scsi: megaraid_sas: NVMe passthrough command support

NVMe passthrough via MFI interface. Current MegaRAID product supports
different types of encapsulation via the MFI framework.

NVMe native command should be framed by application and it should be
embedded in MFI as payload. The driver will provide interface to send
the MFI frame along with the payload (in this case, payload is NVMe
native command) to the firmware. Driver already has an existing, similar
interface for SATA and SMP passthrough.

1. Driver will pass MFI command to the firmware if the latter supports
   NVMe encapsulated processing (not all SAS3.5 firmware supports this
   feature).

2. Driver exposes sysfs entry support_nvme_encapsulation. This is
   required for backward compatibility for applications using earlier
   driver versions that did not process IOCTL frames and could result in
   host hang.

   This is already fixed as part of commit 82add4e1 ("scsi:
   megaraid_sas: Incorrect processing of IOCTL frames for SMP/STP
   commands")

[mkp: clarified commit message]
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/megaraid/megaraid_sas.h

@@ -197,6 +197,7 @@ enum MFI_CMD_OP {
 	MFI_CMD_ABORT		= 0x6,
 	MFI_CMD_SMP		= 0x7,
 	MFI_CMD_STP		= 0x8,
+	MFI_CMD_NVME		= 0x9,
 	MFI_CMD_OP_COUNT,
 	MFI_CMD_INVALID		= 0xff
 };
@@ -1352,7 +1353,13 @@ struct megasas_ctrl_info {
 
 	struct {
 	#if defined(__BIG_ENDIAN_BITFIELD)
-		u16 reserved:8;
+		u16 reserved:2;
+		u16 support_nvme_passthru:1;
+		u16 support_pl_debug_info:1;
+		u16 support_flash_comp_info:1;
+		u16 support_host_info:1;
+		u16 support_dual_fw_update:1;
+		u16 support_ssc_rev3:1;
 		u16 fw_swaps_bbu_vpd_info:1;
 		u16 support_pd_map_target_id:1;
 		u16 support_ses_ctrl_in_multipathcfg:1;
@@ -1377,7 +1384,19 @@ struct megasas_ctrl_info {
 		 *  provide the data in little endian order
 		 */
 		u16 fw_swaps_bbu_vpd_info:1;
-		u16 reserved:8;
+		u16 support_ssc_rev3:1;
+		/* FW supports CacheCade 3.0, only one SSCD creation allowed */
+		u16 support_dual_fw_update:1;
+		/* FW supports dual firmware update feature */
+		u16 support_host_info:1;
+		/* FW supports MR_DCMD_CTRL_HOST_INFO_SET/GET */
+		u16 support_flash_comp_info:1;
+		/* FW supports MR_DCMD_CTRL_FLASH_COMP_INFO_GET */
+		u16 support_pl_debug_info:1;
+		/* FW supports retrieval of PL debug information through apps */
+		u16 support_nvme_passthru:1;
+		/* FW supports NVMe passthru commands */
+		u16 reserved:2;
 	#endif
 		} adapter_operations4;
 	u8 pad[0x800 - 0x7FE]; /* 0x7FE pad to 2K for expansion */
@@ -1630,7 +1649,8 @@ union megasas_sgl_frame {
 typedef union _MFI_CAPABILITIES {
 	struct {
 #if   defined(__BIG_ENDIAN_BITFIELD)
-	u32     reserved:18;
+	u32     reserved:17;
+	u32	support_nvme_passthru:1;
 	u32     support_64bit_mode:1;
 	u32 support_pd_map_target_id:1;
 	u32     support_qd_throttling:1;
@@ -1660,7 +1680,8 @@ typedef union _MFI_CAPABILITIES {
 	u32     support_qd_throttling:1;
 	u32	support_pd_map_target_id:1;
 	u32     support_64bit_mode:1;
-	u32     reserved:18;
+	u32	support_nvme_passthru:1;
+	u32     reserved:17;
 #endif
 	} mfi_capabilities;
 	__le32		reg;
@@ -2268,6 +2289,7 @@ struct megasas_instance {
 	u32 nvme_page_size;
 	u8 adapter_type;
 	bool consistent_mask_64bit;
+	bool support_nvme_passthru;
 };
 struct MR_LD_VF_MAP {
 	u32 size;

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -181,6 +181,7 @@ static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
 static u32 support_poll_for_event;
 u32 megasas_dbg_lvl;
 static u32 support_device_change;
+static bool support_nvme_encapsulation;
 
 /* define lock for aen poll */
 spinlock_t poll_aen_lock;
@@ -3334,6 +3335,7 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 
 	case MFI_CMD_SMP:
 	case MFI_CMD_STP:
+	case MFI_CMD_NVME:
 		megasas_complete_int_cmd(instance, cmd);
 		break;
 
@@ -4721,6 +4723,8 @@ megasas_get_ctrl_info(struct megasas_instance *instance)
 			ci->adapterOperations3.useSeqNumJbodFP;
 		instance->support_morethan256jbod =
 			ci->adapter_operations4.support_pd_map_target_id;
+		instance->support_nvme_passthru =
+			ci->adapter_operations4.support_nvme_passthru;
 
 		/*Check whether controller is iMR or MR */
 		instance->is_imr = (ci->memory_size ? 0 : 1);
@@ -4737,6 +4741,8 @@ megasas_get_ctrl_info(struct megasas_instance *instance)
 			instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
 		dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
 			instance->secure_jbod_support ? "Yes" : "No");
+		dev_info(&instance->pdev->dev, "NVMe passthru support\t: %s\n",
+			 instance->support_nvme_passthru ? "Yes" : "No");
 		break;
 
 	case DCMD_TIMEOUT:
@@ -7110,7 +7116,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 		return -EINVAL;
 	}
 
-	if (ioc->frame.hdr.cmd >= MFI_CMD_OP_COUNT) {
+	if ((ioc->frame.hdr.cmd >= MFI_CMD_OP_COUNT) ||
+	    ((ioc->frame.hdr.cmd == MFI_CMD_NVME) &&
+	    !instance->support_nvme_passthru)) {
 		dev_err(&instance->pdev->dev,
 			"Received invalid ioctl command 0x%x\n",
 			ioc->frame.hdr.cmd);
@@ -7580,6 +7588,14 @@ static ssize_t dbg_lvl_store(struct device_driver *dd, const char *buf,
 }
 static DRIVER_ATTR_RW(dbg_lvl);
 
+static ssize_t
+support_nvme_encapsulation_show(struct device_driver *dd, char *buf)
+{
+	return sprintf(buf, "%u\n", support_nvme_encapsulation);
+}
+
+static DRIVER_ATTR_RO(support_nvme_encapsulation);
+
 static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
 {
 	sdev_printk(KERN_INFO, sdev, "SCSI device is removed\n");
@@ -7768,6 +7784,7 @@ static int __init megasas_init(void)
 
 	support_poll_for_event = 2;
 	support_device_change = 1;
+	support_nvme_encapsulation = true;
 
 	memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
 
@@ -7817,8 +7834,17 @@ static int __init megasas_init(void)
 	if (rval)
 		goto err_dcf_support_device_change;
 
+	rval = driver_create_file(&megasas_pci_driver.driver,
+				  &driver_attr_support_nvme_encapsulation);
+	if (rval)
+		goto err_dcf_support_nvme_encapsulation;
+
 	return rval;
 
+err_dcf_support_nvme_encapsulation:
+	driver_remove_file(&megasas_pci_driver.driver,
+			   &driver_attr_support_device_change);
+
 err_dcf_support_device_change:
 	driver_remove_file(&megasas_pci_driver.driver,
 			   &driver_attr_dbg_lvl);
@@ -7851,6 +7877,8 @@ static void __exit megasas_exit(void)
 	driver_remove_file(&megasas_pci_driver.driver,
 			   &driver_attr_release_date);
 	driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
+	driver_remove_file(&megasas_pci_driver.driver,
+			   &driver_attr_support_nvme_encapsulation);
 
 	pci_unregister_driver(&megasas_pci_driver);
 	unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");

drivers/scsi/megaraid/megaraid_sas_fusion.c

@@ -1079,6 +1079,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 
 	drv_ops->mfi_capabilities.support_qd_throttling = 1;
 	drv_ops->mfi_capabilities.support_pd_map_target_id = 1;
+	drv_ops->mfi_capabilities.support_nvme_passthru = 1;
 
 	if (instance->consistent_mask_64bit)
 		drv_ops->mfi_capabilities.support_64bit_mode = 1;
@@ -3993,7 +3994,13 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
 				result = RETURN_CMD;
 
 			break;
+		case MFI_CMD_NVME:
+			if (!instance->support_nvme_passthru) {
+				cmd_mfi->frame->hdr.cmd_status = MFI_STAT_INVALID_CMD;
+				result = COMPLETE_CMD;
+			}
 
+			break;
 		default:
 			break;
 		}