arm64: dts: meson: fix boards regulators states format

This fixes the following DT schemas check errors:
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts

@@ -66,8 +66,8 @@ tf_io: gpio-regulator-tf_io {
 		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 
-		states = <3300000 0
-			  1800000 1>;
+		states = <3300000 0>,
+			 <1800000 1>;
 	};
 
 	flash_1v8: regulator-flash_1v8 {

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -75,8 +75,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
-			  3300000 1>;
+		states = <1800000 0>,
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -77,8 +77,8 @@ tf_io: gpio-regulator-tf_io {
 		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 
-		states = <3300000 0
-			  1800000 1>;
+		states = <3300000 0>,
+			 <1800000 1>;
 	};
 
 	vcc1v8: regulator-vcc1v8 {

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -46,8 +46,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
-			  3300000 1>;
+		states = <1800000 0>,
+			 <3300000 1>;
 
 		regulator-settling-time-up-us = <10000>;
 		regulator-settling-time-down-us = <150000>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

@@ -38,8 +38,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
-			  3300000 1>;
+		states = <1800000 0>,
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -38,8 +38,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
-			  3300000 1>;
+		states = <1800000 0>,
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {