Merge branch 'net-dsa-microchip-add-mtu-support-for-ksz8-series'

Oleksij Rempel says:

====================
net: dsa: microchip: add MTU support for KSZ8 series
====================

Link: https://lore.kernel.org/r/20221205052232.2834166-1-o.rempel@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/dsa/microchip/ksz8.h

@@ -57,5 +57,6 @@ int ksz8_reset_switch(struct ksz_device *dev);
 int ksz8_switch_detect(struct ksz_device *dev);
 int ksz8_switch_init(struct ksz_device *dev);
 void ksz8_switch_exit(struct ksz_device *dev);
+int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
 
 #endif

drivers/net/dsa/microchip/ksz8795.c

@@ -76,6 +76,57 @@ int ksz8_reset_switch(struct ksz_device *dev)
 	return 0;
 }
 
+static int ksz8863_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl2 = 0;
+
+	if (frame_size <= KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_LEGAL_PACKET_ENABLE;
+	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_HUGE_PACKET_ENABLE;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, KSZ8863_LEGAL_PACKET_ENABLE |
+			KSZ8863_HUGE_PACKET_ENABLE, ctrl2);
+}
+
+static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl1 = 0, ctrl2 = 0;
+	int ret;
+
+	if (frame_size > KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= SW_LEGAL_PACKET_DISABLE;
+	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl1 |= SW_HUGE_PACKET;
+
+	ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1);
+	if (ret)
+		return ret;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, ctrl2);
+}
+
+int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
+{
+	u16 frame_size;
+
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
+
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	switch (dev->chip_id) {
+	case KSZ8795_CHIP_ID:
+	case KSZ8794_CHIP_ID:
+	case KSZ8765_CHIP_ID:
+		return ksz8795_change_mtu(dev, frame_size);
+	case KSZ8830_CHIP_ID:
+		return ksz8863_change_mtu(dev, frame_size);
+	}
+
+	return -EOPNOTSUPP;
+}
+
 static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
 {
 	u8 hi, lo;
@@ -1233,8 +1284,6 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
 	masks = dev->info->masks;
 	regs = dev->info->regs;
 
-	/* Switch marks the maximum frame with extra byte as oversize. */
-	ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
 	ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
 
 	p = &dev->ports[dev->cpu_port];
@@ -1308,6 +1357,18 @@ int ksz8_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int i;
 
+	ds->mtu_enforcement_ingress = true;
+
+	/* We rely on software untagging on the CPU port, so that we
+	 * can support both tagged and untagged VLANs
+	 */
+	ds->untag_bridge_pvid = true;
+
+	/* VLAN filtering is partly controlled by the global VLAN
+	 * Enable flag
+	 */
+	ds->vlan_filtering_is_global = true;
+
 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
 
 	/* Enable automatic fast aging when link changed detected. */
@@ -1367,16 +1428,6 @@ int ksz8_switch_init(struct ksz_device *dev)
 	dev->phy_port_cnt = dev->info->port_cnt - 1;
 	dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports;
 
-	/* We rely on software untagging on the CPU port, so that we
-	 * can support both tagged and untagged VLANs
-	 */
-	dev->ds->untag_bridge_pvid = true;
-
-	/* VLAN filtering is partly controlled by the global VLAN
-	 * Enable flag
-	 */
-	dev->ds->vlan_filtering_is_global = true;
-
 	return 0;
 }
 

drivers/net/dsa/microchip/ksz8795_reg.h

@@ -48,6 +48,9 @@
 #define NO_EXC_COLLISION_DROP		BIT(3)
 #define SW_LEGAL_PACKET_DISABLE		BIT(1)
 
+#define KSZ8863_HUGE_PACKET_ENABLE	BIT(2)
+#define KSZ8863_LEGAL_PACKET_ENABLE	BIT(1)
+
 #define REG_SW_CTRL_3			0x05
  #define WEIGHTED_FAIR_QUEUE_ENABLE	BIT(3)
 

drivers/net/dsa/microchip/ksz9477.c

@@ -45,24 +45,15 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
 
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
 {
-	u16 frame_size, max_frame = 0;
-	int i;
-
-	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+	u16 frame_size;
 
-	/* Cache the per-port MTU setting */
-	dev->ports[port].max_frame = frame_size;
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
 
-	for (i = 0; i < dev->info->port_cnt; i++)
-		max_frame = max(max_frame, dev->ports[i].max_frame);
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
 	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
-				  REG_SW_MTU_MASK, max_frame);
-}
-
-int ksz9477_max_mtu(struct ksz_device *dev, int port)
-{
-	return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+				  REG_SW_MTU_MASK, frame_size);
 }
 
 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
@@ -1143,6 +1134,8 @@ int ksz9477_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int ret = 0;
 
+	ds->mtu_enforcement_ingress = true;
+
 	/* Required for port partitioning. */
 	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
 		      true);

drivers/net/dsa/microchip/ksz9477.h

@@ -50,7 +50,6 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port,
 int ksz9477_mdb_del(struct ksz_device *dev, int port,
 		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu);
-int ksz9477_max_mtu(struct ksz_device *dev, int port);
 void ksz9477_config_cpu_port(struct dsa_switch *ds);
 int ksz9477_enable_stp_addr(struct ksz_device *dev);
 int ksz9477_reset_switch(struct ksz_device *dev);

drivers/net/dsa/microchip/ksz9477_reg.h

@@ -1615,6 +1615,4 @@
 #define PTP_TRIG_UNIT_M			(BIT(MAX_TRIG_UNIT) - 1)
 #define PTP_TS_UNIT_M			(BIT(MAX_TIMESTAMP_UNIT) - 1)
 
-#define KSZ9477_MAX_FRAME_SIZE		9000
-
 #endif /* KSZ9477_REGS_H */

drivers/net/dsa/microchip/ksz_common.c

@@ -14,6 +14,7 @@
 #include <linux/phy.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_mdio.h>
@@ -171,6 +172,7 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.reset = ksz8_reset_switch,
 	.init = ksz8_switch_init,
 	.exit = ksz8_switch_exit,
+	.change_mtu = ksz8_change_mtu,
 };
 
 static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
@@ -206,7 +208,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
-	.max_mtu = ksz9477_max_mtu,
 	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = ksz9477_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -243,7 +244,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
-	.max_mtu = ksz9477_max_mtu,
 	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -2500,10 +2500,29 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
 {
 	struct ksz_device *dev = ds->priv;
 
-	if (!dev->dev_ops->max_mtu)
-		return -EOPNOTSUPP;
+	switch (dev->chip_id) {
+	case KSZ8795_CHIP_ID:
+	case KSZ8794_CHIP_ID:
+	case KSZ8765_CHIP_ID:
+		return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	case KSZ8830_CHIP_ID:
+		return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+	case LAN9370_CHIP_ID:
+	case LAN9371_CHIP_ID:
+	case LAN9372_CHIP_ID:
+	case LAN9373_CHIP_ID:
+	case LAN9374_CHIP_ID:
+		return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	}
 
-	return dev->dev_ops->max_mtu(dev, port);
+	return -EOPNOTSUPP;
 }
 
 static void ksz_set_xmii(struct ksz_device *dev, int port,

drivers/net/dsa/microchip/ksz_common.h

@@ -95,7 +95,6 @@ struct ksz_port {
 
 	struct ksz_port_mib mib;
 	phy_interface_t interface;
-	u16 max_frame;
 	u32 rgmii_tx_val;
 	u32 rgmii_rx_val;
 	struct ksz_device *ksz_dev;
@@ -322,7 +321,6 @@ struct ksz_dev_ops {
 	void (*get_caps)(struct ksz_device *dev, int port,
 			 struct phylink_config *config);
 	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
-	int (*max_mtu)(struct ksz_device *dev, int port);
 	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
 	void (*phylink_mac_config)(struct ksz_device *dev, int port,
@@ -456,6 +454,11 @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
 	return regmap_bulk_write(dev->regmap[2], reg, val, 2);
 }
 
+static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
+{
+	return regmap_update_bits(dev->regmap[0], offset, mask, val);
+}
+
 static inline int ksz_pread8(struct ksz_device *dev, int port, int offset,
 			     u8 *data)
 {
@@ -588,6 +591,12 @@ static inline int is_lan937x(struct ksz_device *dev)
 
 #define PORT_SRC_PHY_INT		1
 
+#define KSZ8795_HUGE_PACKET_SIZE	2000
+#define KSZ8863_HUGE_PACKET_SIZE	1916
+#define KSZ8863_NORMAL_PACKET_SIZE	1536
+#define KSZ8_LEGAL_PACKET_SIZE		1518
+#define KSZ9477_MAX_FRAME_SIZE		9000
+
 /* Regmap tables generation */
 #define KSZ_SPI_OP_RD		3
 #define KSZ_SPI_OP_WR		2