iio: convert to common i2c_check_functionality() return value

Previously most drivers that used a i2c_check_functionality() check
condition required various error codes on failure. This patchset
converts to a standard of -EOPNOTSUPP
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/mcp3422.c

@@ -339,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client,
 	u8 config;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!indio_dev)

drivers/iio/adc/ti-adc081c.c

@@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client,
 	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!iio)

drivers/iio/chemical/vz89x.c

@@ -249,7 +249,7 @@ static int vz89x_probe(struct i2c_client *client,
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
 		data->xfer = vz89x_smbus_xfer;
 	else
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;

drivers/iio/humidity/hdc100x.c

@@ -274,7 +274,7 @@ static int hdc100x_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)

drivers/iio/humidity/htu21.c

@@ -192,7 +192,7 @@ static int htu21_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));

drivers/iio/humidity/si7005.c

@@ -135,7 +135,7 @@ static int si7005_probe(struct i2c_client *client,
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)

drivers/iio/humidity/si7020.c

@@ -121,7 +121,7 @@ static int si7020_probe(struct i2c_client *client,
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WRITE_BYTE |
 				     I2C_FUNC_SMBUS_READ_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	/* Reset device, loads default settings. */
 	ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);

drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c

@@ -121,7 +121,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -ENOSYS;
+		return -EOPNOTSUPP;
 
 	regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
 	if (IS_ERR(regmap)) {

drivers/iio/light/bh1750.c

@@ -241,7 +241,7 @@ static int bh1750_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
 				I2C_FUNC_SMBUS_WRITE_BYTE))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)

drivers/iio/light/jsa1212.c

@@ -326,7 +326,7 @@ static int jsa1212_probe(struct i2c_client *client,
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)

drivers/iio/potentiometer/mcp4531.c

@@ -159,7 +159,7 @@ static int mcp4531_probe(struct i2c_client *client,
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WORD_DATA)) {
 		dev_err(dev, "SMBUS Word Data not supported\n");
-		return -EIO;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));

drivers/iio/pressure/mpl115_i2c.c

@@ -42,7 +42,7 @@ static int mpl115_i2c_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
 }

drivers/iio/pressure/ms5611_i2c.c

@@ -92,7 +92,7 @@ static int ms5611_i2c_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_WRITE_BYTE |
 				     I2C_FUNC_SMBUS_READ_WORD_DATA |
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (!indio_dev)

drivers/iio/pressure/ms5637.c

@@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));

drivers/iio/pressure/t5403.c

@@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR);
 	if (ret < 0)

drivers/iio/proximity/pulsedlight-lidar-lite-v2.c

@@ -278,7 +278,7 @@ static int lidar_probe(struct i2c_client *client,
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
 		data->xfer = lidar_smbus_xfer;
 	else
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	indio_dev->info = &lidar_info;
 	indio_dev->name = LIDAR_DRV_NAME;

drivers/iio/temperature/mlx90614.c

@@ -516,7 +516,7 @@ static int mlx90614_probe(struct i2c_client *client,
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)

drivers/iio/temperature/tmp006.c

@@ -205,7 +205,7 @@ static int tmp006_probe(struct i2c_client *client,
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	if (!tmp006_check_identification(client)) {
 		dev_err(&client->dev, "no TMP006 sensor\n");

drivers/iio/temperature/tsys01.c

@@ -190,7 +190,7 @@ static int tsys01_i2c_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));

drivers/iio/temperature/tsys02d.c

@@ -137,7 +137,7 @@ static int tsys02d_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));