sh_eth: RX checksum offload support
Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d381 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment