Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "There are six new SoCs added this time.

  Apple M1 and Nuvoton WPCM450 have separate branches because they are
  new SoC families that require changes outside of device tree files.
  The other four are variations of already supported chips and get
  merged through this branch:

   - STMicroelectronics STM32H750 is one of many variants of STM32
     microcontrollers based on the Cortex-M7 core.

     This is particularly notable since we rarely add support for new
     MMU-less chips these days. In this case, the board that gets added
     along with the platform is not a SoC reference platform but the
     "Art Pi" (https://art-pi.gitee.io/website/) machine that was
     originally design for the RT-Thread RTOS.

   - NXP i.MX8QuadMax is a variant of the growing i.MX8
     embedded/industrial SoC family, using two Cortex-A72 and four
     Cortex-A53 cores.

     It gets added along with its reference board, the "NXP i.MX8QuadMax
     Multisensory Enablement Kit".

   - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
     7c) that is used in some Chromebooks and Windows laptops.

     Only a reference board is added for the moment.

   - TI AM64x Sita4ra is a new version of the K3 SoC family for
     industrial control, motor control, remote IO, IoT gateway etc.,
     similar to the older AM65x family.

     Two reference machines are added alongside.

  Among the newly added machines, there is a very clear skew towards
  64-bit machines now, with 12 32-bit machines compared to 23 64-bit
  machines. The full list sorted by SoC is:

   - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
   - Allwinner A10: Topwise A721 Tablet
   - Amlogic GXL: MeCool KII TV box
   - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
   - Broadcom BCM4908: TP-Link Archer C2300 V1 router
   - MStar SSD202D: M5Stack UnitV2 camera
   - Marvell Armada 38x: ATL-x530 ethernet switch
   - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
     CM3, Asus Detachable CM3
   - Mediatek MT8516/MT8183: OLogic Pumpkin Board
   - NXP i.MX7: reMarkable Tablet
   - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
   - Nuvoton NPCM730: Quanta GBS BMC
   - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
   - Qualcomm MSM8998: OnePlus 5/5T phones
   - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
   - Rockchip RK3399: NanoPi R4S board
   - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
     Starter Kit, Carrier, SOM
   - TI AM65: Siemens SIMATIC IOT2050 gateway

  There is notable work going into extending already supported machines
  and SoCs:

   - ASpeed AST2500
   - Allwinner A23, A83t, A31, A64, H6
   - Amlogic G12B
   - Broadcom BCM4908
   - Marvell Armada 7K/8K/CN91xx
   - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
   - NXP i.MX8Q, i.MX8MM, i.MX8MP
   - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
   - Renesas R-Car M3, V3U
   - Rockchip RK3328, RK3399
   - STEricsson U8500
   - STMicroelectronics STM32MP141
   - Samsung Exynos 4412
   - TI K3-AM65, K3-J7200
   - TI OMAP3

  Among the treewide cleanups and bug fixes, two parts stand out:

   - There are a number of cleanups for issues pointed out by 'make
     dtbs_check' this time, and I expect more to come in the future as
     we increasingly check for regressions.

   - After a change to the MMC subsystem that can lead to unpredictable
     device numbers, several platforms add 'aliases' properties for
     these to give each MMC controller a fixed number"

* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
  dt-bindings: mali-bifrost: add dma-coherent
  arm64: dts: amlogic: misc DT schema fixups
  arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
  arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
  arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
  ARM: dts: mstar: Add a dts for M5Stack UnitV2
  dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
  dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
  arm64: dts: mt8183: fix dtbs_check warning
  arm64: dts: mt8183-pumpkin: fix dtbs_check warning
  ARM: dts: aspeed: tiogapass: add hotplug controller
  ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
  ARM: dts: aspeed: Rainier: Update to pass 2 hardware
  ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
  ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
  ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
  ARM: dts: qcom: sdx55: add IPA information
  ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
  dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
  ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
  ...

Documentation/arm/index.rst

@@ -52,6 +52,7 @@ SoC-specific documents
    stm32/stm32f746-overview
    stm32/overview
    stm32/stm32h743-overview
+   stm32/stm32h750-overview
    stm32/stm32f769-overview
    stm32/stm32f429-overview
    stm32/stm32mp157-overview

Documentation/arm/stm32/stm32h750-overview.rst

+==================
+STM32H750 Overview
+==================
+
+Introduction
+------------
+
+The STM32H750 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @480MHz
+- 128K internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H750_).
+
+.. _STM32H750: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html
+
+:Authors: Dillon Min <dillon.minfei@gmail.com>
+

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -109,6 +109,7 @@ properties:
               - libretech,aml-s905d-pc
               - phicomm,n1
               - smartlabs,sml5442tw
+              - videostrong,gxl-kii-pro
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
 
@@ -120,8 +121,10 @@ properties:
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
+              - minix,neo-u9h
               - nexbox,a1
               - tronsmart,vega-s96
+              - videostrong,gxm-kiii-pro
               - wetek,core2
           - const: amlogic,s912
           - const: amlogic,meson-gxm

Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml

@@ -21,6 +21,7 @@ properties:
         items:
           - enum:
               - netgear,r8000p
+              - tplink,archer-c2300-v1
           - const: brcm,bcm4906
           - const: brcm,bcm4908
 

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -617,6 +617,7 @@ properties:
               - kam,imx7d-flex-concentrator       # Kamstrup OMNIA Flex Concentrator
               - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
+              - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
               - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
               - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
               - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
@@ -688,6 +689,14 @@ properties:
               - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
           - const: fsl,imx8mm
 
+      - description: Engicam i.Core MX8M Mini SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mm-ctouch2        # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+              - engicam,icore-mx8mm-edimm2.2       # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mm             # i.MX8MM Engicam i.Core MX8M Mini SoM
+          - const: fsl,imx8mm
+
       - description: Kontron BL i.MX8MM (N801X S) Board
         items:
           - const: kontron,imx8mm-n801x-s
@@ -733,6 +742,7 @@ properties:
               - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
               - google,imx8mq-phanbell    # Google Coral Edge TPU
+              - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
@@ -755,6 +765,12 @@ properties:
           - const: zii,imx8mq-ultra
           - const: fsl,imx8mq
 
+      - description: i.MX8QM based Boards
+        items:
+          - enum:
+              - fsl,imx8qm-mek           # i.MX8QM MEK Board
+          - const: fsl,imx8qm
+
       - description: i.MX8QXP based Boards
         items:
           - enum:

Documentation/devicetree/bindings/arm/mediatek.yaml

@@ -118,6 +118,10 @@ properties:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
       - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
         items:
           - enum:
@@ -125,6 +129,38 @@ properties:
               - google,krane-sku176
           - const: google,krane
           - const: mediatek,mt8183
+      - description: Google Damu (ASUS Chromebook Flip CM3)
+        items:
+          - const: google,damu
+          - const: mediatek,mt8183
+      - description: Google Juniper (Acer Chromebook Spin 311)
+        items:
+          - const: google,juniper-sku16
+          - const: google,juniper
+          - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3
+          - const: google,kakadu-rev2
+          - const: google,kakadu
+          - const: mediatek,mt8183
+      - description: Google Kodama (Lenovo 10e Chromebook Tablet)
+        items:
+          - enum:
+              - google,kodama-sku16
+              - google,kodama-sku272
+              - google,kodama-sku288
+              - google,kodama-sku32
+          - const: google,kodama
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8183-pumpkin
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8516-pumpkin
+          - const: mediatek,mt8516
 
 additionalProperties: true
 

Documentation/devicetree/bindings/arm/mstar/mstar.yaml

@@ -24,6 +24,7 @@ properties:
         items:
           - enum:
               - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
+              - m5stack,unitv2 # M5Stack UnitV2
           - const: mstar,infinity2m
 
       - description: infinity3 boards

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -37,6 +37,7 @@ description: |
         msm8994
         msm8996
         sc7180
+        sc7280
         sdm630
         sdm660
         sdm845
@@ -136,6 +137,16 @@ properties:
               - samsung,a5u-eur
           - const: qcom,msm8916
 
+      - items:
+          - enum:
+              - sony,karin_windy
+              - sony,karin-row
+              - sony,satsuki-row
+              - sony,sumire-row
+              - sony,suzuran-row
+              - qcom,msm8994
+          - const: qcom,apq8094
+
       - items:
           - const: qcom,msm8996-mtp
 
@@ -164,6 +175,11 @@ properties:
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
+      - items:
+          - enum:
+              - qcom,sc7280-idp
+          - const: qcom,sc7280
+
       - items:
           - enum:
               - xiaomi,lavender
@@ -172,10 +188,13 @@ properties:
       - items:
           - enum:
               - qcom,sdx55-mtp
+              - qcom,sdx55-telit-fn980-tlb
+              - qcom,sdx55-t55
           - const: qcom,sdx55
 
       - items:
           - enum:
+              - qcom,ipq6018-cp01
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
@@ -187,6 +206,7 @@ properties:
 
       - items:
           - enum:
+              - qcom,sm8350-hdk
               - qcom,sm8350-mtp
           - const: qcom,sm8350
 

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -134,6 +134,7 @@ properties:
               - friendlyarm,nanopi-m4
               - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
+              - friendlyarm,nanopi-r4s
           - const: rockchip,rk3399
 
       - description: GeekBuying GeekBox

Documentation/devicetree/bindings/arm/stm32/stm32.yaml

@@ -51,6 +51,10 @@ properties:
               - st,stm32h743i-disco
               - st,stm32h743i-eval
           - const: st,stm32h743
+      - items:
+          - enum:
+              - st,stm32h750i-art-pi
+          - const: st,stm32h750
       - items:
           - enum:
               - shiratech,stm32mp157a-iot-box # IoT Box
@@ -64,6 +68,23 @@ properties:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+
+      - description: Engicam i.Core STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
+          - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
+          - const: st,stm32mp157
+
+      - description: Engicam MicroGEA STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,microgea-stm32mp1-microdev2.0
+              - engicam,microgea-stm32mp1-microdev2.0-of7
+          - const: engicam,microgea-stm32mp1
+          - const: st,stm32mp157
+
       - description: Octavo OSD32MP15x System-in-Package based boards
         items:
           - enum:

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -802,6 +802,11 @@ properties:
           - const: tbs-biometrics,a711
           - const: allwinner,sun8i-a83t
 
+      - description: Topwise A721 Tablet
+        items:
+          - const: topwise,a721
+          - const: allwinner,sun4i-a10
+
       - description: Utoo P66
         items:
           - const: utoo,p66

Documentation/devicetree/bindings/arm/ti/k3.yaml

@@ -23,6 +23,8 @@ properties:
         items:
           - enum:
               - ti,am654-evm
+              - siemens,iot2050-basic
+              - siemens,iot2050-advanced
           - const: ti,am654
 
       - description: K3 J721E SoC
@@ -33,6 +35,13 @@ properties:
         items:
           - const: ti,j7200
 
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
 additionalProperties: true
 
 ...

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml

@@ -107,8 +107,8 @@ examples:
         interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
         reg = <0x5b010000 0x10000>;
         clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
-        clock-names = "ipg", "per", "ahb";
+                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "ipg", "ahb", "per";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -22,6 +22,7 @@ Required properties:
  * "qcom,scm-sc7180"
  * "qcom,scm-sc7280"
  * "qcom,scm-sdm845"
+ * "qcom,scm-sdx55"
  * "qcom,scm-sm8150"
  * "qcom,scm-sm8250"
  * "qcom,scm-sm8350"

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -69,6 +69,8 @@ properties:
 
       where voltage is in V, frequency is in MHz.
 
+  dma-coherent: true
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/mailbox/fsl,mu.yaml

@@ -34,12 +34,15 @@ properties:
               - fsl,imx8mm-mu
               - fsl,imx8mn-mu
               - fsl,imx8mp-mu
+              - fsl,imx8qm-mu
               - fsl,imx8qxp-mu
           - const: fsl,imx6sx-mu
       - description: To communicate with i.MX8 SCU with fast IPC
         items:
           - const: fsl,imx8-mu-scu
-          - const: fsl,imx8qxp-mu
+          - enum:
+              - fsl,imx8qm-mu
+              - fsl,imx8qxp-mu
           - const: fsl,imx6sx-mu
 
   reg:

Documentation/devicetree/bindings/media/rc.yaml

@@ -90,9 +90,12 @@ properties:
       - rc-leadtek-y04g0051
       - rc-lme2510
       - rc-manli
+      - rc-mecool-kii-pro
+      - rc-mecool-kiii-pro
       - rc-medion-x10
       - rc-medion-x10-digitainer
       - rc-medion-x10-or2x
+      - rc-minix-neo
       - rc-msi-digivox-ii
       - rc-msi-digivox-iii
       - rc-msi-tvanywhere
@@ -145,6 +148,7 @@ properties:
       - rc-videomate-s350
       - rc-videomate-tv-pvr
       - rc-videostrong-kii-pro
+      - rc-vega-s9x
       - rc-wetek-hub
       - rc-wetek-play2
       - rc-winfast

Documentation/devicetree/bindings/nvmem/mtk-efuse.txt

@@ -7,6 +7,7 @@ Required properties:
 	      "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622
 	      "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
 	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
+	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
 	      "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
 	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
 - reg: Should contain registers location and length

Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt

@@ -54,6 +54,7 @@ For Tegra210:
 - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
 - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
 - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
+- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node.
 
 For Tegra186:
 - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY

Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt

@@ -23,6 +23,7 @@ Required properties:
 	For those SoCs that use SYST
 	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
 	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
+	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
 	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
 	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
 

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -651,6 +651,8 @@ patternProperties:
     description: Liebherr-Werk Nenzing GmbH
   "^lxa,.*":
     description: Linux Automation GmbH
+  "^m5stack,.*":
+    description: M5Stack
   "^macnica,.*":
     description: Macnica Americas
   "^mantix,.*":
@@ -932,6 +934,8 @@ patternProperties:
     description: Unisoc Communications, Inc.
   "^realtek,.*":
     description: Realtek Semiconductor Corp.
+  "^remarkable,.*":
+    description: reMarkable AS
   "^renesas,.*":
     description: Renesas Electronics Corporation
   "^rex,.*":
@@ -1024,6 +1028,8 @@ patternProperties:
     description: Silex Insight
   "^siliconmitus,.*":
     description: Silicon Mitus, Inc.
+  "^siemens,.*":
+    description: Siemens AG
   "^simtek,.*":
     description: Cypress Semiconductor Corporation (Simtek Corporation)
   "^sinlinx,.*":

arch/arm/boot/dts/Makefile

@@ -335,6 +335,7 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \
 	lpc3250-phy3250.dtb
 dtb-$(CONFIG_ARCH_NPCM7XX) += \
 	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
 	nuvoton-npcm730-kudo.dtb \
 	nuvoton-npcm750-evb.dtb \
 	nuvoton-npcm750-runbmc-olympus.dtb
@@ -660,6 +661,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-pico-hobbit.dtb \
 	imx7d-pico-nymph.dtb \
 	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
 	imx7d-sdb-reva.dtb \
@@ -929,7 +931,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-castor.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx55-t55.dtb \
+	qcom-sdx55-telit-fn980-tlb.dtb
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
@@ -1071,11 +1075,16 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32h750i-art-pi.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dhcor-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
 	stm32mp157a-iot-box.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
 	stm32mp157a-stinger96.dtb \
 	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dhcom-picoitx.dtb \
@@ -1105,7 +1114,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb \
 	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
@@ -1337,6 +1347,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb\
 	armada-385-clearfog-gtr-s4.dtb \
 	armada-385-clearfog-gtr-l8.dtb \
 	armada-385-db-88f6820-amc.dtb \
@@ -1397,6 +1408,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_MSTARV7) += \
 	mstar-infinity-msc313-breadbee_crust.dtb \
 	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
+	mstar-infinity2m-ssd202d-unitv2.dtb \
 	mstar-infinity3-msc313e-breadbee.dtb \
 	mstar-mercury5-ssc8336n-midrived08.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
@@ -1406,6 +1418,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ampere-mtjade.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
@@ -1418,6 +1431,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-yosemitev2.dtb \
 	aspeed-bmc-ibm-everest.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
 	aspeed-bmc-ibm-rainier-4u.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \

arch/arm/boot/dts/am335x-boneblack.dts

@@ -26,54 +26,54 @@ oppnitro-1000000000 {
 
 &gpio0 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
+		"[mdio_data]",
+		"[mdio_clk]",
 		"P9_22 [spi0_sclk]",
 		"P9_21 [spi0_d0]",
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
-		"[sd card]",
-		"P9_42A [ecappwm0]",
-		"P8_35 [hdmi]",
-		"P8_33 [hdmi]",
-		"P8_31 [hdmi]",
-		"P8_32 [hdmi]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
 		"P9_20 [i2c2_sda]",
 		"P9_19 [i2c2_scl]",
 		"P9_26 [uart1_rxd]",
 		"P9_24 [uart1_txd]",
-		"[ethernet]",
-		"[ethernet]",
-		"[usb]",
-		"[hdmi]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
 		"P9_41B",
-		"[ethernet]",
+		"[rmii1_txd1]",
 		"P8_19 [ehrpwm2a]",
 		"P8_13 [ehrpwm2b]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P8_14",
 		"P8_17",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
 		"P9_11 [uart4_rxd]",
 		"P9_13 [uart4_txd]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"P8_25 [emmc]",
-		"[emmc]",
-		"P8_5 [emmc]",
-		"P8_6 [emmc]",
-		"P8_23 [emmc]",
-		"P8_22 [emmc]",
-		"P8_3 [emmc]",
-		"P8_4 [emmc]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P8_12",
 		"P8_11",
 		"P8_16",
@@ -82,13 +82,13 @@ &gpio1 {
 		"P9_23",
 		"P9_14 [ehrpwm1a]",
 		"P9_16 [ehrpwm1b]",
-		"[emmc]",
+		"[emmc rst]",
 		"[usr0 led]",
 		"[usr1 led]",
 		"[usr2 led]",
 		"[usr3 led]",
-		"[hdmi]",
-		"[usb]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
 		"[hdmi audio]",
 		"P9_12",
 		"P8_26",
@@ -116,38 +116,38 @@ &gpio2 {
 		"P8_38 [hdmi]",
 		"P8_36 [hdmi]",
 		"P8_34 [hdmi]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
 		"P8_27 [hdmi]",
 		"P8_29 [hdmi]",
 		"P8_28 [hdmi]",
 		"P8_30 [hdmi]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]";
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
 };
 
 &gpio3 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[i2c0]",
-		"[i2c0]",
-		"[emu]",
-		"[emu]",
-		"[ethernet]",
-		"[ethernet]",
-		"[NC]",
-		"[NC]",
-		"[usb]",
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
 		"P9_31 [spi1_sclk]",
 		"P9_29 [spi1_d0]",
 		"P9_30 [spi1_d1]",
@@ -156,14 +156,14 @@ &gpio3 {
 		"P9_27",
 		"P9_41A",
 		"P9_25",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };

arch/arm/boot/dts/am335x-pocketbeagle.dts

@@ -61,51 +61,51 @@ vmmcsd_fixed: fixedregulator0 {
 
 &gpio0 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.08 [SPI0_CLK]",
 		"P1.10 [SPI0_MISO]",
 		"P1.12 [SPI0_MOSI]",
 		"P1.06 [SPI0_CS]",
 		"[MMC0_CD]",
 		"P2.29 [SPI1_CLK]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
+		"[SYSBOOT 12]",
+		"[SYSBOOT 13]",
+		"[SYSBOOT 14]",
+		"[SYSBOOT 15]",
 		"P1.26 [I2C2_SDA]",
 		"P1.28 [I2C2_SCL]",
 		"P2.11 [I2C1_SDA]",
 		"P2.09 [I2C1_SCL]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"P2.31 [SPI1_CS]",
 		"P1.20 [PRU0.16]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.03",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.34",
 		"P2.19",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.05 [UART4_RX]",
 		"P2.07 [UART4_TX]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.25 [SPI1_MOSI]",
 		"P1.32 [UART0_RX]",
 		"P1.30 [UART0_TX]",
@@ -113,10 +113,10 @@ &gpio1 {
 		"P2.33",
 		"P2.22",
 		"P2.18",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.01 [PWM1A]",
-		"[NC]",
+		"NC",
 		"P2.10",
 		"[USR LED 0]",
 		"[USR LED 1]",
@@ -126,35 +126,35 @@ &gpio1 {
 		"P2.04",
 		"P2.02",
 		"P2.08",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC";
 };
 
 &gpio2 {
 	gpio-line-names =
 		"P2.20",
 		"P2.17",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"[EEPROM_WP]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[SYSBOOT 0]",
+		"[SYSBOOT 1]",
+		"[SYSBOOT 2]",
+		"[SYSBOOT 3]",
+		"[SYSBOOT 4]",
+		"[SYSBOOT 5]",
+		"[SYSBOOT 6]",
+		"[SYSBOOT 7]",
+		"[SYSBOOT 8]",
+		"[SYSBOOT 9]",
+		"[SYSBOOT 10]",
+		"[SYSBOOT 11]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.35 [AIN5]",
 		"P1.02 [AIN6]",
 		"P1.35 [PRU1.10]",
@@ -169,19 +169,19 @@ &gpio2 {
 
 &gpio3 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"[I2C0_SDA]",
 		"[I2C0_SCL]",
-		"[JTAG]",
-		"[JTAG]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[JTAG EMU0]",
+		"[JTAG EMU1]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P1.03 [USB1]",
 		"P1.36 [PWM0A]",
 		"P1.33 [PRU0.1]",
@@ -191,16 +191,16 @@ &gpio3 {
 		"P2.34 [PRU0.5]",
 		"P2.28 [PRU0.6]",
 		"P1.29 [PRU0.7]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };
 
 &am33xx_pinmux {

arch/arm/boot/dts/armada-385-atl-x530.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
+ (x530/AT-GS980MX)
+ *
+ Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "x530/AT-GS980MX";
+	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <400000>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&pinctrl {
+	i2c0_gpio_pins: i2c-gpio-pins-0 {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+	i2c0mux: mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adt7476_2e: hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			adt7476_2d: hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@u-boot {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@u-boot-env {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+			partition@unused {
+				reg = <0x00140000 0x00e80000>;
+				label = "unused";
+			};
+			partition@idprom {
+				reg = <0x00fc0000 0x00040000>;
+				label = "idprom";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		marvell,nand-enable-arbiter;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@user {
+				reg = <0x00000000 0x0f000000>;
+				label = "user";
+			};
+			partition@errlog {
+				/* Maximum mtdoops size is 8MB, so set to that. */
+				reg = <0x0f000000 0x00800000>;
+				label = "errlog";
+			};
+			partition@nand-bbt {
+				reg = <0x0f800000 0x00800000>;
+				label = "nand-bbt";
+			};
+		};
+	};
+};
+

arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts

@@ -151,6 +151,31 @@ &i2c1 {
 	status = "okay";
 };
 
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
 // Thermal Sensors
 &i2c7 {
 	status = "okay";
@@ -196,6 +221,11 @@ lm75a@4f {
 	};
 };
 
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
 &kcs1 {
 	status = "okay";
 	aspeed,lpc-io-reg = <0x60>;

arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts

+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,sirq-active-high;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};

arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts

@@ -507,6 +507,11 @@ eeprom@54 {
 &i2c7 {
 	status = "okay";
 	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
 };
 
 &i2c8 {

arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts

+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};

arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts

@@ -22,16 +22,30 @@ power-supply@6b {
 
 &fan0 {
 	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
 };
 
 &fan1 {
 	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
 };
 
 &fan2 {
 	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
 };
 
 &fan3 {
 	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
+};
+
+&fan4 {
+	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
+};
+
+&fan5 {
+	tach-pulses = <4>;
+	/delete-property/ maxim,fan-dual-tach;
 };

arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts

@@ -383,6 +383,39 @@ fan@11 {
 	};
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
+	/*F0-F7*/	"","id-button","","","","","air-water","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
+	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {

arch/arm/boot/dts/at91-sam9x60ek.dts

@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,7 +85,7 @@ gpio_keys {
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -466,7 +467,7 @@ gpio_keys {
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts

@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@ gpio_keys {
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_icp.dts

@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@ gpio_keys {
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts

@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -402,7 +403,7 @@ gpio_keys {
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -712,7 +713,7 @@ gpio_keys {
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -354,7 +355,7 @@ gpio_keys {
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91sam9260ek.dts

@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@ btn3 {
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -234,7 +235,7 @@ btn3 {
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {

arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts

@@ -21,6 +21,11 @@ memory@0 {
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -22,8 +22,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {

arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts

@@ -21,6 +21,11 @@ memory@0 {
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 

arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4709-linksys-ea9200.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
 	};
 
 	gpio-keys {

arch/arm/boot/dts/bcm4709-netgear-r7000.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm4709-netgear-r8000.dts

@@ -32,8 +32,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -21,8 +21,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
 	};
 
 	gpio-keys {
@@ -70,6 +75,7 @@ usb3 {
 		power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
 		};
 
 		wifi-disabled {
@@ -274,7 +280,7 @@ &usb3_phy {
 
 &nandcs {
 	partitions {
-		compatible = "fixed-partitions";
+		compatible = "linksys,ns-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -295,20 +301,18 @@ partition@180000{
 		};
 
 		partition@200000 {
-			label = "firmware";
-			reg = <0x0200000 0x01D00000>;
-			compatible = "brcm,trx";
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
-		partition@1F00000 {
-			label = "failsafe";
-			reg = <0x01F00000 0x01D00000>;
-			read-only;
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
 		partition@5200000 {
 			label = "system";
-			reg = <0x05200000 0x02E00000>;
+			reg = <0x05200000 0x02e00000>;
 		};
 	};
 };

arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts

@@ -18,8 +18,8 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts

@@ -18,8 +18,13 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-netgear-r8500.dts

@@ -18,8 +18,8 @@ chosen {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {

arch/arm/boot/dts/bcm47094-phicomm-k3.dts

@@ -15,8 +15,8 @@ / {
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {

arch/arm/boot/dts/ep7209.dtsi

@@ -10,6 +10,8 @@ / {
 	model = "Cirrus Logic EP7209";
 	compatible = "cirrus,ep7209";
 
+	chosen { };
+
 	aliases {
 		gpio0 = &porta;
 		gpio1 = &portb;
@@ -108,6 +110,7 @@ fb: fb@800002c0 {
 			compatible = "cirrus,ep7209-fb";
 			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
 			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
 			status = "disabled";
 		};
 
@@ -132,7 +135,7 @@ pwm: pwm@80000400 {
 			#pwm-cells = <1>;
 		};
 
-		uart1: uart@80000480 {
+		uart1: serial@80000480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80000480 0x80>;
 			interrupts = <12 13>;
@@ -147,6 +150,7 @@ spi: spi@80000500 {
 			reg = <0x80000500 0x4>;
 			interrupts = <15>;
 			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -155,7 +159,7 @@ syscon2: syscon@80001100 {
 			reg = <0x80001100 0x80>;
 		};
 
-		uart2: uart@80001480 {
+		uart2: serial@80001480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80001480 0x80>;
 			interrupts = <28 29>;
@@ -170,6 +174,7 @@ dai: dai@80002000 {
 			clocks = <&clks CLPS711X_CLK_PLL>;
 			clock-names = "pll";
 			interrupts = <32>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -179,8 +184,17 @@ syscon3: syscon@80002200 {
 		};
 	};
 
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
 	mctrl: mctrl {
 		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

arch/arm/boot/dts/ep7211-edb7211.dts

@@ -7,7 +7,7 @@ / {
 	model = "Cirrus Logic EP7211 Development Board";
 	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
 
-	memory {
+	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x02000000>;
 	};

arch/arm/boot/dts/exynos3250-monk.dts

@@ -142,7 +142,7 @@ &adc {
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -150,7 +150,7 @@ thermistor-ap {
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -142,7 +142,7 @@ &adc {
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -150,7 +150,7 @@ thermistor-ap {
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;

arch/arm/boot/dts/exynos4210-i9100.dts

@@ -136,7 +136,7 @@ battery@36 {
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
@@ -147,6 +147,36 @@ battery@36 {
 		};
 	};
 
+	i2c_s5k5baf: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		image-sensor@2d {
+			compatible = "samsung,s5k5baf";
+			reg = <0x2d>;
+			vdda-supply = <&cam_io_en_reg>;
+			vddreg-supply = <&vt_core_15v_reg>;
+			vddio-supply = <&vtcam_reg>;
+			clocks = <&camera 0>;
+			clock-names = "mclk";
+			stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+			rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+			clock-frequency = <24000000>;
+
+			port {
+				s5k5bafx_ep: endpoint {
+					remote-endpoint = <&csis1_ep>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -220,7 +250,29 @@ pmic_ap_clk: pmic-ap-clk {
 };
 
 &camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
 	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
+};
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	clock-frequency = <160000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&s5k5bafx_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <6>;
+		};
+	};
 };
 
 &cpu0 {
@@ -384,6 +436,8 @@ pmic@66 {
 		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
 		pinctrl-names = "default";
 
+		charger-supply = <&charger_reg>;
+
 		regulators {
 			vadc_reg: LDO1 {
 				regulator-name = "VADC_3.3V_C210";