unsigned int val;
u8 desired_status;
might_sleep();
......@@ -890,12 +944,11 @@ static void at86rf230_irqwork(struct work_struct *work)
{
struct at86rf230_local *lp =
container_of(work, struct at86rf230_local, irqwork);
u8 status = 0, val;
unsigned int status;
int rc;
unsigned long flags;
rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &val);
status |= val;
rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
status &= ~IRQ_PLL_LOCK; /* ignore */
status &= ~IRQ_RX_START; /* ignore */
......@@ -954,7 +1007,7 @@ static irqreturn_t at86rf230_isr_level(int irq, void *data)
static int at86rf230_hw_init(struct at86rf230_local *lp)
{
int rc, irq_pol, irq_type;
u8 dvdd;
unsigned int dvdd;
u8 csma_seed[2];
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF);
......@@ -1033,7 +1086,8 @@ static int at86rf230_probe(struct spi_device *spi)
struct ieee802154_dev *dev;
struct at86rf230_local *lp;
u16 man_id = 0;
u8 part = 0, version = 0, status;
u8 part = 0, version = 0;
unsigned int status;
irq_handler_t irq_handler;
work_func_t irq_worker;
int rc, irq_type;
......@@ -1128,6 +1182,14 @@ static int at86rf230_probe(struct spi_device *spi)
if (rc < 0)
goto free_dev;
lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
if (IS_ERR(lp->regmap)) {
rc = PTR_ERR(lp->regmap);
dev_err(&spi->dev, "Failed to allocate register map: %d\n",
rc);
goto free_dev;
}
irq_type = irq_get_trigger_type(spi->irq);
if (!irq_type)
irq_type = IRQF_TRIGGER_RISING;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment