Commit f97d0d7a authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Thomas Petazzoni

clk: mvebu: add clock gating control provider for DT

This driver allows to provide DT clocks for clock gates found on
Marvell Dove and Kirkwood SoCs. The clock gates are referenced by
the phandle index of the corresponding bit in the clock gating control
register to ease lookup in the datasheet.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
parent ab8ba01b
* Gated Clock bindings for Marvell Orion SoCs
Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
some power. The clock consumer should specify the desired clock by having
the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
the corresponding clock gating control bit in HW to ease manual clock lookup
in datasheet.
The following is a list of provided IDs for Dove:
ID Clock Peripheral
-----------------------------------
0 usb0 USB Host 0
1 usb1 USB Host 1
2 ge Gigabit Ethernet
3 sata SATA Host
4 pex0 PCIe Cntrl 0
5 pex1 PCIe Cntrl 1
8 sdio0 SDHCI Host 0
9 sdio1 SDHCI Host 1
10 nand NAND Cntrl
11 camera Camera Cntrl
12 i2s0 I2S Cntrl 0
13 i2s1 I2S Cntrl 1
15 crypto CESA engine
21 ac97 AC97 Cntrl
22 pdma Peripheral DMA
23 xor0 XOR DMA 0
24 xor1 XOR DMA 1
30 gephy Gigabit Ethernel PHY
Note: gephy(30) is implemented as a parent clock of ge(2)
The following is a list of provided IDs for Kirkwood:
ID Clock Peripheral
-----------------------------------
0 ge0 Gigabit Ethernet 0
2 pex0 PCIe Cntrl 0
3 usb0 USB Host 0
4 sdio SDIO Cntrl
5 tsu Transp. Stream Unit
6 dunit SDRAM Cntrl
7 runit Runit
8 xor0 XOR DMA 0
9 audio I2S Cntrl 0
14 sata0 SATA Host 0
15 sata1 SATA Host 1
16 xor1 XOR DMA 1
17 crypto CESA engine
18 pex1 PCIe Cntrl 1
19 ge1 Gigabit Ethernet 0
20 tdm Time Division Mplx
Required properties:
- compatible : shall be one of the following:
"marvell,dove-gating-clock" - for Dove SoC clock gating
"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
- reg : shall be the register address of the Clock Gating Control register
- #clock-cells : from common clock binding; shall be set to 1
Optional properties:
- clocks : default parent clock phandle (e.g. tclk)
Example:
gate_clk: clock-gating-control@d0038 {
compatible = "marvell,dove-gating-clock";
reg = <0xd0038 0x4>;
/* default parent clock is tclk */
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
sdio0: sdio@92000 {
compatible = "marvell,dove-sdhci";
/* get clk gate bit 8 (sdio0) */
clocks = <&gate_clk 8>;
};
......@@ -4,3 +4,5 @@ config MVEBU_CLK_CORE
config MVEBU_CLK_CPU
bool
config MVEBU_CLK_GATING
bool
obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o
obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o
obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o
/*
* Marvell MVEBU clock gating control.
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Andrew Lunn <andrew@lunn.ch>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/clk/mvebu.h>
#include <linux/of.h>
#include <linux/of_address.h>
struct mvebu_gating_ctrl {
spinlock_t lock;
struct clk **gates;
int num_gates;
};
struct mvebu_soc_descr {
const char *name;
const char *parent;
int bit_idx;
};
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
static struct clk __init *mvebu_clk_gating_get_src(
struct of_phandle_args *clkspec, void *data)
{
struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data;
int n;
if (clkspec->args_count < 1)
return ERR_PTR(-EINVAL);
for (n = 0; n < ctrl->num_gates; n++) {
struct clk_gate *gate =
to_clk_gate(__clk_get_hw(ctrl->gates[n]));
if (clkspec->args[0] == gate->bit_idx)
return ctrl->gates[n];
}
return ERR_PTR(-ENODEV);
}
static void __init mvebu_clk_gating_setup(
struct device_node *np, const struct mvebu_soc_descr *descr)
{
struct mvebu_gating_ctrl *ctrl;
struct clk *clk;
void __iomem *base;
const char *default_parent = NULL;
int n;
base = of_iomap(np, 0);
clk = of_clk_get(np, 0);
if (!IS_ERR(clk)) {
default_parent = __clk_get_name(clk);
clk_put(clk);
}
ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL);
if (WARN_ON(!ctrl))
return;
spin_lock_init(&ctrl->lock);
/*
* Count, allocate, and register clock gates
*/
for (n = 0; descr[n].name;)
n++;
ctrl->num_gates = n;
ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *),
GFP_KERNEL);
if (WARN_ON(!ctrl->gates)) {
kfree(ctrl);
return;
}
for (n = 0; n < ctrl->num_gates; n++) {
const char *parent =
(descr[n].parent) ? descr[n].parent : default_parent;
ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent,
0, base, descr[n].bit_idx, 0, &ctrl->lock);
WARN_ON(IS_ERR(ctrl->gates[n]));
}
of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl);
}
/*
* SoC specific clock gating control
*/
#ifdef CONFIG_ARCH_DOVE
static const struct mvebu_soc_descr __initconst dove_gating_descr[] = {
{ "usb0", NULL, 0 },
{ "usb1", NULL, 1 },
{ "ge", "gephy", 2 },
{ "sata", NULL, 3 },
{ "pex0", NULL, 4 },
{ "pex1", NULL, 5 },
{ "sdio0", NULL, 8 },
{ "sdio1", NULL, 9 },
{ "nand", NULL, 10 },
{ "camera", NULL, 11 },
{ "i2s0", NULL, 12 },
{ "i2s1", NULL, 13 },
{ "crypto", NULL, 15 },
{ "ac97", NULL, 21 },
{ "pdma", NULL, 22 },
{ "xor0", NULL, 23 },
{ "xor1", NULL, 24 },
{ "gephy", NULL, 30 },
{ }
};
#endif
#ifdef CONFIG_ARCH_KIRKWOOD
static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = {
{ "ge0", NULL, 0 },
{ "pex0", NULL, 2 },
{ "usb0", NULL, 3 },
{ "sdio", NULL, 4 },
{ "tsu", NULL, 5 },
{ "runit", NULL, 7 },
{ "xor0", NULL, 8 },
{ "audio", NULL, 9 },
{ "sata0", NULL, 14 },
{ "sata1", NULL, 15 },
{ "xor1", NULL, 16 },
{ "crypto", NULL, 17 },
{ "pex1", NULL, 18 },
{ "ge1", NULL, 19 },
{ "tdm", NULL, 20 },
{ }
};
#endif
static const __initdata struct of_device_id clk_gating_match[] = {
#ifdef CONFIG_ARCH_DOVE
{
.compatible = "marvell,dove-gating-clock",
.data = dove_gating_descr,
},
#endif
#ifdef CONFIG_ARCH_KIRKWOOD
{
.compatible = "marvell,kirkwood-gating-clock",
.data = kirkwood_gating_descr,
},
#endif
{ }
};
void __init mvebu_gating_clk_init(void)
{
struct device_node *np;
for_each_matching_node(np, clk_gating_match) {
const struct of_device_id *match =
of_match_node(clk_gating_match, np);
mvebu_clk_gating_setup(np,
(const struct mvebu_soc_descr *)match->data);
}
}
/*
* Marvell EBU gating clock handling
*
* Copyright (C) 2012 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MVEBU_CLK_GATING_H
#define __MVEBU_CLK_GATING_H
#ifdef CONFIG_MVEBU_CLK_GATING
void __init mvebu_gating_clk_init(void);
#else
void mvebu_gating_clk_init(void) {}
#endif
#endif
......@@ -17,9 +17,11 @@
#include <linux/of.h>
#include "clk-core.h"
#include "clk-cpu.h"
#include "clk-gating-ctrl.h"
void __init mvebu_clocks_init(void)
{
mvebu_core_clk_init();
mvebu_gating_clk_init();
mvebu_cpu_clk_init();
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment