Commit f7b6bf20 authored by Abhinav Kumar's avatar Abhinav Kumar Committed by Rob Clark

drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY

Currently the DSI PHY timings are hard-coded for a specific panel
for the 10nm PHY.

Replace this with the auto PHY timing calculator which can calculate
the PHY timings for any panel.

Changes in v4:
- None

Changes in v3:
- None

Changes in v2:
- None
Reviewed-by: default avatarSean Paul <seanpaul@chromium.org>
Reviewed-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarAbhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent 9c5638d7
...@@ -265,6 +265,115 @@ int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, ...@@ -265,6 +265,115 @@ int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
return 0; return 0;
} }
int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req)
{
const unsigned long bit_rate = clk_req->bitclk_rate;
const unsigned long esc_rate = clk_req->escclk_rate;
s32 ui, ui_x8, lpx;
s32 tmax, tmin;
s32 pcnt0 = 50;
s32 pcnt1 = 50;
s32 pcnt2 = 10;
s32 pcnt3 = 30;
s32 pcnt4 = 10;
s32 pcnt5 = 2;
s32 coeff = 1000; /* Precision, should avoid overflow */
s32 hb_en, hb_en_ckln;
s32 temp;
if (!bit_rate || !esc_rate)
return -EINVAL;
timing->hs_halfbyte_en = 0;
hb_en = 0;
timing->hs_halfbyte_en_ckln = 0;
hb_en_ckln = 0;
ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
ui_x8 = ui << 3;
lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
tmin = max_t(s32, temp, 0);
temp = (95 * coeff) / ui_x8;
tmax = max_t(s32, temp, 0);
timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
tmax = (tmin > 255) ? 511 : 255;
timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = (temp + 3 * ui) / ui_x8;
timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
tmin = max_t(s32, temp, 0);
temp = (85 * coeff + 6 * ui) / ui_x8;
tmax = max_t(s32, temp, 0);
timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
tmax = 255;
timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = (temp / ui_x8) - 1;
timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
tmax = 255;
timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
temp = 60 * coeff + 52 * ui - 43 * ui;
tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
tmax = 63;
timing->shared_timings.clk_post =
linear_inter(tmax, tmin, pcnt2, 0, false);
temp = 8 * ui + (timing->clk_prepare << 3) * ui;
temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
(((timing->hs_rqst_ckln << 3) + 8) * ui);
tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
tmax = 63;
if (tmin > tmax) {
temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
timing->shared_timings.clk_pre = temp >> 1;
timing->shared_timings.clk_pre_inc_by_2 = 1;
} else {
timing->shared_timings.clk_pre =
linear_inter(tmax, tmin, pcnt2, 0, false);
timing->shared_timings.clk_pre_inc_by_2 = 0;
}
timing->ta_go = 3;
timing->ta_sure = 0;
timing->ta_get = 4;
DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
timing->clk_trail, timing->clk_prepare, timing->hs_exit,
timing->hs_zero, timing->hs_prepare, timing->hs_trail,
timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
timing->hs_prep_dly_ckln);
return 0;
}
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg, void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask) u32 bit_mask)
{ {
......
...@@ -101,6 +101,8 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, ...@@ -101,6 +101,8 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req); struct msm_dsi_phy_clk_request *clk_req);
int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req); struct msm_dsi_phy_clk_request *clk_req);
int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req);
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg, void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask); u32 bit_mask);
int msm_dsi_phy_init_common(struct msm_dsi_phy *phy); int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
......
...@@ -79,34 +79,6 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy) ...@@ -79,34 +79,6 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04); dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
} }
static int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req)
{
/*
* TODO: These params need to be computed, they're currently hardcoded
* for a 1440x2560@60Hz panel with a byteclk of 100.618 Mhz, and a
* default escape clock of 19.2 Mhz.
*/
timing->hs_halfbyte_en = 0;
timing->clk_zero = 0x1c;
timing->clk_prepare = 0x07;
timing->clk_trail = 0x07;
timing->hs_exit = 0x23;
timing->hs_zero = 0x21;
timing->hs_prepare = 0x07;
timing->hs_trail = 0x07;
timing->hs_rqst = 0x05;
timing->ta_sure = 0x00;
timing->ta_go = 0x03;
timing->ta_get = 0x04;
timing->shared_timings.clk_pre = 0x2d;
timing->shared_timings.clk_post = 0x0d;
return 0;
}
static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
struct msm_dsi_phy_clk_request *clk_req) struct msm_dsi_phy_clk_request *clk_req)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment