Commit f7917c00 authored by Jeff Kirsher's avatar Jeff Kirsher

chelsio: Move the Chelsio drivers

Moves the drivers for the Chelsio chipsets into
drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile
changes.

CC: Divy Le Ray <divy@chelsio.com>
CC: Dimitris Michailidis <dm@chelsio.com>
CC: Casey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent adfc5217
......@@ -1994,7 +1994,7 @@ M: Divy Le Ray <divy@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb3/
F: drivers/net/ethernet/chelsio/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
M: Steve Wise <swise@chelsio.com>
......@@ -2008,7 +2008,7 @@ M: Dimitris Michailidis <dm@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb4/
F: drivers/net/ethernet/chelsio/cxgb4/
CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
M: Steve Wise <swise@chelsio.com>
......@@ -2022,7 +2022,7 @@ M: Casey Leedom <leedom@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb4vf/
F: drivers/net/ethernet/chelsio/cxgb4vf/
STMMAC ETHERNET DRIVER
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
......
ccflags-y := -Idrivers/net/cxgb3
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
......
ccflags-y := -Idrivers/net/cxgb4
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o
......
......@@ -1942,92 +1942,6 @@ if NETDEV_10000
config MDIO
tristate
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
select MDIO
help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb.
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
help
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI && INET
select FW_LOADER
select MDIO
help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb3.
config CHELSIO_T4
tristate "Chelsio Communications T4 Ethernet support"
depends on PCI
select FW_LOADER
select MDIO
help
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4.
config CHELSIO_T4VF
tristate "Chelsio Communications T4 Virtual Function Ethernet support"
depends on PCI
help
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters with PCI-E SR-IOV Virtual Functions.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4vf.
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
......
......@@ -19,10 +19,6 @@ obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGBEVF) += ixgbevf/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
......
......@@ -15,5 +15,6 @@ source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
endif # ETHERNET
......@@ -6,3 +6,4 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
#
# Chelsio device configuration
#
config NET_VENDOR_CHELSIO
bool "Chelsio devices"
depends on PCI || INET
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Chelsio devices. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_CHELSIO
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
select MDIO
---help---
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb.
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
---help---
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI && INET
select FW_LOADER
select MDIO
---help---
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb3.
config CHELSIO_T4
tristate "Chelsio Communications T4 Ethernet support"
depends on PCI
select FW_LOADER
select MDIO
---help---
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4.
config CHELSIO_T4VF
tristate "Chelsio Communications T4 Virtual Function Ethernet support"
depends on PCI
---help---
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters with PCI-E SR-IOV Virtual Functions.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module choose M here; the module
will be called cxgb4vf.
endif # NET_VENDOR_CHELSIO
#
# Makefile for the Chelsio network device drivers.
#
obj-$(CONFIG_CHELSIO_T1) += cxgb/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb4
EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += cxgb4i.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment